Standards in PARTsolutions

The Strategic Parts Management PARTsolutions by CADENAS offers engineers access to engineering data from all the most used standard components.

An overview of the available standards can be found here:

Included
IS 6392Steel pipe flanges, integral flanges, nominal pressure 10 N/mm²
IS 6392Steel pipe flanges, integral flanges, nominal pressure 16 N/mm²
IS 6392Steel pipe flanges, integral flanges, nominal pressure 1.6 N/mm²
IS 6392Steel pipe flanges, integral flanges, nominal pressure 2.5 N/mm²
IS 6392Steel pipe flanges, Integral flanges, Nominal pressure 4.0 N/mm2
IS 6392Steel pipe flanges, integral flanges, nominal pressure 6.4 N/mm²
IS 6392Steel pipe flanges, loose flanges for welded on lapped pipe ends, nominal pressure 0.60 N/mm²
IS 6392Steel pipe flanges, loose flanges for welded on lapped pipe ends, nominal pressure 1 N/mm²
IS 6392Steel pipe flanges, plate blank flanges, nominal pressure 0.60 N/mm²
IS 6392Steel pipe flanges, plate blank flanges, nominal pressure 1 N/mm²
IS 6392Steel pipe flanges, plate blank flanges, nominal pressure 1.6 N/mm²
IS 6392Steel pipe flanges, plate blank flanges, nominal pressure 2.5 N/mm²
IS 6392Steel pipe flanges, plate blank flanges, nominal pressure 4.0 N/mm²
IS 6392Steel pipe flanges, plate flanges for welding, nominal pressure 0.25 N/mm²
IS 6392Steel pipe flanges, plate flanges for welding, nominal pressure 0.60 N/mm²
IS 6392Steel pipe flanges, plate flanges for welding, nominal pressure 1 N/mm²
IS 6392Steel pipe flanges, plate flanges for welding, nominal pressure 10 N/mm²
IS 6392Steel pipe flanges, plate flanges for welding, nominal pressure 16 N/mm²
IS 6392Steel pipe flanges, plate flanges for welding, nominal pressure 1.6 N/mm²
IS 6392Steel pipe flanges, plate flanges for welding, nominal pressure 2.5 N/mm²
IS 6392Steel pipe flanges, plate flanges for welding, nominal pressure 4.0 N/mm²
IS 6392Steel pipe flanges, plate flanges for welding, nominal pressure 6.4 N/mm²
IS 6392Steel pipe flanges, screwed boss flanges, nominal pressure 0.60 N/mm²
IS 6392Steel pipe flanges, screwed boss flanges, nominal pressure 10 N/mm²
IS 6392Steel pipe flanges, screwed boss flanges, nominal pressure 1 and 1.6 N/mm²
IS 6392Steel pipe flanges, screwed boss flanges, nominal pressure 2.5 and 4.0 N/mm²
IS 6392Steel pipe flanges, screwed boss flanges, nominal pressure 6.4 N/mm²
IS 6392Steel pipe flanges, slip-on boss flange for welding, nominal pressure 0.60 N/mm²
IS 6392Steel pipe flanges, slip-on boss flange for welding, nominal pressure 1 N/mm²
IS 6392Steel pipe flanges, slip-on boss flange for welding, nominal pressure 1.6 N/mm²
IS 6392Steel pipe flanges, slip-on boss flange for welding, nominal pressure 2.5 N/mm²
IS 6392Steel pipe flanges, slip-on boss flange for welding, nominal pressure 4.0 N/mm²
IS 6392Steel pipe flanges, welding neck flanges, nominal pressure 0.25 N/mm²
IS 6392Steel pipe flanges, welding neck flanges, nominal pressure 0.60 N/mm²
IS 6392Steel pipe flanges, welding neck flanges, nominal pressure 1 N/mm²
IS 6392Steel pipe flanges, welding neck flanges, nominal pressure 10 N/mm²
IS 6392Steel pipe flanges, welding neck flanges, nominal pressure 16 N/mm²
IS 6392Steel pipe flanges, welding neck flanges, nominal pressure 1.6 N/mm²
IS 6392Steel pipe flanges, welding neck flanges, nominal pressure 2.5 N/mm²
IS 6392Steel pipe flanges, welding neck flanges, nominal pressure 4.0 N/mm²
IS 6392Steel pipe flanges, welding neck flanges, nominal pressure 6.4 N/mm²
IS 4866Welded shell flanges for carbon steel pressure vessels and equipment
IS 4867Welded neck shell flanges for carbon steel pressure vessels and equipment
IS 4868Welded shell flanges for stainless steel pressure vessels and equipment
IS 4869Welded shell flanges with hub for stainless steel presure vessels and equipment
IS 1978Plain-end line pipes
IS 1978Standard-weight threaded line pipes
IS 3589Steel pipes for water and sewage
IS 280Mild steel wire for general engineering purposes
IS 2315 OThimbles, Type O
IS 2315 RThimbles, Type R
IS 2315 SThimbles, Type S
IS 2315 OTThimbles, Type OT
IS 2266 CF 6x7Round 6x7 Steel wire ropes with Fibre core (CF)
IS 2266 CWR 6x7Round 6x7 Steel wire ropes with Steel core (CWR)
IS 2266 CF 6x19MRound 6x19M Steel wire ropes with Fibre core (CF)
IS 2266 CWR 6x19MRound 6x19M Steel wire ropes with Steel core (CWR)
IS 2266 CF 6x37MRound 6x37M Steel wire ropes with Fibre core (CF)
IS 2266 CWR 6x37MRound 6x37M Steel wire ropes with Steel core (CWR)
IS 2266 CF 6x17SRound 6x17S Steel wire ropes with Fibre core (CF)
IS 2266 CWR 6x17SRound 6x17S Steel wire ropes with Steel core (CWR)
IS 2266 CF 6x19SRound 6x19S Steel wire ropes with Fibre core (CF)
IS 2266 CWR 6x19SRound 6x19S Steel wire ropes with Steel core (CWR)
IS 2266 CF 6x21FRound 6x21F Steel wire ropes with Fibre core (CF)
IS 2266 CWR 6x21FRound 6x21F Steel wire ropes with Steel core (CWR)
IS 2266 CF 6x26SWRound 6x26SW Steel wire ropes with Fibre core (CF)
IS 2266 CWR 6x26SWRound 6x26SW Steel wire ropes with Steel core (CWR)
IS 2266 CF 6x31SWRound 6x31SW Steel wire ropes with Fibre core (CF)
IS 2266 CWR 6x31SWRound 6x31SW Steel wire ropes with Steel core (CWR)
IS 2266 CF 6x36SWRound 6x36SW Steel wire ropes with Fibre core (CF)
IS 2266 CWR 6x36SWRound 6x36SW Steel wire ropes with Steel core (CWR)
IS 2266 CF 6x41SWRound 6x41SW Steel wire ropes with Fibre core (CF)
IS 2266 CWR 6x41SWRound 6x41SW Steel wire ropes with Steel core (CWR)
IS 2266 CF 6x49SWSRound 6x49SWS Steel wire ropes with Fibre core (CF)
IS 2266 CWR 6x49SWSRound 6x49SWS Steel wire ropes with Steel core (CWR)
IS 2266 CF 6x55SWSRound 6x55SWS Steel wire ropes with Fibre core (CF)
IS 2266 CWR 6x55SWSRound 6x55SWS Steel wire ropes with Steel core (CWR)
IS 2266 CF 8x19SRound 8x19S Steel wire ropes with Fibre core (CF)
IS 2266 CWR 8x19SRound 8x19S Steel wire ropes with Steel core (CWR)
IS 2266 CF 8x25FRound 8x25F Steel wire ropes with Fibre core (CF)
IS 2266 CWR 8x25FRound 8x25F Steel wire ropes with Steel core (CWR)
IS 2266 CF 8x36SWRound 8x36SW Steel wire ropes with Fibre core (CF)
IS 2266 CWR 8x36SWRound 8x36SW Steel wire ropes with Steel core (CWR)
IS 2266 CF 8x37SFRound 8x37SF Steel wire ropes with Fibre core (CF)
IS 2266 CWR 8x37SFRound 8x37SF Steel wire ropes with Steel core (CWR)
IS 2266 CF 17x7Round 17x7 Steel wire ropes with Fibre core (CF)
IS 2266 CWR 17x7Round 17x7 Steel wire ropes with Steel core (CWR)
IS 2266 CF 18x7Round 18x7 Steel wire ropes with Fibre core (CF)
IS 2266 CWR 18x7Round 18x7 Steel wire ropes with Steel core (CWR)
IS 2266 CF 34x7Round 34x7 Steel wire ropes with Fibre core (CF)
IS 2266 CWR 34x7Round 34x7 Steel wire ropes with Steel core (CWR)
IS 2266 CF 36x7Round 36x7 Steel wire ropes with Fibre core (CF)
IS 2266 CWR 36x7Round 36x7 Steel wire ropes with Steel core (CWR)
IS 2266 12x6:3x24Oval 12x6:3x24 (15/9-Fibre)
IS 2266 CF 6xV25Flattened strand 6xV25 Steel wire ropes with Fibre core (CF)
IS 2266 CWR 6xV25Flattened strand 6xV25 Steel wire ropes with Steel core (CWR)
IS 2365 6x19 (12/6/1)Steel wire suspension ropes for lifts, elevators and hoists
IS 2365 6x19 (9/9/1)Steel wire suspension ropes for lifts, elevators and hoists
IS 2365 6x19 (12/6+6F/1)Steel wire suspension ropes for lifts, elevators and hoists
IS 2365 8x19 (9/9/1)Steel wire suspension ropes for lifts, elevators and hoists
IS 2365 8x19 (12/6+6F/1)Steel wire suspension ropes for lifts, elevators and hoists
IS 2904 A1Fixed ball handles, type A form 1
IS 2904 A2Fixed ball handles, type A form 2
IS 2904 B1Free ball handles, type B form 1
IS 2904 B2Free ball handles, type B form 2
IS 2890 KTaper handles for machine tools
IS 2890 LTaper handles for machine tools
IS 2890 MTaper handles for machine tools
IS 2890 NTaper handles for machine tools
IS 2890 PTaper handles for machine tools
IS 2890 RTaper handles for machine tools
IS 3048Metal handwheels without handle
IS 3048Plastic handwheels without handle
IS 3048Metal handwheels with free ball handle
IS 3048Plastic handwheels with free ball handle
IS 3048Metal handwheels with fixed ball handle
IS 3048Plastic handwheels with fixed ball handle
IS 1730 ISSHSteel sheets, form ISSH
IS 3502Steel chequered plates
IS 513Cold reduced low carbon steel sheets and strips
IS 1730 ISFHot rolled steel flats, form ISF
IS 1730 ISPLSteel plates, form ISPL
IS 6911Stainless steel plate, sheet and strip
IS 2314 ISPS FSteel sheet piling sections, type Flat
IS 2314 ISPS USteel sheet piling sections, type U
IS 2314 ISPS ZSteel sheet piling sections, type Z
IS 1161Steel tubes
IS 1730 ISSTSteel strips, form ISST
IS 1732 ISROHot rolled round steel bars, form ISRO
IS 1732 ISSQHot rolled square steel bars, form ISSQ
IS 2687Cap nuts, series 1
IS 2687Cap nuts, series 2
IS 2687Cap nuts, series 3
IS 6623High strength structural nuts
IS 2232 PSlotted and castle nuts, precision grade
IS 2232 BSlotted and castle nuts, black grade
IS 4178Eyenuts with collars, range M42 to M100
IS 4178Eyenuts with collars, range M10 to M36
IS 5368Thin slotted and castle nuts, black grade (B)
IS 5368Thin slotted and castle nuts, precision grade (P)
IS 11428 A1-SShort radius elbows 90°, seamless, type A1
IS 11428 A1-WShort radius elbows 90°, welded, type A1
IS 11428 A2-SLong radius elbows 90°, seamless, type A2
IS 11428 A2-WLong radius elbows 90°, welded, type A2
IS 11428 A3-SLong radius elbows 45°, seamless, type A3
IS 11428 A3-WLong radius elbows 45°, welded, type A3
IS 11428 B1-SEccentric reducers, seamless, type B1
IS 11428 B1-WEccentric reducers, welded, type B1
IS 11428 B2-SConcentric reducers, seamless, type B2
IS 11428 B2-WConcentric reducers, welded, type B2
IS 11428 C1-SShort radius returns 180°, seamless, type C1
IS 11428 C1-WShort radius returns 180°, welded, type C1
IS 11428 C2-SLong radius returns 180°, seamless, type C2
IS 11428 C2-WLong radius returns 180°, welded, type C2
IS 11428 D1-SCaps, seamless, type D1
IS 11428 D1-WCaps, welded, type D1
IS 11428 E1-SEqual tees, seamless, type E1
IS 11428 E1-WEqual tees, welded, type E1
IS 11428 E2-SUnequal tees, seamless, type E2
IS 11428 E2-WUnequal tees, welded, type E2
IS 11428 E1-SEqual crosses, seamless, type E1
IS 11428 E1-WEqual crosses, welded, type E1
IS 11428 E2-SUnequal crosses, seamless, type E2
IS 11428 E2-WUnequal crosses, welded, type E2
IS 1239-1Steel tubes, Part 1
IS 1239-2Running nipples, Part 2
IS 1239-2Close taper nipples, Part 2
IS 1239-2Barrel nipples, Part 2
IS 1239-2Bushes, Part 2
IS 1239-2Hexagon nipples, Part 2
IS 1239-2Bends 90°, type 1, Part 2
IS 1239-2Bends 90°, type 1A, Part 2
IS 1239-2Bends 112,5°, type 2, Part 2
IS 1239-2Bends 135°, type 3, Part 2
IS 1239-2Bends 157.5°, type 4, Part 2
IS 1239-2Return bends, Part 2
IS 1239-2Elbows equal, Part 2
IS 1239-2Elbows reducing, Part 2
IS 1239-2Elbows side outlet equal, Part 2
IS 1239-2Elbows, male & female, equal, Part 2
IS 1239-2Elbows 135°, equal
IS 1239-2Elbows male, Part 2
IS 1239-2Twins elbow, male, equal, Part 2
IS 1239-2Y-pieces, equal, Part 2
IS 1239-2Y pieces, male, equal, Part 2
IS 1239-2Tees equal, Part 2
IS 1239-2Tees, Reducing, Part 2
IS 1239-2Tees, Reducing on the run and branch, Part 2
IS 1239-2Tees increasing, Part 2
IS 1239-2Tees side outlet equal, Part 2
IS 1239-2Tees Male, Part 2
IS 1239-2Angle tees, male, equal, Part 2
IS 1239-2Sweeps tee, male, equal, Part 2
IS 1239-2Crosses equal, Part 2
IS 1239-2Crosses, reducing, Part 2
IS 1239-2Crosses side outlet equal, Part 2
IS 1239-2Crosses Male, Part 2
IS 1239-2Union bends, Part 2
IS 1239-2Pipes union, Part 2
IS 1239-2Steel sockets, Part 2
IS 1239-2Sockets reducing, Part 2
IS 1239-2Sockets union, Part 2
IS 1239-2Caps, Part 2
IS 1239-2Plugs, Part 2
IS 1239-2Taper screw plugs, Part 2
IS 1879Elbows, type A1
IS 1879Elbows, type A1/45°
IS 1879Elbows, reducing, type A1
IS 1879Male and female elbows, type A4
IS 1879Male and female elbows, type A4/45°
IS 1879Elbows, reducing, type A4
IS 1879Tees, type B1
IS 1879Tees, reducing or increasing on the branch, type B1
IS 1879Tees, reducing on the run, reducing, equal to or increasing on the branch, type B1
IS 1879Crosses, type C1
IS 1879Crosses, reducing, type C1
IS 1879Bends, type D1
IS 1879Male and female bends, type D4
IS 1879Pitcher tees, type E1
IS 1879Pitcher tees, reducing on the branch, reducing on the run and reducing on branch and run, type E1
IS 1879Twin elbows, type E2
IS 1879Twin elbows, reducing, type E2
IS 1879Long weep bends, type G1
IS 1879Long sweep bends, type G1/45°
IS 1879Male and female long sweep bends, type G4
IS 1879Male and female long weep bends, type G4/45°
IS 1879Male long sweep bends, type G8
IS 1879Return bends, type Kb1
IS 1879Eccentric sockets reducing, type M3
IS 1879Sockets, right and left-hand thread, type M2 R-L
IS 1879Male and female sockets, type M4
IS 1879Sockets, reducing, type M2
IS 1879Male and female sockets, reducing, type M4
IS 1879Bushing and hexagon nipples, type N4
IS 1879Hexagon nipples, type N8
IS 1879Hexagon nipples, Right and left-hand thread, type N8 R-L
IS 1879Hexagon nipples, reducing, type N8
IS 1879Backnuts, type P4
IS 1879Hexagon caps, type T1
IS 1879Countersunk plugs, type T11
IS 1879Round caps, type T2
IS 1879Plain plugs, type T8
IS 1879Beaded plugs, type T9
IS 1879Unions, flat seat, type U1
IS 1879Unions, taper seat, type U11
IS 1879Male and female unions, taper seat, type U12
IS 1879Male and female unions, flat seat, type U2
IS 1879Union elbows, flat seat, type UA1
IS 1879Union elbows, taper seat, type UA11
IS 1879Male and female union elbows, taper seat, type UA12
IS 1879Male and female union elbows, flat seat, type UA2
IS 1879Side outlet elbows, type Za1
IS 1879Side outlet tees, type Za2
IS 4712Socket welding fittings, 45° elbow, class 20
IS 4712Socket welding fittings, 45° elbow, class 40
IS 4712Socket welding fittings, 90° elbow, class 20
IS 4712Socket welding fittings, 90° elbow, class 40
IS 4712Socket welding fittings, cross, class 20
IS 4712Socket welding fittings, Cross, class 40
IS 4712Socket welding fittings, coupling, class 20
IS 4712Socket welding fittings, coupling, class 40
IS 4712Socket welding fittings, half-coupling, class 20
IS 4712Socket welding fittings, half-coupling, class 40
IS 4712Socket welding fittings, tee, class 20
IS 4712Socket welding fittings, tee, class 40
IS 6094-1Hexagon socket set screws with flat point
IS 6094-2Hexagon socket set screws with cone point
IS 6094-3Hexagon socket set screws with dog point
IS 6094-4Hexagon socket set screws with cup point
IS 1120Hexagon head coach screws
IS 1364-1Hexagon head bolts part 1 (size range M1.6 to M64)
IS 3640Hexagon fit bolts with long thread
IS 3757High Strength Stuctural Bolts
IS 6639Hexagon bolts for steel structures
IS 6761Countersunk head screws with hexagon socket
IS 2014T-bolts
IS 4190Eye bolts with collars
IS 5624Foundation bolts
IS 5624 AFoundation bolts, Type A
IS 5624 BFoundation bolts, Type B
IS 5624 CFoundation bolts, Type C
IS 5624 DFoundation bolts, Type D
IS 5624 EFoundation bolts, Type E
IS 5624 FFoundation bolts, Type F
IS 5624 GFoundation bolts, Type G
IS 9645Hexagon socket pipe plugs
IS 2269Hexagon socket head cap screws
IS 6101Slotted pan head screws
IS 4297Conical seats, type A
IS 4297Conical seats, type B
IS 4297Spherical washers
IS 3121 TBTubular bodies
IS 3121 SEScrewed eyes
IS 3121 RSSERigging screws with screwed eyes at both ends
IS 3121 RSEFRigging screws with screwed eyes and shackle at one end and screwed fork and thimble at other end
IS 3121 RSERRigging screws with screwed eyes and shackle at one end and wire rope socket at other end
IS 3121 STEScrewed stud eyes
IS 3121 SFScrewed forks
IS 3121 OBOpen bodies
IS 3121 SSEShort screwed eyes
IS 3121 LSELong screwed eyes
IS 3121 SWESwivel eyes
IS 3121 SSDEStretching screws double ended type
IS 3121 SSSEStretching screws single ended type
IS 10182-1 TS-L1Hot rolled track shoe sections
IS 10182-2 TS-H1Hot rolled track shoe sections
IS 1173 ISDTHot rolled and slit steel tee bars, deep legged tee bars, form ISDT
IS 1173 ISHTHot rolled and slit steel tee bars from H-sections, form ISHT
IS 1173 ISLTHot rolled and slit steel tee bars, light weight tee bars, form ISLT
IS 1173 ISMTHot rolled and slit steel tee bars, medium weight tee bars, form ISMT
IS 1173 ISNTHot rolled and slit steel tee bars, rolled normal tee bars, form ISNT
IS 1252 BAHot rolled steel bulb angels, L-beams, form BA
IS 12778 NPBHot rolled parallel flange steel sections for beams, narrow flange beams
IS 12778 PBPHot rolled parallel flange steel sections for beams, parallel flange bearing piles
IS 12778 WPBHot rolled parallel flange steel sections for beams, wide flange beams
IS 1863Rolled steel bulb flats
IS 3443Crane rails, clause 8.1
IS 3443Crane rails, clause 0.3 and 8.3
IS 3954 CHGHot rolled steel channel sections
IS 3964Light rails
IS 4923Rectangular hollow sections
IS 4923Square hollow sections
IS 808 LHot rolled steel beams, L-beam
IS 808 HBHot rolled steel beams, heavy weight beam
IS 808 JBHot rolled steel beams, junior beam
IS 808 JCHot rolled steel beams, junior channel
IS 808 LBHot rolled steel beams, light weight beam
IS 808 LCHot rolled steel beams, light weight channel
IS 808 MBHot rolled steel beams, medium flange beam
IS 808 MCHot rolled steel beams, medium weight channel
IS 808 MCPHot rolled steel beams, parallel flange channel
IS 808 SCHot rolled steel beams, heavy weight beam
IS 808 WBHot rolled steel beams, wide flange beam
IS 1928 1Boiler rivets, figure 1, snap head
IS 1928 2Boiler rivets, figure 2, ipsoid head
IS 1928 3Boiler rivets, figure 3, pan head, type 1
IS 1928 4Boiler rivets, figure 4, pan head, type 2
IS 1928 5Boiler rivets, figure 5, pan head with tappered neck
IS 1928 6Boiler rivets, figure 6, conical head
IS 1928 7Boiler rivets, figure 7, countersunk head
IS 1928 8Boiler rivets, figure 8, rounded countersunk head
IS 1928 9Boiler rivets, figure 9, steeple head
IS 2393Parallel pins, of unhardened steel and austenitic stainless steel
IS 3524-1Taper pins with inner thread
IS 3524-2Taper pins with external thread
IS 6688 ATaper pins, not hardened, form A
IS 6688 BTaper pins, not hardened, form B
IS 5988Spring dowel sleeves, light pattern
IS 5988Spring dowel sleeves, heavy pattern
IS 2638Flat split cotters, black grade
IS 2638Flat split cotters, precision grade
IS 549Split pins
IS 6862 AClevis pins without head, form A
IS 6862 BClevis pins without head, form B
IS 6863 AClevis pins with Head, form A
IS 6863 BClevis pins with Head, form B
IS 4870 FBFlat gaskets for shell flanges, form FB
IS 4870 FSFlat gaskets for shell flanges, form FS
IS 2048 AParallel keys, type A
IS 2048 BParallel keys, type B
IS 2048 CParallel keys, type C
IS 2048 DParallel keys, type D
IS 2048 EParallel keys, type E
IS 2048 EoSParallel keys, type EoS
IS 2048 FParallel keys, type F
IS 2048 FoSParallel keys, type FoS
IS 2048 GParallel keys, type G
IS 2048 HParallel keys, type H
IS 2048 JParallel keys, type J
IS 2292 ATaper keys, Form A
IS 2292 BTaper keys, Form B
IS 2292 CTaper keys, Form C
IS 6166 AThin taper keys, type A
IS 6166 BThin taper keys, type B
IS 6166 CThin taper keys, type C
IS 6166Thin taper keys, gib head key
IS 6167 AThin parallel keys, type A
IS 6167 BThin parallel keys, type B
IS 6167 CThin parallel keys, type C
IS 3075-1Circlips for shafts
IS 3075-2Circlips for bores
IS 3075-3Circlips for shafts, type E
IS 4431Carbon and carbon-manganese free-cutting steel, circular section impact test piece
IS 4431Carbon and carbon-manganese free-cutting steel, circular section tensile test piece
IS 4431Carbon and carbon-manganese free-cutting steel, rectangular section impact test piece
IS 4431Carbon and carbon-manganese free-cutting steel, rectangular section tensile test piece
IS 2758Mild steel point hooks for use with wire rope thimbles
IS 2759Higher tensile steel point hooks for use with wire rope thimbles
IS 3815Circular section point hooks with shank
IS 3815Special trapezoidal section point hooks with shank
IS 3815Standard trapezoidal section point hooks with shank
IS 5749Circular section point hooks with shank
IS/ISO 2415 WScrewed pins with eye und collar, type W
IS/ISO 2415 XBolts with hexagon head, hexagon nut and split cotter pin, type X
IS/ISO 2415 YCountersunk and slotted head pins, type Y
IS/ISO 2415 DDee shackles
IS/ISO 2415 BBow shackles
IS/ISO 2415 DDee shackles with pin
IS/ISO 2415 BBow shackles with pin
IS 2485 ODrop forged sockets for wire ropes, open type
IS 2485 CDrop forged sockets for wire ropes, closed type
IS 3822Eye hooks for use with chains
IS 2637-SSteel roller chains, type S
IS 2637-CSteel roller chains, type C
IS 2637-C F1Steel roller chains, type C, F1 attachment plates
IS 2637-C F4Steel roller chains, type C, F4 attachment plates
IS 2637-S F4Steel roller chains, type S, F4 attachment plates
IS 2637-S K1Steel roller chains, type S, K1 attachment plates
IS 2637-C K1Steel roller chains, type C, K1 attachment plates
IS 2637-S M1Steel roller chains, type S, M1 attachment plates
IS 2637Chain wheels for steel roller chains type S and C
IS 2760 ASteel chain slings, Master Link A
IS 2760 B1Steel chain slings, Joining Link B1
IS 2760 O-RingSteel chain slings, Suspension O-Ring
IS 2760 H1Steel chain slings, Single-Leg Sling
IS 2760 H2Steel chain slings, Two-Leg Sling
IS 2760 H3Steel chain slings, Three-Leg Sling
IS 2760 H3ASteel chain slings, Three-Leg Sling
IS 2760 H4Steel chain slings, Four-Leg Sling
IS 2760 ASteel chain slings, Master Link A
IS 2760 B1Steel chain slings, Joining Link B1
IS 2760 O-RingSteel chain slings, Suspension O-Ring
IS 2760 H1Steel chain slings, Single-Leg Sling
IS 2760 H2Steel chain slings, Two-Leg Sling
IS 2760 H3Steel chain slings, Three-Leg Sling
IS 2760 H3ASteel chain slings, Three-Leg Sling
IS 2760 H4Steel chain slings, Four-Leg Sling
IS 2429 Type 1Round Steel Short Link Chains (Electric Butt Welded)
IS 2429 Type 2Round Steel Short Link Chains (Electric Butt Welded)
IS 2016Machined washers
IS 2016 APunched washers, type A, for hexagonal bolts and screws
IS 2016 BPunched washers, type B, for round and cheese head screws
IS 3063 ASpring lock washers with bent ends, type A
IS 3063 BSpring lock washers with flat ends, type B
IS 5370Plain washers with outside diameter, type A
IS 5370Plain washers with outside diameter, type B
IS 5372Taper washers for channels
IS 5374Taper washers for I-Beams
IS 5554Lock washers with lug
IS 6610Heavy washers for steel structures
IS 6649Plain hole circular washers, type A
IS 6649Square taper washers, type B
IS 6649Square taper washers, type C
IS 6735Spring lock washers for screws with cylindrical heads
IS 4762Worm drive hose clamps for general purposes
IS 4009-1Button head grease nipples
IS 4009-2 AConical head grease nipples, type A
IS 4009-2 BConical head grease nipples, type B
IS 4009-2 CConical head grease nipples, type C
IS 4009-2 DConical head grease nipples, type D
IS 4009-3 AGrease nipples, type A
IS 4009-3 BGrease nipples, type B
IS 4009-3 CGrease nipples, type C
IS 4009-3 DGrease nipples, type D
IS 5548Straight nipple adaptors
IS 5548Angle nipple adaptors

Status: 09/2023

Factory Standards & Repetitive Parts Available Manufacturer Catalogs

Success Stories

Wanzl Metallwarenfabrik GmbH
Wanzl Metallwarenfabrik GmbH

Wanzl shortens research and design times for the development of a new shopping cart by more than 2 hours with the Strategic Parts Management PARTsolutions powered by CADENAS.

MAN Truck & Bus AG
MAN Truck & Bus AG

By means of PARTsolutions by CADENAS all parts including complex geometries are traceable across different system and locations of the MAN Truck & Bus AG

SMS group
SMS group

SMS group avoids duplicates and offers the best possible data quality through PARTsolutions.

Starlinger & Co. GmbH
Starlinger & Co. GmbH

High reuse of parts in the product development process based on PARTsolutions.