2.13. V11.00 SP0
2.13.2. Release Notes V11.00 SP0
Prev  Next

2.13.2. Release Notes V11.00 SP0

Component Common

  • Issue #27893 (ENHANCEMENT): Add possibility to change export path interactively
  • Issue #35791 (ENHANCEMENT): VBS profiler
  • Issue #36155 (ENHANCEMENT): Mark languages as not-visible for GUI selection
  • Issue #37347 (ENHANCEMENT): Dockings: Move title + icon + close-button into tab
  • Issue #38881 (PROBLEM): Negative volume in physical properties dialog
  • Issue #60573 (PROBLEM): Texts are translated to English, when text in German and target-language the same
  • Issue #62113 (ENHANCEMENT): optimize template engine parser
  • Issue #62815 (PROBLEM): Check start screen translations (CDstart)
  • Issue #63819 (PROBLEM): Deadlock on JVM shutdown
  • Issue #64273 (ENHANCEMENT): Switch to vc14 build per default
  • Issue #65197 (ENHANCEMENT): No right border visible in button groups when custom style is used
  • Issue #66965 (ENHANCEMENT): Extra key in partsol.cfg and geomsearch.cfg for number of triangles in 64 bits
  • Issue #68139 (ENHANCEMENT): CSTreeCtrl - Allow to deselect with click on empty area
  • Issue #68811 (PROBLEM): cscripthost.exe crash/minidump
  • Issue #72311 (PROBLEM): Crash when trying to connect to NULL QObject
  • Issue #72807 (ENHANCEMENT): Enable whole program optimization
  • Issue #73261 (ENHANCEMENT): debug.cfg (DEFAULT_USER) should be improved for better usability in PARTconfig Editor V2
  • Issue #73271 (ENHANCEMENT): din962_local.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #73297 (ENHANCEMENT): padmin.cfg (DEFAULT_USER) should be improved for better usability in PARTconfig Editor V2
  • Issue #73343 (PROBLEM): #:HELP; on other languages does not work with PARTconfig Editor v2
  • Issue #73777 (ENHANCEMENT): partsyn.cfg (CADENAS_DEFAULTUSER) should be improved for better usability in PARTconfig Editor V2
  • Issue #73795 (ENHANCEMENT): partupdate.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #73801 (ENHANCEMENT): pcdstart.cfg (CADENAS_DEFAULTUSER) should be improved for better usability in PARTconfig Editor V2
  • Issue #73917 (ENHANCEMENT): ps3Viewer.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #73969 (ENHANCEMENT): reports.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #73983 (ENHANCEMENT): statistic_tool.cfg (CADENAS_DEFAULTUSER) should be improved for better usability in PARTconfig Editor V2
  • Issue #73993 (ENHANCEMENT): varsearch.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #73995 (ENHANCEMENT): vbexception.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74059 (ENHANCEMENT): catalogprofiler.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74117 (ENHANCEMENT): din962_global.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74123 (ENHANCEMENT): docscan.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74127 (ENHANCEMENT): ecat_extension.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74129 (ENHANCEMENT): erpcustom.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74135 (ENHANCEMENT): erpcustom_plinkmanager.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74137 (ENHANCEMENT): exportdlls.cfg (CADENAS_SETUP) should be improved for better usability in PARTconfig Editor V2
  • Issue #74141 (ENHANCEMENT): filesystems.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74273 (ENHANCEMENT): Sort files in system information by name
  • Issue #74341 (ENHANCEMENT): ifparasolid.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74381 (ENHANCEMENT): ifprofile.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74413 (ENHANCEMENT): nightupdate.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74511 (ENHANCEMENT): Remove plinkupdatemgr.cfg
  • Issue #74513 (ENHANCEMENT): prefcatalogs.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74519 (ENHANCEMENT): pricesearchplugin.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74543 (ENHANCEMENT): statistic_tool.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74933 (ENHANCEMENT): "Only changed keys" setting does not working correctly
  • Issue #75875 (ENHANCEMENT): Quick & Simple should create the pictures in PNG and valid size
  • Issue #76825 (ENHANCEMENT): Create proxy of TableLineImageConfig for pcom
  • Issue #77851 (ENHANCEMENT): Try to create different style for slider
  • Issue #78191 (ENHANCEMENT): Enhance Assembly scanner for use with midents
  • Issue #78267 (ENHANCEMENT): Make RegisterAcadPlugin independent
  • Issue #79425 (ENHANCEMENT): Main Issue for Enhanced PCOM
  • Issue #79895 (PROBLEM): Help tooltip layout problems
  • Issue #82065 (PROBLEM): Program help (F1): When clicking on "Mehr anzeigen" at the end of result list an error occurs
  • Issue #82197 (PROBLEM): HELP system: Some links do not work

Component Design

  • Issue #80579 (ENHANCEMENT): Better selection of index trees
  • Issue #80629 (ENHANCEMENT): Rework welcome view

Component eCAT/OfflineCD

  • Issue #33177 (ENHANCEMENT): Allow additional copy paths for Offline CD installation
  • Issue #52501 (PROBLEM): copylinkdb.vbs does not work
  • Issue #59159 (ENHANCEMENT): Missing version for autocad 2016 export in the Offline CD
  • Issue #63101 (PROBLEM): Weird name box when creating offline CD
  • Issue #65101 (PROBLEM): Offline CD: Shortcut icon is not created properly after installation
  • Issue #65185 (PROBLEM): Offline CD: Load geometry (Native) - Creo Direct Modeling
  • Issue #68517 (ENHANCEMENT): Add registration wizard script to build and add to Offline CD master

Component eCAT/PARTcreator/HTML

  • Issue #62199 (ENHANCEMENT): Create sitemap file
  • Issue #83671 (ENHANCEMENT): HTMLbatch: Scale created compatibility catalog.bmp

Component eCAT/PARTdataManager/configurator

  • Issue #37335 (PROBLEM): Forbid detailed bearings to be inserted into assembly configurations
  • Issue #48119 (PROBLEM): PARTdataManager crashes when trying to overwrite template
  • Issue #61993 (ENHANCEMENT): Configurator mode in PARTdataManager
  • Issue #63165 (PROBLEM): PARTdataManager Configurator window disappears
  • Issue #64669 (ENHANCEMENT): Wrong design for the PDF button
  • Issue #66859 (PROBLEM): PARTdataManager issue with deleting subassemblies
  • Issue #72051 (PROBLEM): PARTdataManager crashes if you try to change rows from Configurator in table
  • Issue #82049 (PROBLEM): Dimension mode closes with each table recalc

Component eCAT/PARTdesigner

  • Issue #30137 (PROBLEM): Edit value in the table, of times not possible
  • Issue #58015 (ENHANCEMENT): PARTdesigner, "face class browser" tree selection has inaccurate selection trigger
  • Issue #58489 (ENHANCEMENT): Multi-select faces by face-attribute
  • Issue #59425 (ENHANCEMENT): PARTdesigner - add scale option for whole 3db
  • Issue #59731 (ENHANCEMENT): PARTdesigner - improve user interface in same way it is in PARTdataManager
  • Issue #60311 (ENHANCEMENT): If you press the middle MB+right MB then the middle button gets stuck
  • Issue #62251 (ENHANCEMENT): Enable per feature minimum accuracy setting by default
  • Issue #63879 (ENHANCEMENT): Please hide "Bauteil als Negativteil behandeln" Feature via CFG
  • Issue #64181 (ENHANCEMENT): Need UI in PARTdesigner for Draft/Fillet
  • Issue #66501 (ENHANCEMENT): UI in PARTdesigner for 2D-Drawing dialog dysfunction
  • Issue #69645 (PROBLEM): "Create sweep cut" does not work
  • Issue #71541 (ENHANCEMENT): Chamfer\Rounding feature not translated in English
  • Issue #71583 (PROBLEM): PARTdesigner crashes when deleting sketch
  • Issue #71603 (PROBLEM): Chamfer\Rounding - Elements handling
  • Issue #71609 (PROBLEM): Rounding created with chamfer/rounding tool not visually correct
  • Issue #71659 (PROBLEM): Order of base and cut feature is exchanged causing error in model
  • Issue #71683 (PROBLEM): Graphical glitch when adding chamfer/rounding on all 6 planes of the cube
  • Issue #71691 (PROBLEM): Color could not be added to chamfer/rounding surface
  • Issue #71723 (ENHANCEMENT): Distance 2 is not editable in chafer/rounding tool
  • Issue #71737 (PROBLEM): Two or more different blend features could not be used on single base feature
  • Issue #71747 (PROBLEM): Blend feature - When you switch from rounding to chamfer value is changed to 7.5
  • Issue #72213 (PROBLEM): Default value not displayed in table debugger
  • Issue #72281 (ENHANCEMENT): Blend should not have the same icon as sketch
  • Issue #72283 (ENHANCEMENT): If I edit Blend it would be nice that it is highlighted
  • Issue #74099 (PROBLEM): Remove neutral import from PARTdesigner (just hide menu, let the code persist if we need it later)
  • Issue #76221 (PROBLEM): PARTdesigner Dialog Connectionpointname limit characters
  • Issue #76225 (PROBLEM): PARTdesigner Dialog Connectionpointname limit characters
  • Issue #76353 (ENHANCEMENT): PARTdesigner: Crash on mouse hover
  • Issue #76359 (ENHANCEMENT): PARTdesigner: crashes when deleting features
  • Issue #76363 (ENHANCEMENT): PARTdesigner: the toolbar menu is popping up in 3d pane area
  • Issue #76505 (PROBLEM): PARTdesigner: Moving sketches not possible
  • Issue #76509 (ENHANCEMENT): PARTdesigner: Missing label for "Value" input field
  • Issue #76511 (ENHANCEMENT): PARTdesigner: "Description" in "Variable table" would be helpful
  • Issue #76523 (ENHANCEMENT): PARTdesigner: Delete step in sketcher only takes effect when moving the mouse into the sketcher
  • Issue #76565 (PROBLEM): Construction Edges are no valid selections for blends
  • Issue #76589 (PROBLEM): PARTdesigner: Sketch cannot be deleted
  • Issue #77773 (ENHANCEMENT): PARTdesigner: Enhance GUI of Variable manager
  • Issue #78151 (PROBLEM): Remove tool bodies from source
  • Issue #78233 (ENHANCEMENT): Enhance depiction for value ranges with defined step width
  • Issue #80293 (PROBLEM): Log window stays even if application is closed
  • Issue #80297 (ENHANCEMENT): Mouse Over variables whole line
  • Issue #80303 (ENHANCEMENT): Variable sorting in table
  • Issue #80307 (ENHANCEMENT): Handling variable input
  • Issue #81053 (ENHANCEMENT): Blend UI: Warning about edge being construction edge.
  • Issue #81059 (ENHANCEMENT): Blend UI: Patterns are not recognized when blend is applied.
  • Issue #83757 (PROBLEM): Sketcher, "Insert N-sided polygon" we can not follow visually steps when creating it
  • Issue #83767 (PROBLEM): Sketcher, Change parameters in drawing should be possible with double click
  • Issue #83815 (ENHANCEMENT): PARTdesigner, improve switching tabs
  • Issue #83955 (PROBLEM): PARTdesigner, Red/cyan effect doesn't work
  • Issue #83989 (PROBLEM): Fully visible transparency makes 3D model invisible and opposite
  • Issue #84037 (PROBLEM): Make possible editing properties of steps in 3D History
  • Issue #84167 (PROBLEM): "," in data input should bring syntax error
  • Issue #84193 (PROBLEM): Saving should not be possible on any QA state

Component eCAT/PARTeditor

  • Issue #2101 (ENHANCEMENT): add attribute algorithms and value ranges to variable manager
  • Issue #7054 (ENHANCEMENT): Windows "Wertebereich" and "Merkmalalgorithmus" opened at the same time
  • Issue #18803 (ENHANCEMENT): Use syntax colors in algorithm view
  • Issue #19045 (PROBLEM): Selecting multiple cells is nearly not visible
  • Issue #60533 (ENHANCEMENT): Remove neon http client
  • Issue #81915 (ENHANCEMENT): Please create Script for adding LOD Variables + Classification

Component eCAT/PARTproject

  • Issue #2611 (ENHANCEMENT): complete actualisation of all svn catalogues
  • Issue #5806 (ENHANCEMENT): Option "Shutdown PC when TestMeta is complete"
  • Issue #6856 (ENHANCEMENT): Sort dialog may be resizable!
  • Issue #7482 (ENHANCEMENT): filename suggestion for assemblies
  • Issue #25126 (ENHANCEMENT): confirmation dialog for deletion of project parts
  • Issue #57211 (ENHANCEMENT): Add progress information to catalog mapping generation
  • Issue #58293 (ENHANCEMENT): PARTproject, CSV creation dialog has TXT as default instead of CSV
  • Issue #62063 (ENHANCEMENT): Number of characters in variable
  • Issue #62083 (ENHANCEMENT): Remove old svn checkout dialog
  • Issue #63321 (ENHANCEMENT): Rewrite file list dialog in Qt
  • Issue #64745 (PROBLEM): ERP Mapping in PARTproject doesn't change state of higher levels if lower level is changed
  • Issue #64749 (ENHANCEMENT): ERP Mapping in PARTproject should show only lines which are not mapped
  • Issue #64775 (PROBLEM): Creation of standardization system hangs in endless loop
  • Issue #64825 (ENHANCEMENT): If "Verify all mappings" button is moved on somewhere on the top then those buttons could be grouped together
  • Issue #65079 (PROBLEM): Default translation of the folder is changed after import of Q&S project
  • Issue #65237 (ENHANCEMENT): Add catalog defined HTML pages to project
  • Issue #65361 (PROBLEM): PARTproject checkout window flickers after Norm checkout
  • Issue #65963 (PROBLEM): Show 3D preview in PARTproject does not work
  • Issue #66435 (ENHANCEMENT): Import CSV Translation list Translation ReleaseNotes
  • Issue #66571 (PROBLEM): Crash in PARTproject when selecting table
  • Issue #66659 (PROBLEM): Bug in QA check tab in PARTproject
  • Issue #66723 (ENHANCEMENT): Rename "License key" option in PARTinfo tool to "Company key"
  • Issue #67035 (PROBLEM): Incorrect automatic Classification Standards
  • Issue #67159 (ENHANCEMENT): Optimize table performance
  • Issue #68369 (ENHANCEMENT): Add tool tip for icons in the tree from edit erpmapping
  • Issue #68379 (ENHANCEMENT): ERP mapping: delayed update of icons
  • Issue #68807 (PROBLEM): Old classes in Standards classification
  • Issue #68949 (PROBLEM): Asserts in levenshtein implementation
  • Issue #69457 (ENHANCEMENT): Handle Class 2.0 Projects in PARTproject
  • Issue #69461 (ENHANCEMENT): Replace old table core with new table core in PARTproject
  • Issue #69507 (ENHANCEMENT): Deeplinks generator - Save path, wrong command
  • Issue #69649 (ENHANCEMENT): GUI to add images for table header
  • Issue #71415 (PROBLEM): Unhandled exception in edit mapping file
  • Issue #71613 (ENHANCEMENT): Delete confirmation dialog question is not translated in English
  • Issue #72411 (PROBLEM): Translation Dialog not shown
  • Issue #73217 (ENHANCEMENT): Add rotation axis keys to PARTproject
  • Issue #74621 (PROBLEM): History Analyzer to 64-bit and fix script
  • Issue #74711 (ENHANCEMENT): Change white background to transparent on PARTproject icon
  • Issue #75309 (ENHANCEMENT): Use app loader to open editor and designer in PARTproject
  • Issue #75555 (PROBLEM): Define image-table-connection box stays in Preview bmp
  • Issue #75675 (PROBLEM): PARTproject should not show https documents as files
  • Issue #75747 (ENHANCEMENT): Revoked assignment could not be confirmed all at once
  • Issue #75755 (ENHANCEMENT): Edit ERP mapping - close on Esc button
  • Issue #75815 (ENHANCEMENT): Status icon delay in Edit ERP mapping dialog
  • Issue #75983 (ENHANCEMENT): Generate preview images PNG in 8-bit
  • Issue #76105 (PROBLEM): 2h time difference between add and edit ERP mapping on beta SVN
  • Issue #76227 (PROBLEM): "Versionsverwaltung konfigurieren" is not working
  • Issue #77241 (ENHANCEMENT): Create catalog separation tool
  • Issue #77243 (ENHANCEMENT): Create UI for catalog separation tool
  • Issue #77435 (PROBLEM): HTML editor is broken
  • Issue #77477 (ENHANCEMENT): Port ERP mappings to new table and new table GUI
  • Issue #78389 (PROBLEM): media variables cache is to slow
  • Issue #79065 (ENHANCEMENT): Publishing should check multiple mapping releases
  • Issue #79163 (ENHANCEMENT): Filterable link projects
  • Issue #79263 (ENHANCEMENT): PARTproject classification / publication of connection points
  • Issue #79279 (PROBLEM): DWG importer missing layer
  • Issue #79699 (ENHANCEMENT): Additional features for converting DXF to PRA with Import tool in PARTproject
  • Issue #79739 (ENHANCEMENT): Create Dialog to convert image files
  • Issue #79835 (ENHANCEMENT): New link dialog title not translated
  • Issue #80541 (ENHANCEMENT): Add a option to enable/disable black borders when exporting PNG
  • Issue #80933 (ENHANCEMENT): CatalogSeparator copy all data from links
  • Issue #80935 (PROBLEM): Asim generation crash
  • Issue #81145 (ENHANCEMENT): PARTproject - classification dialog: Search function
  • Issue #81283 (ENHANCEMENT): ERP Mapping changes on Values
  • Issue #81731 (ENHANCEMENT): Check if publishing script works both in V10 and V11
  • Issue #81767 (ENHANCEMENT): Mark lines were EOL info is added with JSON
  • Issue #81801 (ENHANCEMENT): Classification GUI: Name of Values required
  • Issue #82137 (PROBLEM): Wrong order of eClasses in dropdown menu
  • Issue #82351 (PROBLEM): Checking syntax in Formula Editor (Edit ERP Mapping Dialog) not working
  • Issue #82391 (ENHANCEMENT): Deleting values from media variables doesn't work
  • Issue #82659 (ENHANCEMENT): Each cfg seems to open up a new browser, better use one
  • Issue #83199 (PROBLEM): Better syntax error messages in XML parser
  • Issue #84235 (ENHANCEMENT): Allow to add classification help files to classification cip
  • Issue #84237 (ENHANCEMENT): Remap lines after changing rules
  • Issue #84367 (PROBLEM): Native parts don't show preview in PARTproject after batch export
  • Issue #84371 (ENHANCEMENT): Clear icon cache in PARTproject after hitting F5

Component eCAT/PARTproject/QuickandSimple

  • Issue #68373 (PROBLEM): Batch import (Q&S) should skip projects with errors
  • Issue #76821 (ENHANCEMENT): Update funcionality in Q&S
  • Issue #78265 (ENHANCEMENT): Q&S Importer --> Adjustment of Format Specification
  • Issue #80141 (PROBLEM): Q&S: Move "BadQuality" flag from the project to the actual part
  • Issue #80149 (PROBLEM): Move "BadQuality" flag from the project to the actual part and provide extra handler
  • Issue #80829 (PROBLEM): Q&S data type definition through CSV does not work
  • Issue #82737 (ENHANCEMENT): RFA Q&S: Do not save SAT files as additional files in the final catalog, only use them to create STEP inside 3DB

Component eCAT/PARTqaChecker

  • Issue #8451 (ENHANCEMENT): surface with thread may not split due additional feature operation
  • Issue #54713 (PROBLEM): In two projects same NB, TestMeta pass without error
  • Issue #56211 (ENHANCEMENT): Improve testmeta message when nominal diameter is the same as solid body
  • Issue #64539 (ENHANCEMENT): Testmeta should report error for projects which have thread created in solid body
  • Issue #64619 (PROBLEM): Testmeta improve error reporting for invalid thread definition
  • Issue #68849 (PROBLEM): Q&S testmeta stuck
  • Issue #72229 (ENHANCEMENT): TESTMETA Upgrade Preview Pictures to 400x400px if 8-Bit
  • Issue #73563 (ENHANCEMENT): Empty bearing parts should be reported in testmeta

Component eCAT/PARTstatistic

  • Issue #81295 (ENHANCEMENT): Add info to PARTstatistic Installer and Help -> Compatible only with <= Windows 8

Component LinkDB/PARTclassImporter

  • Issue #41311 (PROBLEM): Performance Issue: Class importer copies all directory preview during an update run
  • Issue #68565 (ENHANCEMENT): ClassImport / Plmsynchro: STL_Reduced don't import if Triangles > x
  • Issue #75801 (ENHANCEMENT): Log more information in case of invalid class name
  • Issue #75847 (ENHANCEMENT): Improve locking for class importer / geo index generation
  • Issue #76193 (ENHANCEMENT): Make redirection from PMessage to class importer log file thread-global
  • Issue #77025 (PROBLEM): Import to prj table does not work if attribute names contain "-"
  • Issue #78999 (ENHANCEMENT): Make threshold for incremental updates configurable
  • Issue #80507 (ENHANCEMENT): Support for removing or hiding empty classes
  • Issue #80821 (ENHANCEMENT): Classimporter does not create timestamp if ERPNOFIELD is not in Database (but does not stop SQL Inserts)
  • Issue #83009 (ENHANCEMENT): Improve performance for updating lucene index in class importer
  • Issue #83017 (ENHANCEMENT): Class importer performance improvements
  • Issue #83387 (ENHANCEMENT): Add functionality to check and repair link index to class importer
  • Issue #83579 (PROBLEM): Problem when using COLUMN_SORT in PRJTABLE for Classimporter

Component LinkDB/PARTdataManager

  • Issue #51677 (PROBLEM): Error in erpcustom.vbb during native checkin
  • Issue #66039 (PROBLEM): Document list dialog does not work if another name is configured for PLMTABLE2
  • Issue #68237 (PROBLEM): Create variant preview does not work
  • Issue #68239 (PROBLEM): Adding a variant may be refused
  • Issue #68945 (ENHANCEMENT): Port show_dbdata.vbs to V11
  • Issue #72617 (ENHANCEMENT): Port PLM document list dialog to new table core
  • Issue #73417 (PROBLEM): Check index coloring behaviour in PARTdataManager
  • Issue #73471 (PROBLEM): VARSUSED does not use VARNAME_MAPPING options
  • Issue #73751 (PROBLEM): PARTdataManager crashes when opening bearing project
  • Issue #73791 (PROBLEM): add LOCKTABLE in plinkcommon.cfg
  • Issue #75513 (PROBLEM): Creating PLM records in document list dialog fails
  • Issue #75651 (PROBLEM): ERP toolbar - Edit/delete dataset enters strange numbers
  • Issue #75663 (ENHANCEMENT): ERP nr_generator gives error message when it reached max value
  • Issue #75939 (PROBLEM): Fix table column widths in bitmap column value ranges
  • Issue #77955 (PROBLEM): PARTdataManager stop working V11
  • Issue #79015 (PROBLEM): Topology search tab only selectable when clicking on the icon
  • Issue #79145 (PROBLEM): Parse error in custom LINA (linkdb)
  • Issue #80125 (PROBLEM): Maxtrixview sometimes shows content of wrong folder
  • Issue #80427 (PROBLEM): Sql error when trying to assign an ERP number to a line which already has an ERP number
  • Issue #80469 (PROBLEM): Creating LinkDB entry with variant faulty
  • Issue #83453 (PROBLEM): PARTdataManager - If AsmCfg was loaded as first project, no 3D View was shown

Component LinkDB/PARTlinkManager

  • Issue #19925 (ENHANCEMENT): Backup-tool
  • Issue #47255 (PROBLEM): Click on PLM_DOCVIEW column sets a filter instead of opening the document list in update manager
  • Issue #51267 (ENHANCEMENT): Add extra step - "Are you sure" before deleting "additional Table Data" PARTlinkManager
  • Issue #59139 (PROBLEM): Hide old versions of parts also hides unassigned ERP numbers
  • Issue #59537 (ENHANCEMENT): PARTlinkManager, confusing "add row" functionality
  • Issue #64279 (ENHANCEMENT): Show progress dialog while updating tree table after CSV import
  • Issue #65179 (ENHANCEMENT): PARTlinkManager - update manager layout issue, end of slider cut off
  • Issue #65555 (ENHANCEMENT): PARTlinkManager - Modify of database columns not available
  • Issue #67561 (ENHANCEMENT): PARTlinkManager - importing CSV small translation error
  • Issue #67563 (PROBLEM): ERP toolbar - LinkDbBackToMgr and LinkDbCancelBackToMgr unusable
  • Issue #68735 (ENHANCEMENT): PARTlinkManager UI save DB
  • Issue #72197 (PROBLEM): Oracle12 PARTlinkManager Error on adding Column type NCHAR
  • Issue #73613 (ENHANCEMENT): Update manager should have maximize button
  • Issue #80685 (PROBLEM): Update manager is broken in V11

Component PSol/PARTadmin

  • Issue #36161 (ENHANCEMENT): PARTadmin should read PsolLangListC to show language-list
  • Issue #48355 (ENHANCEMENT): Rework config editor in PARTadmin (Documentation, Layout, Usability)
  • Issue #53141 (PROBLEM): Keyboard navigation does not work in config editor tree
  • Issue #57793 (ENHANCEMENT): PARTadmin - add checkboxes to menuvisibility
  • Issue #57795 (ENHANCEMENT): PARTadmin - add alphabetically sorting to menustructure
  • Issue #58551 (PROBLEM): PARTadmin does not store cfg file when using the Save dialog on close
  • Issue #58835 (ENHANCEMENT): Index administration: "cancel all" makes all commands available
  • Issue #60423 (ENHANCEMENT): Search function for the config-files in PARTadmin
  • Issue #60425 (ENHANCEMENT): possibility to enlarge the category tree in PARTadmin
  • Issue #61375 (ENHANCEMENT): PARTadmin Catalog Update should check cad changes for PDM update
  • Issue #64655 (PROBLEM): PARTadmin creation of mssql user does not work
  • Issue #68411 (ENHANCEMENT): PARTupdate XML Information categories catalog info.
  • Issue #71183 (PROBLEM): PARTadmin write access with sitesetup
  • Issue #71657 (PROBLEM): Information window that displays config files: blocks and keys could not be resized
  • Issue #73267 (PROBLEM): Graphical glitch stays on the screen when using drop-down menu in PARTconfig Editor v2
  • Issue #73295 (ENHANCEMENT): PARTadmin window layout not adjustable
  • Issue #73605 (PROBLEM): PARTadmin - color yellow for "overwrite always" not good
  • Issue #73829 (PROBLEM): PARTconfig Editor v2 does not work with value range declaration
  • Issue #74005 (ENHANCEMENT): Remove empty lines in CFGs automatically
  • Issue #74355 (ENHANCEMENT): PARTconfigEditor V2 - move context menu from category in tree view
  • Issue #74427 (ENHANCEMENT): Catalog update: Remove item "Migration"
  • Issue #74843 (ENHANCEMENT): Padlock icon in Configuration files have white dot
  • Issue #74853 (ENHANCEMENT): Open windows explorer will not select cfg file in Windows Explorer
  • Issue #74943 (ENHANCEMENT): Add "default" catalog language
  • Issue #74947 (ENHANCEMENT): Activating SITESETUP but without manually creating SITESETUP folder
  • Issue #75019 (ENHANCEMENT): PARTconfig Editor V2; scrollbar problem
  • Issue #75073 (PROBLEM): Sometimes PARTadmin crashes when saving changes
  • Issue #75091 (PROBLEM): Config Editor: Sometimes "Documentation" field is missing
  • Issue #75219 (ENHANCEMENT): Shortcut to activate a line in PARTadmin doesn't work correctly
  • Issue #75365 (ENHANCEMENT): ConfigEditor V2: Remove mouse over coloring
  • Issue #75371 (ENHANCEMENT): ConfigEditor V2: Check latency after mouse click on key
  • Issue #75373 (ENHANCEMENT): ConfigEditor V2: The inner frame of the short documentation is not growing correctly
  • Issue #75375 (ENHANCEMENT): ConfigEditor V2: Save the setting of the "short information" height the user did set and use it as max-height
  • Issue #75377 (ENHANCEMENT): ConfigEditor V2: Hide short documentation / documentation dependant on what documentation exists
  • Issue #75379 (ENHANCEMENT): ConfigEditor V2: Combobox has strange behaviour when using with keyboard
  • Issue #76321 (ENHANCEMENT): Check VBS syntax in ConfigEditor
  • Issue #77353 (ENHANCEMENT): CADregistration in PARTadmin
  • Issue #78599 (ENHANCEMENT): Check if default is needed in config comments
  • Issue #78933 (ENHANCEMENT): Add PARTwarehouse configs to config editor
  • Issue #79397 (PROBLEM): Crash when clicking on values right of a config name
  • Issue #79491 (PROBLEM): Update manager link in offline catalog does not work
  • Issue #79633 (ENHANCEMENT): Add create patch / apply patch functions to config editor
  • Issue #81777 (PROBLEM): PARTadmin - configs: "Documentation" dialog area is displayed but empty
  • Issue #82807 (PROBLEM): Deregister of interface sometimes not working
  • Issue #82983 (PROBLEM): Config 2.0 Editor crash when adding a key
  • Issue #84251 (PROBLEM): Documentation layout jumbled for cfg files in PARTadmin
  • Issue #84339 (PROBLEM): Application crashes on exit

Component PSol/PARTadmin/GeoImport

  • Issue #35085 (PROBLEM): Import status of a part is overwritten in some cases
  • Issue #44361 (ENHANCEMENT): Improve error message during import
  • Issue #53865 (ENHANCEMENT): Geoimport some Solid Edge files could not be imported if there are many files for import
  • Issue #57695 (ENHANCEMENT): Change button text "Cancel all" to "Cancel all pending"
  • Issue #60967 (PROBLEM): Geoimport does not work with Creo Elements Direct Modeling
  • Issue #64521 (ENHANCEMENT): Geoimport - translation missing in message queue in PARTadmin
  • Issue #68119 (PROBLEM): 3D not imported when running Creo Elements Direct Modeling Geoimport
  • Issue #68343 (ENHANCEMENT): Hide Geoimporter in PARTadmin as soon as alternative in PARTdataCenter is available
  • Issue #71323 (PROBLEM): Test PARTadmin Batch Import
  • Issue #74327 (ENHANCEMENT): Use translator pool in conversion service

Component PSol/PARTadmin/Index

  • Issue #34989 (PROBLEM): Information Dialog when creating full-text index for big catalogs should be adjusted for usability
  • Issue #48595 (ENHANCEMENT): PARTadmin / Index - display for subfolder
  • Issue #50349 (ENHANCEMENT): PARTadmin index generation: Harmonize GUI terms
  • Issue #60037 (ENHANCEMENT): PARTadmin, partition map generation window layout issue
  • Issue #61833 (PROBLEM): SQL errors when uninstalling catalogs with many ERP numbers
  • Issue #63709 (ENHANCEMENT): Prohibit user interaction during index reload
  • Issue #65195 (PROBLEM): When uninstalling catalog PARTadmin asks if you want to remove it from database even you don't have ERP on environment
  • Issue #66341 (PROBLEM): Index progress widget not shown
  • Issue #66541 (ENHANCEMENT): Partition map window layout enhancement
  • Issue #71779 (ENHANCEMENT): No update for ERP index in Psol v11
  • Issue #73463 (PROBLEM): Missing error message when erp index could not be created
  • Issue #75237 (PROBLEM): Update geoindex has errors on PLMsyncho catalog
  • Issue #82661 (ENHANCEMENT): How to know if partial search indexing is done
  • Issue #83585 (PROBLEM): class2tree.csv is not updates before creating cip in PARTadmin

Component PSol/PARTadmin/OfflineUpdate

  • Issue #795 (ENHANCEMENT): Show changes when updating a catalog
  • Issue #17775 (ENHANCEMENT): PARTdataManager new language Romanian preferable
  • Issue #45919 (PROBLEM): Do not switch tab pages while CIP installation is running
  • Issue #53451 (ENHANCEMENT): PARTadmin: save results of cip-check
  • Issue #62329 (ENHANCEMENT): PARTadmin Offline update - add folder with multiple cip files with drag&drop
  • Issue #71847 (ENHANCEMENT): Show 3D compare window after simulation of erp update
  • Issue #76031 (PROBLEM): Offline Update: Some error messages are not displayed anymore.

Component PSol/PARTadmin/OnlineUpdate

  • Issue #66021 (ENHANCEMENT): CATLIST XML Generation PARTupdate with V10 not possible
  • Issue #66627 (PROBLEM): Catalog download via PARTupdate not possible
  • Issue #66967 (ENHANCEMENT): Weird message after catalog failed to download in the online update from PARTadmin
  • Issue #67171 (ENHANCEMENT): suppress all messages by catalog update on PARTadmin
  • Issue #67263 (ENHANCEMENT): PARTupdate XML Generation move PSOL Version from CIP Files bigger 4GB to V11.0
  • Issue #67483 (PROBLEM): Online catalog update does not work
  • Issue #68267 (PROBLEM): Wrong English translation in catalog update
  • Issue #68393 (ENHANCEMENT): Display language code instead of country code in catalog list
  • Issue #69483 (PROBLEM): STRG+Mouse wheel for zoom list no longer works in catalog update list
  • Issue #71255 (ENHANCEMENT): Usability - PARTupdate - Sort the retired catalog list
  • Issue #71577 (PROBLEM): Online catalog update does not work in v11
  • Issue #71939 (ENHANCEMENT): Enhance ERP check status window
  • Issue #73561 (ENHANCEMENT): PARTadmin: Manage catalog online update failure better when disk is full
  • Issue #74265 (ENHANCEMENT): Do not show old ConfigEditor in MMCTree of PARTadmin V11
  • Issue #76901 (PROBLEM): Online catalog installation: Authentication fails
  • Issue #77213 (ENHANCEMENT): Better visibility of release notes
  • Issue #78355 (ENHANCEMENT): Release notes layout -> Expand height
  • Issue #78671 (PROBLEM): Catalog sizes incorrect in online update in PSOL11
  • Issue #79309 (PROBLEM): I have to toggle the setting "Show information about already installed versions" once that it is working
  • Issue #80441 (PROBLEM): Downloaded CIP flagged as corrupt after the CIP on our server was updated
  • Issue #80923 (ENHANCEMENT): Add new Category Classification 2.0 to online update

Component PSol/PARTapplicationServer

  • Issue #57917 (PROBLEM): PARTcloud: Some STEP parts crush PAppServer's STEP import functionality completely
  • Issue #58425 (PROBLEM): Key multi selection in config editor
  • Issue #62203 (PROBLEM): geomsearch service has_more always false
  • Issue #73335 (ENHANCEMENT): PARTcloud: Limit number of tries of index update
  • Issue #75535 (ENHANCEMENT): AppServer: Update ErpSearchIndex per catalog
  • Issue #76029 (ENHANCEMENT): PAppServer DidYouMean (DYM) service
  • Issue #76057 (ENHANCEMENT): PAppServer SimilarWords (SWS) service
  • Issue #76445 (PROBLEM): Pappserver crash
  • Issue #76913 (PROBLEM): PAppServer exports wrong model with MIDENT /service/export
  • Issue #77247 (ENHANCEMENT): Service to create FilterAssistant

Component PSol/PARTdataManager

  • Issue #22903 (PROBLEM): Request new erp number for part the request window gets all time in main monitor open
  • Issue #31403 (ENHANCEMENT): Minor UI problems in PARTdataManager (breadcrumbs, tree view)
  • Issue #34099 (ENHANCEMENT): Missing button to open the use case area
  • Issue #34363 (PROBLEM): Project selection window state is not saved/restored, if it is disabled at startup
  • Issue #34465 (PROBLEM): Multi selection broken after adding multiple parts to favorites
  • Issue #36835 (ENHANCEMENT): Add toolbar to compare window
  • Issue #38653 (PROBLEM): startup page flickers in 9.07
  • Issue #42331 (PROBLEM): Property tooltips do not work in geo search columns
  • Issue #43799 (ENHANCEMENT): Move table view to Qt
  • Issue #49539 (ENHANCEMENT): Remove accuracy settings and set to default = MEDIUM (only keep for rendering to export HIGH)
  • Issue #50257 (ENHANCEMENT): Low image quality in geometry search
  • Issue #52333 (ENHANCEMENT): Search in table
  • Issue #52337 (ENHANCEMENT): Show side- and topo-variables in table
  • Issue #52341 (ENHANCEMENT): New filter GUI for table
  • Issue #54709 (ENHANCEMENT): Part Comparison : Description field to small
  • Issue #55971 (ENHANCEMENT): Automatic Dimension Panel: It should be possible to decide dims for 2D and 3D
  • Issue #55973 (ENHANCEMENT): Customer Demands to the Automatic Dimension Panel
  • Issue #57289 (PROBLEM): INCH/mm problems in part compare and geo search
  • Issue #58363 (ENHANCEMENT): Add dock position indicators to new docking GUI
  • Issue #58371 (ENHANCEMENT): PARTdataManager, dockings are too narrow when opened for the first time
  • Issue #58457 (ENHANCEMENT): Disable geometry import for AutoCad
  • Issue #58801 (ENHANCEMENT): PARTdataManager, right click context menu to show dockings has inconsistent activation
  • Issue #58803 (ENHANCEMENT): PARTdataManager, snap does not work at the edge of the window
  • Issue #58827 (PROBLEM): Multi selection does not work in PARTdataManager
  • Issue #58881 (ENHANCEMENT): Unclear naming of context menu entries (Table) after closing windows in PARTdataManager
  • Issue #58951 (PROBLEM): last position of Widget "Vorschläge" not resorted after PSOL start
  • Issue #59183 (PROBLEM): Dockings are collapsing for a second when switching to a new part type
  • Issue #59185 (PROBLEM): Docking layout of compare tab is not saved
  • Issue #59665 (PROBLEM): Custom dimensions - angle not exported right to AutoCAD
  • Issue #59685 (PROBLEM): Custom dimensions - Outer diameter is in ACAD inside the part instead outside like in the 2d derivation
  • Issue #59853 (ENHANCEMENT): The option to open closed tabs in PARTdataManager is confusing it could be reworked
  • Issue #61203 (PROBLEM): Open command does not work for folders
  • Issue #61405 (ENHANCEMENT): Load links only if visible
  • Issue #61469 (ENHANCEMENT): Rework PARTdataManager Options Dialog in Qt
  • Issue #61515 (ENHANCEMENT): New search type: Classification 2.0 search
  • Issue #61547 (ENHANCEMENT): Put icons and text with search information on the search tabs
  • Issue #61951 (ENHANCEMENT): Show filter assistants dynamically from search vars
  • Issue #62233 (ENHANCEMENT): Regard styles and state of the item in graphics layout engine (matrix view, pdatacenter)
  • Issue #62269 (ENHANCEMENT): Better Qt-based BreadCrumbsControl
  • Issue #62371 (PROBLEM): Title for dockings are visible twice until you click in the docking
  • Issue #62719 (ENHANCEMENT): Add mouse double-click option as back in PARTdataManager
  • Issue #62821 (ENHANCEMENT): Display structure
  • Issue #62997 (PROBLEM): React to show details view settings changes
  • Issue #63427 (ENHANCEMENT): Part Information and eClass
  • Issue #63631 (ENHANCEMENT): PARTdataManager - Report exported to PDF has random page breaks
  • Issue #63961 (ENHANCEMENT): Improve search visualization of filter assistants
  • Issue #63977 (PROBLEM): When searching without app server, the gui may be blocked
  • Issue #64025 (PROBLEM): Search result gui extremely slow with many search results
  • Issue #64033 (ENHANCEMENT): Make the default search-path of search-tabs configurable
  • Issue #64099 (ENHANCEMENT): Did-You-Mean windows stays the same while geosearching
  • Issue #64291 (ENHANCEMENT): In geometric search, "3D files" tab should be visible first
  • Issue #64361 (ENHANCEMENT): Rename "Search for unmachined parts" and subtrees
  • Issue #64489 (ENHANCEMENT): If possible let the scrollbar of part information stay while table line changed
  • Issue #64569 (ENHANCEMENT): 3D Dimensions: Add option to select connection points from context menu in 3D Pane
  • Issue #64983 (ENHANCEMENT): Removing a search result filter does not work
  • Issue #64987 (PROBLEM): When you click New search from Suggestions docking the search is still combined with existing other search types
  • Issue #65147 (ENHANCEMENT): Folder preview tooltip
  • Issue #65187 (ENHANCEMENT): PARTdataManager - minimize and restore changes selection in Structure
  • Issue #65217 (PROBLEM): Document scan - when native checkin is not used, huge BMP is created for imported model
  • Issue #65219 (PROBLEM): Some topology values are missing in CSV export
  • Issue #65235 (ENHANCEMENT): Add catalog defined HTML pages to project
  • Issue #65245 (ENHANCEMENT): Add 2D derivation to docking
  • Issue #65251 (ENHANCEMENT): Show value change dialogs only as caption-less, small dialogs
  • Issue #65253 (ENHANCEMENT): Sorting table columns
  • Issue #65255 (ENHANCEMENT): Add lines with drag&drop to the compare view
  • Issue #65257 (ENHANCEMENT): Add line to favorites, including selected value range fields
  • Issue #65263 (ENHANCEMENT): Show previews per line in table
  • Issue #65349 (PROBLEM): Windows flickering and unusable when recovering standard after closing all windows in Part view
  • Issue #65391 (ENHANCEMENT): Classification 2.0: Search UI integration and basic User Interface
  • Issue #65393 (ENHANCEMENT): Classification 2.0: XML Definition
  • Issue #65395 (ENHANCEMENT): Classification 2.0: Catalog structure
  • Issue #65397 (ENHANCEMENT): Classification 2.0: Adapt filter assistants to Classification 2.0 search
  • Issue #65401 (ENHANCEMENT): Classification 2.0: Show possible Classification 2.0 searches in Auto complete of full-text search
  • Issue #65425 (ENHANCEMENT): Add script for price search to sales offline only
  • Issue #65427 (ENHANCEMENT): Show technical preview in search results tooltip and index browsing tooltip
  • Issue #65435 (ENHANCEMENT): UGNX docscan export dialog too narrow
  • Issue #65469 (ENHANCEMENT): Show topology information window as dock in single part view
  • Issue #65479 (ENHANCEMENT): Adjust style of compare table to rest of software (lighter, icons, ...)
  • Issue #65493 (ENHANCEMENT): Quick compare of size in search results
  • Issue #65499 (ENHANCEMENT): Add technical previews to compare view
  • Issue #65579 (PROBLEM): 3d custom dimensions
  • Issue #65687 (PROBLEM): Drag&Drop in Favorites makes duplicates
  • Issue #65779 (ENHANCEMENT): Rework compare with search part
  • Issue #65931 (ENHANCEMENT): PARTdataManager: Enable Custom Dimensions in 3D Bearing projects
  • Issue #66045 (ENHANCEMENT): Create value range editors for classification search
  • Issue #66047 (ENHANCEMENT): Create 3D preview for classification search dialog
  • Issue #66067 (ENHANCEMENT): Show user in docking title that there are no technical previews available
  • Issue #66071 (ENHANCEMENT): 3D Tooltip: Set default size to large and rotate around Z only
  • Issue #66091 (PROBLEM): PARTdataManager not maximized when called from CAD
  • Issue #66127 (ENHANCEMENT): Configurable docking windows with HTML (also scriptable)
  • Issue #66137 (ENHANCEMENT): PARTdataManager: Tabular compare in part comparison doesn't look graphically correct
  • Issue #66155 (PROBLEM): PARTdataManager: Part comparison 3d view graphic glitch
  • Issue #66191 (PROBLEM): right click causes error within empty table
  • Issue #66801 (PROBLEM): Switching to an empty search results tab clears the search parameters
  • Issue #66971 (PROBLEM): Favorites available in structure even you don't have license
  • Issue #67077 (ENHANCEMENT): Part comparison topology description - weird coloring behavior
  • Issue #67129 (PROBLEM): Geo search results not displayed correctly in favorites
  • Issue #67497 (ENHANCEMENT): Tiny translation error in part compare load geometry
  • Issue #67515 (ENHANCEMENT): Small help tooltips for topology search
  • Issue #67533 (ENHANCEMENT): When changing number of search results, PARTdataManager needs to be restarted
  • Issue #68003 (PROBLEM): 3d custom dimensions issue
  • Issue #68075 (PROBLEM): Possible crash when terminating PARTdataManager after attaching an event handler to ViewSearch
  • Issue #68123 (PROBLEM): menuvisibility set some export formats to false not removing items on startup
  • Issue #68253 (ENHANCEMENT): Split category and content in PARTdataManager
  • Issue #68407 (PROBLEM): Crash when changing the stylesheet when a part is opened
  • Issue #68443 (PROBLEM): Icon for bearing projects is same as it is for single part
  • Issue #68537 (PROBLEM): After pressing first steps button part view tab gets weird in Partdatamanager
  • Issue #68581 (PROBLEM): Edit FilterAssistant not working, shows no variables and only empty texts
  • Issue #68675 (PROBLEM): Crash when trying to load an assembly with defect part
  • Issue #68677 (ENHANCEMENT): Show multiple classifications in table
  • Issue #68747 (ENHANCEMENT): Generate previews, "Frei definiert" is not translated to English
  • Issue #68877 (PROBLEM): Possible HTML tags when clicking on the name of a highlighted variable in the search results
  • Issue #68881 (ENHANCEMENT): Class 2.0 dialog: Change selection and tab behaviour
  • Issue #68931 (ENHANCEMENT): Show filter assistants dynamically from search vars directly in the current search vars window
  • Issue #68933 (PROBLEM): Path selection for search is not loaded correctly after restart of PARTdataManager
  • Issue #68991 (ENHANCEMENT): Integrate topo search param widgets into classification search dialog
  • Issue #71321 (PROBLEM): Test Document Scan
  • Issue #71473 (ENHANCEMENT): Tabs are invisible while moving them
  • Issue #71487 (ENHANCEMENT): Search for unmachined parts tab is too big
  • Issue #71505 (PROBLEM): PARTdataManager crashes when I try to open 2d projects
  • Issue #71599 (ENHANCEMENT): Proxy for classification search
  • Issue #71601 (ENHANCEMENT): Saving custom dimension
  • Issue #71669 (ENHANCEMENT): Add "Start search in new tab" to drop down menu of "start-search"-button
  • Issue #71675 (ENHANCEMENT): The icon and name of search for unmachined parts are wrong when no results
  • Issue #71687 (ENHANCEMENT): Full text search and variable search have the same icon
  • Issue #71689 (ENHANCEMENT): There should be icons for combination search
  • Issue #71765 (PROBLEM): Internal Error on Edit Table
  • Issue #71919 (ENHANCEMENT): create *.vbb with build and not copy with svn
  • Issue #72043 (ENHANCEMENT): Add unit change to topology search
  • Issue #72101 (ENHANCEMENT): Comparison icons should be moved one pixel up
  • Issue #72135 (ENHANCEMENT): Add part comparison to context menu of part view/3D view
  • Issue #72149 (ENHANCEMENT): Part comparison - master button should be active when you load parts for comparison
  • Issue #72291 (ENHANCEMENT): Filter in column header of table: Syntax
  • Issue #72323 (PROBLEM): Sometimes search gets not results where it should, maybe old searches are still cached
  • Issue #72567 (ENHANCEMENT): Links -> Similar Parts - Show lines instead of projects
  • Issue #72579 (PROBLEM): Feature selection in part compare is broken after line change
  • Issue #72787 (PROBLEM): Close open mident dialog when file opened
  • Issue #72793 (PROBLEM): Preview generation is not thread safe anymore
  • Issue #72919 (ENHANCEMENT): Crash when finishing erp index update and index is not open
  • Issue #73033 (PROBLEM): Dock cannot be resized if titles of tabs take too much space
  • Issue #73087 (PROBLEM): technical drawing is mirror-inverted after printing
  • Issue #73177 (PROBLEM): PART compare , Inner cylinders detection in bearing part compare
  • Issue #73229 (PROBLEM): PART Compare , detecting differently boreholes and inner cylinders comparing 2 T-piece parts
  • Issue #73299 (PROBLEM): wordfreq.xml should not be loaded on AppServerClient
  • Issue #73311 (PROBLEM): PARTdataManager - help information and load search buttons not working
  • Issue #73395 (PROBLEM): Save filter assistant returns a result too large error
  • Issue #73419 (ENHANCEMENT): PDF datasheet button should be inactive when you don't have project opened
  • Issue #73549 (ENHANCEMENT): Add Embeded/Virtual Flag to native checkin data
  • Issue #73559 (ENHANCEMENT): Dockings: Use different drop indicator images
  • Issue #73763 (PROBLEM): QA State icon tooltips do not work
  • Issue #73817 (PROBLEM): PARTdataManager crashes when selecting 2D dimensioning in Part comparison without any geometry loaded
  • Issue #73893 (PROBLEM): " Recover standard " feature in PARTdataManager v11.00 doesn't work
  • Issue #73933 (PROBLEM): Forbid to change project order in PARTcompare
  • Issue #74097 (PROBLEM): Ignore links in duplicate analysis
  • Issue #74249 (ENHANCEMENT): When selecting 2 parts, show context menu entry to load both parts into 3d directly
  • Issue #74279 (ENHANCEMENT): Quick Compare maybe add checkbox in header to compare all or allow multi selection
  • Issue #74297 (PROBLEM): Topology search: Adjust path for tooltip
  • Issue #74437 (PROBLEM): Variables missing in part compare, if a variable is hidden in one of the loaded tables
  • Issue #74467 (PROBLEM): When opening an stl in PARTdataManager from CompareTab, the unit base is ignored
  • Issue #74589 (PROBLEM): Topology search; Blind holes (without conus end) pattern not recognized
  • Issue #74629 (ENHANCEMENT): Insert Variable Name and Description in CustomDimension selection V11
  • Issue #74643 (ENHANCEMENT): Frame on folder tool-tip should have same width on all sides
  • Issue #74653 (PROBLEM): When changing folder via tool-tip folder in tree view is not updated
  • Issue #74663 (ENHANCEMENT): Cannot find fractional value despite the value existing in the catalog (Datatype Number)
  • Issue #74665 (PROBLEM): To much open file handles on server
  • Issue #74669 (ENHANCEMENT): Cursor should be changed when you hover something in folder tool-tip
  • Issue #74677 (PROBLEM): Check value range in new table
  • Issue #74689 (PROBLEM): 2D projects could not be opened in v11
  • Issue #74697 (PROBLEM): Crash when trying to replace part opening it via tool-tip but cancel it
  • Issue #74751 (ENHANCEMENT): Show project ERP state in directory tooltip
  • Issue #74759 (PROBLEM): Part Comparison , oppose components tab not working correctly for some projects
  • Issue #74761 (PROBLEM): Part Comparison , Degree of similarity icons are without colours
  • Issue #74777 (ENHANCEMENT): Technical view for part comparison; Replace positions of technical view and 3D view boxes
  • Issue #74781 (ENHANCEMENT): Technical view for PART compassion ; insert separation lines
  • Issue #74785 (ENHANCEMENT): Technical view for PART compassion ; remove or replace inscription in technical view window
  • Issue #74787 (ENHANCEMENT): Delay closing folder and project tool-tips
  • Issue #74795 (ENHANCEMENT): Geometric search ; improvement of main window
  • Issue #74801 (PROBLEM): Sometimes 2D preview is not displayed in tooltip
  • Issue #74803 (ENHANCEMENT): Project tool-tip should have minimum size
  • Issue #74809 (PROBLEM): Tooltip closed when changing 2D preview one some projects
  • Issue #74819 (PROBLEM): Quick compare doesn't work with native files in 3D tooltip
  • Issue #74959 (PROBLEM): Switching technical view does not always work in part compare
  • Issue #74985 (PROBLEM): index navigation breadcrumbs forward/backward buttons require multiple clicks
  • Issue #74993 (ENHANCEMENT): partsol.cfg: AS_TAB windows buggy
  • Issue #75009 (ENHANCEMENT): Add MIdent Accessor To prxIndexSearchResultC
  • Issue #75015 (ENHANCEMENT): Project previews in tooltip have small rectangle on the left side
  • Issue #75049 (ENHANCEMENT): Topology tooltip information could have less informations than column itself
  • Issue #75055 (ENHANCEMENT): Maybe topology results should also be highlighted in yellow
  • Issue #75077 (PROBLEM): Expired End-of-Life projects should be visible per default
  • Issue #75231 (PROBLEM): Overlay has wrong start in part compare
  • Issue #75281 (ENHANCEMENT): Partial search, opened search window on wrong position.
  • Issue #75287 (PROBLEM): Icons overlap in details view
  • Issue #75313 (PROBLEM): Classification 2.0 search, error if we choose "Company make parts" classifications
  • Issue #75333 (ENHANCEMENT): Folder tooltip still visible after using it
  • Issue #75343 (ENHANCEMENT): Make 3D options configurable for search dialogs (geo, partial, raw part)
  • Issue #75367 (ENHANCEMENT): Remove mouse over coloring in compare dialog
  • Issue #75381 (ENHANCEMENT): Use standard toolbar in part compare docking
  • Issue #75403 (ENHANCEMENT): Highlighting of search results in compare tab
  • Issue #75477 (PROBLEM): New Table: Fix scrolling issues
  • Issue #75479 (PROBLEM): New Table: Fix center table line while zooming
  • Issue #75485 (PROBLEM): New Table: Continue search with F3 should not select table line and search should be persistent with line-change
  • Issue #75487 (PROBLEM): New Table: More space between the checkboxes would be good to identify the correct items
  • Issue #75489 (PROBLEM): New Table: Filters are invisible when table line is selected
  • Issue #75493 (ENHANCEMENT): Add angle units to topology search
  • Issue #75495 (PROBLEM): classification 2.0 search, search results not limited to selected values
  • Issue #75647 (PROBLEM): Unhandled Exception during NativeCheckin
  • Issue #75679 (ENHANCEMENT): Drag&Drop images into sketch search
  • Issue #75689 (ENHANCEMENT): Show topology settings in search overview
  • Issue #75721 (PROBLEM): Classification links in PARTdataManager not working
  • Issue #75797 (ENHANCEMENT): Textsearch, " show all results " improvement
  • Issue #75807 (PROBLEM): Derived from SUPPORT Issue: error message by 3DConnexion SpaceMouse Enterprise
  • Issue #75993 (ENHANCEMENT): Move filter assistant visualization to docking in search page
  • Issue #75995 (PROBLEM): Ignore case in filter for class 20 tree
  • Issue #76011 (ENHANCEMENT): Better column width handling with new Qt table
  • Issue #76015 (ENHANCEMENT): BACKSPACE key in index tree for back
  • Issue #76021 (PROBLEM): document scan , problem with import Catia assembly
  • Issue #76231 (PROBLEM): Assemblies currently can not be opened inside of PARTdataManager
  • Issue #76293 (PROBLEM): auto complete doesn't work with NORM catalogs
  • Issue #76317 (PROBLEM): PARTdataManager export wrong visible flag in Ps3 with the new categories
  • Issue #76387 (ENHANCEMENT): New table dialogs: If there is no slider shown, tell the user the possible values
  • Issue #76553 (PROBLEM): full text index generation misses values when resolving not existing FW variables
  • Issue #76745 (ENHANCEMENT): Preferred row filter is not working correctly on list view
  • Issue #76841 (ENHANCEMENT): Docking handling: Double click on tab should go to window mode and keep window sizes
  • Issue #77003 (PROBLEM): Views / "Normal to face" view doesn't work
  • Issue #77127 (PROBLEM): Problem with filtering variables from table in PARTdataManager and PARTeditor
  • Issue #77135 (ENHANCEMENT): Description text for variables missing in filter assistants / class 2.0
  • Issue #77137 (ENHANCEMENT): Filter assistant: Not possible to type some values
  • Issue #77139 (ENHANCEMENT): Class 2.0 Filter assistant: Not possible to type some values like 6,5
  • Issue #77235 (PROBLEM): PARTdatmanger window size not saved
  • Issue #77325 (ENHANCEMENT): New Table GUI: Filter button to deactivate filter for search results
  • Issue #77503 (ENHANCEMENT): Hint for products that will be discontinued is wrong
  • Issue #77507 (ENHANCEMENT): Improve error messages for customdimensions
  • Issue #77565 (ENHANCEMENT): custom search prototype
  • Issue #77751 (ENHANCEMENT): Geosearch , same percentage of similarity but different color
  • Issue #77845 (ENHANCEMENT): Modern layout for vertical table
  • Issue #77869 (ENHANCEMENT): PS3 Export with connection point loses annotation
  • Issue #78025 (ENHANCEMENT): Add pool path link to part information
  • Issue #78193 (PROBLEM): When selecting another directory in index tree, item view should scroll to top
  • Issue #78471 (PROBLEM): Table View - evaluate header options when loading another table
  • Issue #78523 (PROBLEM): Replace Std Icon has wrong colour and dialog shows a alternative part
  • Issue #78667 (PROBLEM): Wrong order of some variables in new table
  • Issue #78757 (PROBLEM): Memory allocation too high in V11 PARTdataManager
  • Issue #79021 (ENHANCEMENT): V11 Topology Information calculation - INCH parts should calculate and display INCH units not Metric
  • Issue #79169 (ENHANCEMENT): Add handling to PARTsolutions (Filterable link projects)
  • Issue #79213 (PROBLEM): Wrong value displayed while changing value range in PARTdataManager
  • Issue #79225 (ENHANCEMENT): Hide options to set Swivel and Tilt in Assembly Rule Dialog
  • Issue #79287 (ENHANCEMENT): Use new Preferred Catalogs page in PARTdataManager
  • Issue #79317 (ENHANCEMENT): Improve mouse usability in sketch search
  • Issue #79401 (PROBLEM): Keyboard navigation does not work for the first time in PARTdataManager
  • Issue #79695 (PROBLEM): Range filter in search result list shows wrong results
  • Issue #79827 (ENHANCEMENT): Filter Assistant: Let control buttons always be visible
  • Issue #79925 (PROBLEM): Class 2.0: Filtered elements don't show controls
  • Issue #79931 (PROBLEM): Class 2.0: 3D is not visible anymore
  • Issue #79985 (PROBLEM): 3D tooltip problems: Wrong size, does not appear or vanish
  • Issue #80027 (PROBLEM): Status widget for no results is displayed when search is still running
  • Issue #80037 (PROBLEM): New sliders: Layout problem, scrolling problem
  • Issue #80079 (PROBLEM): Empty EOL Tooltip for lines with ERP-Numbers
  • Issue #80161 (PROBLEM): Index tooltip on parts with 3d in techpreview has empty tech previews
  • Issue #80205 (ENHANCEMENT): Enhance Styling of Autocomplete view
  • Issue #80275 (ENHANCEMENT): Replace PSolTab with new PSTab in SearchFilterAssistantCreator
  • Issue #80291 (ENHANCEMENT): PARTdataManager does not start (allocates 10GB of memory)
  • Issue #80565 (PROBLEM): Search highlighting changes in a strange way
  • Issue #80587 (PROBLEM): Drop area for docks on the border is too thin
  • Issue #80623 (ENHANCEMENT): Add names of numeric value ranges to mident
  • Issue #80681 (ENHANCEMENT): When ACTIVE is 0 deactivate Replace Parts icons
  • Issue #80749 (PROBLEM): 3d Kernel changed handling of \n in attributes
  • Issue #80885 (PROBLEM): Broken search requests when switching tabs in PARTdataManager
  • Issue #80921 (PROBLEM): Topology search - Translation of drawings labels
  • Issue #80993 (ENHANCEMENT): Make unit column in variable search read-only for now
  • Issue #81111 (PROBLEM): Events from wrong thread cause debug assetions(cef)
  • Issue #81147 (PROBLEM): 3D tooltip sometimes causes crash when closing
  • Issue #81151 (ENHANCEMENT): Remove colors from 3D widget if features are selected
  • Issue #81191 (PROBLEM): Assembly settings wrong checkbox
  • Issue #81195 (PROBLEM): Check assembly configurator mode
  • Issue #81215 (ENHANCEMENT): Allow search classes to override search path settings
  • Issue #82251 (ENHANCEMENT): Add current varset to PLM_DOCVIEW dialog
  • Issue #82431 (ENHANCEMENT): Build class20 cips and provide them for installation
  • Issue #82629 (PROBLEM): STL part in technical preview - toolbar with buttons should be removed
  • Issue #82647 (PROBLEM): Compare with search part in saved search results is broken after restart
  • Issue #83073 (PROBLEM): 3D Tooltip flickering and combobox
  • Issue #83075 (PROBLEM): Automatic filter assistant: Remove animation and keep view if it does not change
  • Issue #83119 (PROBLEM): Search slowed down, when no shared or user index exists
  • Issue #83197 (ENHANCEMENT): Saving location of filter assistants -> class 2.0
  • Issue #83221 (PROBLEM): Layout for Part information dialog box broken in PSOL11
  • Issue #83423 (ENHANCEMENT): Vertical table: Unit bases, indent and context menu issues
  • Issue #83433 (ENHANCEMENT): Make the language also changeable in the details docking like in the details dialog
  • Issue #83455 (PROBLEM): Preview manager updates again and again and again and again
  • Issue #83513 (ENHANCEMENT): Template Editor Actions not showing up
  • Issue #83623 (PROBLEM): Wrong translation in Docking "floating-point number"
  • Issue #83625 (PROBLEM): Help tooltip with CEF sometimes too narrow or has scrollbars
  • Issue #83651 (PROBLEM): Partial search limited to 49 results for some parts
  • Issue #83661 (PROBLEM): Crash during loading of 2D part
  • Issue #83683 (PROBLEM): Color of part not correct
  • Issue #83705 (ENHANCEMENT): Classification 2.0 search - Variable column width problem
  • Issue #83713 (PROBLEM): Previews always made in front view
  • Issue #83741 (PROBLEM): Blunt pyramid - error when setting variable values
  • Issue #83803 (ENHANCEMENT): Classification 2.0 search should not show hidden projects
  • Issue #83841 (PROBLEM): Classification 2.0 search - value ranges could not be changed
  • Issue #83895 (ENHANCEMENT): PARTdataManager V11 - Selection value range incorrect
  • Issue #83909 (PROBLEM): "Show graphics in table" does not work
  • Issue #84049 (PROBLEM): Settings -> "Columns to hide" doesn't work
  • Issue #84189 (ENHANCEMENT): End of life dialog does not appear when opening a part from search results
  • Issue #84195 (ENHANCEMENT): Search filter icon in table: Status "disabled" is missing
  • Issue #84207 (PROBLEM): Top level history items missing on the right side
  • Issue #84245 (PROBLEM): Slider in value range field does not work
  • Issue #84291 (ENHANCEMENT): Add products to Part comparison without the table
  • Issue #84485 (ENHANCEMENT): Filter in table is deleted if not pressing "ENTER"
  • Issue #84489 (PROBLEM): PARTdataManager showing wrong EOL date added with JSON

Component PSol/PARTdataManager/connection

  • Issue #72771 (ENHANCEMENT): Add pcon as dock inside part view

Component PSol/PARTsupport

  • Issue #28559 (ENHANCEMENT): Link to the Mail which is generated if the user has no active Mail client should be clickable
  • Issue #43609 (ENHANCEMENT): Enlarge system information with standard catalog data

Component PSol/PARTvbsCompiler

  • Issue #54137 (ENHANCEMENT): Implement VBS intelligence
  • Issue #66655 (PROBLEM): Objects in debugger tooltip are not expandable
  • Issue #72571 (ENHANCEMENT): Attach breakpoints to codeline in PVBSCompiler
  • Issue #72861 (ENHANCEMENT): Open qm files with linguist in vbb admin
  • Issue #77365 (PROBLEM): VB Debugger does not release objects when exception occurs
  • Issue #77607 (PROBLEM): on error resume next passed to client if debugger is attached

Component VBS/AddOns

  • Issue #48963 (PROBLEM): erp_export_ts.vbb - Problem with negative parts
  • Issue #49391 (ENHANCEMENT): PARTvbbadmin - possibility to start VBB from PARTvbbadmin
  • Issue #61651 (ENHANCEMENT): Mark vbs Modules as thread safe
  • Issue #61709 (ENHANCEMENT): Rework statistics script
  • Issue #67531 (PROBLEM): PARTvbbadmin: external dependency mfc140.dll

Component WareHouse/API

  • Issue #80613 (ENHANCEMENT): Uid twice in ConnectionString, pwserver.cfg

Component WareHouse/ArticleAssignment

  • Issue #47193 (PROBLEM): Progress bar for process shows 100%, however it's not finished
  • Issue #47809 (ENHANCEMENT): Add count to csv import name if csv with same name imported a second time
  • Issue #50641 (PROBLEM): Alphabetical sorting for column selection in export process
  • Issue #62075 (ENHANCEMENT): There is no "Run" text on button for starting the pipeline
  • Issue #64339 (PROBLEM): PARTdatacenter remove link with ENTF would remove product
  • Issue #64575 (PROBLEM): PARTdatacenter problems with filter functionalities, products after enlarge amount or visible products not longer visible
  • Issue #64599 (ENHANCEMENT): PARTdatacenter progress windows while modify link is opened but must be closed from user, one click less would be nice per link
  • Issue #64601 (PROBLEM): PARTdatacenter add attribute its possible to add catalog node, this shouldn't be possible
  • Issue #64603 (ENHANCEMENT): PARTdatacenter it should be visible how much datasets are in the csv which should be used for catalog import
  • Issue #64609 (ENHANCEMENT): PARTdatacenter after import it should be visible how much products generated and so on
  • Issue #64641 (PROBLEM): PARTdatacenter delete/remove process occur into a internal error
  • Issue #64645 (PROBLEM): PARTdatacenter map iso csv imported catalog it occur into crash in article meta search
  • Issue #64799 (PROBLEM): PARTdataCenter crash at 100% when running pipeline
  • Issue #64807 (PROBLEM): pdc csv export: multiple assignments setting ignored
  • Issue #64903 (PROBLEM): automatic optimization of dimension column
  • Issue #64911 (PROBLEM): PARTdatacenter crash when use mapping with custom column
  • Issue #64943 (ENHANCEMENT): multi selection for columns
  • Issue #64945 (ENHANCEMENT): evaluate form information for projects
  • Issue #66263 (ENHANCEMENT): Clarification on used catalogs needed for attribute text mapping
  • Issue #67071 (PROBLEM): PARTdatacenter only latest 1000 products could be mapped
  • Issue #67537 (PROBLEM): Field/column name search is not working
  • Issue #78589 (ENHANCEMENT): CNSORDNERNO should be used for article number search in PARTdatacenter
  • Issue #83581 (PROBLEM): PARTdataCenter - Variants are not Taken DIN 179 Form a and b

Component WareHouse/BMEcat

  • Issue #68759 (ENHANCEMENT): BMEcat Catalog Write and Update Component
  • Issue #78575 (ENHANCEMENT): Import BMEcat catalogs into PARTdataCenter
  • Issue #83241 (PROBLEM): No save dialog for pipeline pwp-file in PARTdataCenter BMEcat module

Component WareHouse/CatalogUpdater

  • Issue #75187 (ENHANCEMENT): rebuild an existing class (export psol)
  • Issue #77647 (PROBLEM): problems after renaming a class with pdc
  • Issue #78621 (PROBLEM): No " Variable with Order Number " detected in PARTdataCenter catalogs

Component WareHouse/Core

  • Issue #1278 (ENHANCEMENT): Add VBS nodes to pipeline
  • Issue #81957 (PROBLEM): CSV export for PARTdataCenter

Component WareHouse/DuplicateAnalysis

  • Issue #83739 (ENHANCEMENT): Create custom duplicate report functionality

Component WareHouse/GUI

  • Issue #63203 (ENHANCEMENT): PARTdatacenter: "Export" missing in context menu
  • Issue #64267 (ENHANCEMENT): PARTdatacenter: show edges in pipeline editor
  • Issue #64341 (ENHANCEMENT): PARTdatacenter button for restore function should be restore and not ok
  • Issue #64343 (PROBLEM): PARTdatacenter run button is empty -> sheme/gui problem
  • Issue #69543 (PROBLEM): PARTdatacenter hangs when opening an STL as a technical preview
  • Issue #80929 (ENHANCEMENT): Add manual class selection to classification wizard

Component WareHouse/PLM Synchro

  • Issue #44211 (ENHANCEMENT): Possibility to restart plmsynchro automatically at last part
  • Issue #52971 (ENHANCEMENT): PLMsynchro - Classimporter support for PREVIEW and VIEW1-3
  • Issue #55265 (PROBLEM): PLMsynchro FSO with Solidworks- Projects with sub-assemblies could not be imported
  • Issue #56187 (PROBLEM): PLMSynchro - DocumentNameEqual doesn't work if the SearchBasePath contain shortcuts
  • Issue #60839 (ENHANCEMENT): Enhancements for PdmProxyCSVPdmIfaceC
  • Issue #60841 (ENHANCEMENT): Set TEMPMODE=1 for initial import via PLMSynchro
  • Issue #60845 (ENHANCEMENT): Improve keepLocation for PLMsynchro
  • Issue #61979 (PROBLEM): PLMsynchro import for Creo E/DM 19 does not work when there is only one file
  • Issue #62093 (ENHANCEMENT): PLMsynchro: Add query filter
  • Issue #62643 (ENHANCEMENT): More enhancements for PdmProxyCSVPdmIfaceC
  • Issue #63123 (ENHANCEMENT): PLMsynchro FSO with NX - Can't import parts with Special chars in the path
  • Issue #65353 (PROBLEM): OSDM PLMs broken due to naming conflicts
  • Issue #65463 (ENHANCEMENT): Variables values in varsearch.cfg
  • Issue #67115 (ENHANCEMENT): PLMsynchro - solve problem with complex attributes
  • Issue #67239 (PROBLEM): PLMsynchro: CATIA part with material assigned fails conversion
  • Issue #67481 (PROBLEM): PLMsync/CATIA: Crash during conversion
  • Issue #68225 (ENHANCEMENT): Attribute categories for PLMSynchro
  • Issue #68413 (ENHANCEMENT): PLMsynchro - separate stats for each conversion
  • Issue #68535 (ENHANCEMENT): PLMsync: Plugin for time measurement
  • Issue #68723 (PROBLEM): PLMsynchro: CATproduct with two levels of subassemblies fails conversion
  • Issue #68917 (ENHANCEMENT): Add more criteria to plmsyncro query with PDMLink
  • Issue #68929 (ENHANCEMENT): CATIA FSO plmsyncro query uses lot of RAM
  • Issue #71463 (PROBLEM): PLMsynchro - If a Part could not be converted the PLMsynchro process stops
  • Issue #71819 (PROBLEM): Capvidia STEP QIF has too high mesh settings and occur into too big zjvs
  • Issue #72147 (PROBLEM): PLMsynchro import does not work for some subfolders
  • Issue #72277 (PROBLEM): PLMsynchro - NX does no close after import is done
  • Issue #72301 (PROBLEM): PLMsynchro not working with CATIA, PSOL11
  • Issue #72399 (ENHANCEMENT): plmsynchro: Project Attributes wrong format
  • Issue #72463 (PROBLEM): PLMsynchro process does not report when import is finished
  • Issue #72817 (PROBLEM): PLMsynchro - OSDM import always imports just one part, names it (root)
  • Issue #73109 (PROBLEM): PLMsynchro - Solidworks PLMs not working in V11 (after ISO01042016)
  • Issue #73645 (PROBLEM): PLMsynchro - units not imported correctly for NX
  • Issue #73843 (PROBLEM): PLMsynchro - units not imported correctly for Solidedge ST8, PSOL11
  • Issue #75257 (PROBLEM): pdllhost.exe has a memory leak, watchdog not working
  • Issue #75405 (ENHANCEMENT): Create active CAD document source node
  • Issue #75471 (PROBLEM): PLMsynchro - Inventor assembly geometry missing sometimes with Capvidia
  • Issue #75625 (ENHANCEMENT): plm synchro conditions for fso/capvidia import
  • Issue #77105 (ENHANCEMENT): PLMSYNCHRO : use latest service method implementations
  • Issue #77645 (ENHANCEMENT): PARTwareHouse Pipeline support for creating / exporting native catalogs
  • Issue #77919 (ENHANCEMENT): Implement index update lucene on single line or project
  • Issue #78797 (PROBLEM): PLMsynchro - Solidworks PLMs not working in V11 (after ISO22092016)
  • Issue #82097 (ENHANCEMENT): PLMsync/all: Differentiate between kill cad because watchdog triggered/because we are done
  • Issue #82413 (PROBLEM): PLMsynchro FSO Solidworks, import broken in PSOL11

Component WareHouse/StructureAndClassify

  • Issue #60689 (PROBLEM): deleted classes, folders and catalogs never disappear (links)
  • Issue #60735 (ENHANCEMENT): user rights: invisible classes/products
  • Issue #62889 (PROBLEM): PARTdatacenter - some catalogs can't be exported to PARTsolutions
  • Issue #63113 (PROBLEM): PARTdatacenter - technical preview is not visible in PARTdataManager
  • Issue #63423 (PROBLEM): PARTdatacenter - button in Technical drawing window is not working
  • Issue #63715 (PROBLEM): Move PDataCenter General Settings from PWGui to App
  • Issue #63835 (PROBLEM): PARTdatacenter - default language selection always German
  • Issue #63837 (PROBLEM): PARTdatacenter - no tooltips on one of the toolbars
  • Issue #63911 (PROBLEM): PARTdatacenter - when adding New Class, maybe dialog to rename would be welcome
  • Issue #63943 (PROBLEM): PARTdatacenter - when visibility of class is changed, it is not shown in history
  • Issue #63953 (PROBLEM): PARTdatacenter - British English available to select, but not really selectable
  • Issue #63973 (PROBLEM): PARTdatacenter - when preview image is added manually, if not correct ratio, it's shown incorrectly
  • Issue #63991 (PROBLEM): PARTdatacenter - when CSV line is added to part compare from products, there are 2 entries
  • Issue #77445 (PROBLEM): change add technical view

Component _components/2D-Derivation

  • Issue #19374 (PROBLEM): Hangup on deep Zoom in 2d View
  • Issue #44731 (PROBLEM): Thread - wrong display in 3db when sketch is drawn under some angle
  • Issue #58439 (PROBLEM): Hatchobject in Autocad complete green because no line in object is visible
  • Issue #72297 (PROBLEM): Vector views won't update if used in Drawingview(Combinationview)
  • Issue #72725 (PROBLEM): 2D BMP, 2D JPEG and 2D TIFF formats are blank when downloaded from any pcomm portal - v5
  • Issue #75909 (ENHANCEMENT): Use view axis also in 2D derivation
  • Issue #80029 (ENHANCEMENT): Create Editor for 2D Derivation combinationview
  • Issue #80545 (PROBLEM): 2D-Derivation Printing Sometime opengl is mirrored

Component _components/3D-Assembly-Core

  • Issue #35793 (PROBLEM): Adding parts to parts which hang on copied points is not possible
  • Issue #58691 (ENHANCEMENT): Share partdata for equal parts
  • Issue #58699 (ENHANCEMENT): Rework FaceInfos
  • Issue #58701 (ENHANCEMENT): Speedup FeMesh delete
  • Issue #66025 (PROBLEM): Crash in debug mode of memory manager when cleaning up ass main
  • Issue #67219 (PROBLEM): Check if number of triangles exceeded is incorrect for zjv assemblies
  • Issue #67221 (PROBLEM): In some cases, only the first part of zjv assembly is loaded
  • Issue #79223 (ENHANCEMENT): Scan Matininformations from existing Catalogs (Swivel/Tilt)

Component _components/3D-Core

  • Issue #854 (ENHANCEMENT): Add champfer/Fillet as feature to ECAT
  • Issue #51253 (PROBLEM): Crash of large assembly (Razional)
  • Issue #63115 (PROBLEM): Problem with transparent part in the designer 3D view
  • Issue #65685 (PROBLEM): Catalog motor models broken 3D view
  • Issue #72441 (ENHANCEMENT): Mechanical simulation definitions on rules
  • Issue #74907 (PROBLEM): Brennan - Thread display wrong
  • Issue #80817 (ENHANCEMENT): Mechanical simulation definitions on rules: show Unit instead of Format

Component _components/3D-View

  • Issue #59177 (PROBLEM): PARTcommunity web page does not work in PARTdataManager anymore
  • Issue #59771 (ENHANCEMENT): Make 3D dimensions clickable and changeable in 3D part view
  • Issue #60173 (ENHANCEMENT): The right MB+left MB doesn't work same in technical details and in 3d view
  • Issue #60431 (PROBLEM): Graphic glitch during sweep cut extrude
  • Issue #65143 (PROBLEM): Part which is moved far away from 0/0/0 can't be zoomed
  • Issue #66403 (PROBLEM): Access violation when measuring
  • Issue #67197 (PROBLEM): Better click area for 3D dimensions
  • Issue #71345 (ENHANCEMENT): Feature recognition on 3db
  • Issue #71955 (PROBLEM): LOD switch -> Some artifacts stay
  • Issue #72321 (PROBLEM): ZJV colors sometimes wrong in V11 (black)
  • Issue #72883 (PROBLEM): PARTdataManager - docking windows visual bug when moving windows
  • Issue #72999 (PROBLEM): Compare pane slow and consuming much memory when selecting large feature
  • Issue #74113 (PROBLEM): Remove dimensions in 3D compare overlay (or show only selected)
  • Issue #74125 (PROBLEM): 3D View Mouse gestures do not work
  • Issue #74405 (ENHANCEMENT): Change default 3D background to neutral color for better reading of dimensions
  • Issue #74569 (PROBLEM): Clickable dimensions: DIN 2510-3 can't change length
  • Issue #74827 (ENHANCEMENT): Additional mode for mouse rotation around 3D model
  • Issue #75401 (ENHANCEMENT): Support for compound features in feature selection manager
  • Issue #75671 (PROBLEM): If connection point under logo, it cannot be clicked
  • Issue #76595 (PROBLEM): Check results of feature recognition on 3dbs
  • Issue #78651 (ENHANCEMENT): Animation always only around up-axis
  • Issue #79025 (PROBLEM): Negative major diameter in torus (feature recognition on 3dbs)
  • Issue #80049 (PROBLEM): Feature selection in 3d tooltips of assemblies does not work correctly
  • Issue #83593 (PROBLEM): Example part where clicking on 3d dimension does not work

Component _components/Analysis-Purchineering

  • Issue #26217 (PROBLEM): Print from duplicate report is cut and not adjusted to pages
  • Issue #28580 (ENHANCEMENT): Purchineering: further performance optimizations
  • Issue #31055 (ENHANCEMENT): Refactoring of reporting/analysis engine
  • Issue #31301 (ENHANCEMENT): Price search enhancements
  • Issue #32743 (ENHANCEMENT): Export analyses
  • Issue #35991 (ENHANCEMENT): Optimize html report performance
  • Issue #50621 (PROBLEM): Crash when scrolling in report
  • Issue #59267 (ENHANCEMENT): Duplicate report enhancements
  • Issue #64303 (ENHANCEMENT): Define default states and icons for duplicate analysis
  • Issue #65099 (PROBLEM): Duplicates report - export results to PDF freezes PARTdataManager when >1000 results
  • Issue #65513 (ENHANCEMENT): Reports: Mark already proved duplicates
  • Issue #65515 (ENHANCEMENT): Report sharing
  • Issue #65581 (ENHANCEMENT): OSDM docscan native checkin import preview cut off
  • Issue #73073 (ENHANCEMENT): Text filter in duplicate analysis
  • Issue #73107 (ENHANCEMENT): Create scripting interface for new analyses
  • Issue #73285 (ENHANCEMENT): Duplicate report should be possible only with textual attributes or columns
  • Issue #76191 (PROBLEM): Supplier branches report export to PDF does not work
  • Issue #84127 (ENHANCEMENT): Add options for size-dependent search and filter of mirrored parts to duplicate analysis

Component _components/API (C++/VBS/COM)

  • Issue #48771 (ENHANCEMENT): Add keyword to log entry/exit of VB code automatically
  • Issue #54829 (ENHANCEMENT): Second encounter : Report symbol errors for VB on compile
  • Issue #61971 (ENHANCEMENT): Implement doxygen docu for cpp and vbs
  • Issue #62717 (PROBLEM): Autoproxy does not work for some scripts starting with V10 scripting
  • Issue #62919 (PROBLEM): VB allows class declare inside class which is not supported for all possible cases
  • Issue #67091 (ENHANCEMENT): VBS Engine : Add weak reference
  • Issue #68405 (ENHANCEMENT): MZCOM: Add support for VT_RECORD
  • Issue #68683 (PROBLEM): VBS Operator "INC" use first type and truct double
  • Issue #68925 (ENHANCEMENT): VB exception/Error dialog: Misc usability enhancements
  • Issue #71357 (PROBLEM): mzScriptInvokeByName does not honor thread stickyness
  • Issue #71975 (ENHANCEMENT): Use Qt XML proxies in Archicad interface
  • Issue #73493 (PROBLEM): BitmapCondition can not be deleted by script
  • Issue #73531 (PROBLEM): Function return set is not equal than in v10
  • Issue #73579 (PROBLEM): Add Version stamp of compiled version to VBB file
  • Issue #74793 (ENHANCEMENT): <CONFIG(file, section, key)> does not work with categories
  • Issue #75821 (ENHANCEMENT): Allow to specify primary keys explicitly
  • Issue #79149 (PROBLEM): Add function pointers to VBS
  • Issue #79303 (ENHANCEMENT): Exit/Continue inside for could be misused
  • Issue #79429 (ENHANCEMENT): Add proxy functions to get vargroups
  • Issue #79455 (ENHANCEMENT): Add appserver functions to get vargroups
  • Issue #80047 (ENHANCEMENT): VBB compiler : detect wrong return value overwrite
  • Issue #80193 (ENHANCEMENT): Unterminated string warning when translating VBS files with line breaks in strings
  • Issue #80863 (ENHANCEMENT): New XML proxy based on Qt XML
  • Issue #81217 (PROBLEM): pvbscompiler: Stepping over a macro behaves weirdly

Component _components/Browser

  • Issue #40845 (ENHANCEMENT): Check jquery mobile with WebKit
  • Issue #41621 (PROBLEM): Text direction submenu appears twice in webkit context menu
  • Issue #47457 (PROBLEM): https://www.pisco.co.jp/ does not load in Webkit
  • Issue #61867 (ENHANCEMENT): Integrate CEF
  • Issue #81219 (PROBLEM): Browser History can get large and thus slow down PARTdataManager startup
  • Issue #82615 (PROBLEM): Preferred catalogs window can not be turned off
  • Issue #82999 (PROBLEM): Adding QObjects to JavaScript context does not work properly
  • Issue #83781 (PROBLEM): Custom JavaScript Objects in CEF not always available
  • Issue #84201 (PROBLEM): Enable Return Values for Custom JS Objects in Cef

Component _components/Compare View

  • Issue #75719 (PROBLEM): Selecting another table line in part compare does not work
  • Issue #75869 (PROBLEM): Open part in PARTdataManager from part compare does not set the varset
  • Issue #75871 (PROBLEM): The distance between opposed parts is wrong
  • Issue #75895 (PROBLEM): Dimensions are not scaled for INCH parts in part compare
  • Issue #75987 (ENHANCEMENT): Add custom dimensions to part compare 2D derivation
  • Issue #77299 (PROBLEM): Threads for INCH parts not displayed in part compare
  • Issue #78135 (PROBLEM): Positions of parts incorrect after aligning parts
  • Issue #78169 (ENHANCEMENT): Highlight any search results in part compare
  • Issue #79805 (PROBLEM): When there is no geometry in part comparison, no close button is shown
  • Issue #82789 (PROBLEM): Missing elision in comparison tab
  • Issue #82791 (PROBLEM): When executing full text search and adding search results to compare tab, a node for geometrical similarity is shown
  • Issue #83185 (PROBLEM): Update technical views when changing table line

Component _components/Documentation

  • Issue #76401 (ENHANCEMENT): enhance documentation - template file - set path to new destination

Component _components/FullTextSearch

  • Issue #35307 (ENHANCEMENT): Settings from search results should open the settings from the search i have done
  • Issue #48515 (PROBLEM): Textsearch Keywords JPN
  • Issue #48851 (ENHANCEMENT): Exact full text search
  • Issue #50801 (PROBLEM): Marking is missing at text/string search with ""
  • Issue #50861 (ENHANCEMENT): Make search for part numbers with asterisk possible from both sides (*38384 or 48485*)
  • Issue #51343 (PROBLEM): Full text search results with ERP variants not correctly
  • Issue #52153 (ENHANCEMENT): Variable Search - DropDown entries
  • Issue #58689 (ENHANCEMENT): Partial full text search doesn't work
  • Issue #61277 (ENHANCEMENT): Integrate topology any-search in full text search
  • Issue #64087 (PROBLEM): Refactor code of auto completion view (GUI)
  • Issue #65475 (ENHANCEMENT): Make exact search better as temporary solution until new lucene
  • Issue #69535 (ENHANCEMENT): Show topology column in search result view when numbers are in search query
  • Issue #72871 (ENHANCEMENT): full text search index: do not index numeric values of unresolved value ranges
  • Issue #73003 (PROBLEM): Manage index creation failure better when disk is full
  • Issue #73327 (ENHANCEMENT): Auto Complete: Check config whether it is enabled
  • Issue #73719 (PROBLEM): Preferred row not working with full-text search
  • Issue #74891 (PROBLEM): Tolerance in any search feature doesn't work good
  • Issue #75331 (ENHANCEMENT): Topology any search index in lucene - Only enable for configured catalogs
  • Issue #76493 (PROBLEM): Search using classification (eClass) does not list all parts
  • Issue #77197 (ENHANCEMENT): IndexGenerator: Allow to update single rows
  • Issue #77199 (ENHANCEMENT): Lucene Index: Allow to update single rows
  • Issue #78091 (PROBLEM): Variable value not highlighted
  • Issue #78183 (ENHANCEMENT): Extend lucene query parser to support ranges
  • Issue #78591 (ENHANCEMENT): CNSORDERNO should be available in the variable search to search over all catalogs and order numbers

Component _components/GeomSearch

  • Issue #19270 (ENHANCEMENT): Algorithm to find/not find mirrored parts
  • Issue #19271 (ENHANCEMENT): Add options to geosearches like mirrored and rotation symmetric
  • Issue #21356 (ENHANCEMENT): Add features to topology search (Main Issue)
  • Issue #21357 (ENHANCEMENT): Find slotted holes
  • Issue #21360 (ENHANCEMENT): Search for hole patterns in planes
  • Issue #21413 (ENHANCEMENT): Make more information about the holes available
  • Issue #22133 (ENHANCEMENT): Allow search for objects with properties
  • Issue #22747 (ENHANCEMENT): Topology Search: New parameter for cylinder search -> Length
  • Issue #27765 (ENHANCEMENT): Efficient indexing for partial geometrical search
  • Issue #27766 (ENHANCEMENT): Persistence storage for partial geometrical search
  • Issue #27767 (ENHANCEMENT): Framework for creating fingerprints for partial geometrical search
  • Issue #28878 (ENHANCEMENT): In the rawpartsearch/rohteilsuche a viewer should be nice
  • Issue #28901 (ENHANCEMENT): Make Duplicate Analysis ready for large datasets
  • Issue #36827 (PROBLEM): Marking searched part in new result view
  • Issue #37197 (PROBLEM): Do not show error message during geo index creation if the stl is missing
  • Issue #51365 (ENHANCEMENT): Better automatic alignment in compare dialog
  • Issue #56085 (ENHANCEMENT): Proxy for partial search
  • Issue #61557 (PROBLEM): FV5 delivers bad result for very similar parts
  • Issue #61721 (ENHANCEMENT): Compare Dialog - File name and path of CAD part
  • Issue #61819 (ENHANCEMENT): Find out if a sketch was drawn in lines only and then show warning to the user
  • Issue #62597 (ENHANCEMENT): Extend logging in geo search
  • Issue #63553 (PROBLEM): When building pappserver with VC14, the application does not terminate when geo index preloader has run
  • Issue #63681 (ENHANCEMENT): Small optimization when loading / unloading linear index
  • Issue #63775 (ENHANCEMENT): New gui for topo search dialog
  • Issue #63947 (PROBLEM): Check source info usage in duplicate analysis
  • Issue #64585 (ENHANCEMENT): Optimizations for geo search
  • Issue #65321 (ENHANCEMENT): The search results don't reset to standard after you press the show more results button
  • Issue #65373 (ENHANCEMENT): Possible improvements in geo search algos
  • Issue #65509 (ENHANCEMENT): Partial geometric search for V11
  • Issue #66157 (ENHANCEMENT): Add missing attributes for features
  • Issue #66911 (PROBLEM): Crash during link window search when opening file from compare dock
  • Issue #66917 (PROBLEM): Crash during topo search
  • Issue #66973 (ENHANCEMENT): Create framework for partial search
  • Issue #67215 (PROBLEM): Crash when closing PARTdataManager during link window search
  • Issue #67529 (PROBLEM): The calculation of imported parts from plmsynchro is very slow in part compare and uses a lot of memory
  • Issue #68227 (ENHANCEMENT): Gui for search for hole patterns
  • Issue #68583 (ENHANCEMENT): Update kdtree++
  • Issue #68901 (ENHANCEMENT): Mechanism to ignore files that could not be fingerprinted when running geo index generation again
  • Issue #68941 (ENHANCEMENT): Check status of stream after reading header of files in topo / geo index
  • Issue #69007 (PROBLEM): Multi-threading problems with cache of geo when updating link db index
  • Issue #69013 (ENHANCEMENT): Iterator for topo attributes that can be used by full-text search index generator
  • Issue #69597 (ENHANCEMENT): Remove any search index from topo database
  • Issue #69599 (ENHANCEMENT): Hole patterns for elongated holes
  • Issue #69601 (ENHANCEMENT): Search for cones
  • Issue #69753 (PROBLEM): Crash when trying to create topo nodes of previous versions
  • Issue #71495 (ENHANCEMENT): Adapt feature recognition code for Capvidia to work together with Issue #71479
  • Issue #71973 (PROBLEM): Memory freed later than necessary when removing parts from part compare
  • Issue #71995 (PROBLEM): No notifications for missing geosearch licenses
  • Issue #72179 (PROBLEM): Topology search for patterns in V11 does not work correctly
  • Issue #72711 (ENHANCEMENT): Include / exclude lists for geo index preloader
  • Issue #72803 (PROBLEM): Crash when deleting node from topo index
  • Issue #72963 (ENHANCEMENT): Do not add feature for perpendicular planes
  • Issue #73079 (PROBLEM): Search with unit other than mm does not work in new topo dialog
  • Issue #73407 (ENHANCEMENT): If opening a file in geo search dialog failed, show message box with error message
  • Issue #73481 (PROBLEM): Search for hole pattern does not work when amount and hole diameter is set, but pattern diameter is not set
  • Issue #73883 (PROBLEM): Feature selection of topo results in 3D tooltips does not work for assemblies
  • Issue #74199 (ENHANCEMENT): Test whether it is possible to use standard triangulation accuracy without making search results of geo search worse
  • Issue #74201 (ENHANCEMENT): Display new features in compare dialog
  • Issue #74563 (ENHANCEMENT): Some of the topology search features look weird
  • Issue #74591 (PROBLEM): Features are not highlighted in 3D tooltip if condition for hole type is set
  • Issue #74645 (ENHANCEMENT): Geo search window update
  • Issue #74693 (ENHANCEMENT): Activate partial search by default
  • Issue #74721 (PROBLEM): Topology search; Improve hole pattern algorithm for slots
  • Issue #74971 (PROBLEM): Geometric search; doesn't open right combination of value range in search result
  • Issue #75099 (ENHANCEMENT): Highlighting in search results does not work with new topo search
  • Issue #75335 (ENHANCEMENT): Tool to restore offset index from fingerprint database
  • Issue #76003 (PROBLEM): Abort geo index run if there problems reading files
  • Issue #76237 (ENHANCEMENT): Make dynamic topo columns work with new topo search conditions
  • Issue #76239 (ENHANCEMENT): Add more attributes to any search
  • Issue #76275 (PROBLEM): If cache size is to small to preload offset index and linear index, search may be very slow
  • Issue #76413 (ENHANCEMENT): Add filter widget to new topo columns
  • Issue #76443 (ENHANCEMENT): Csv exports for topo columns / dynamic topo columns
  • Issue #76527 (ENHANCEMENT): Combine dialogs for importing images in sketcher
  • Issue #76817 (ENHANCEMENT): Update tests for geo / topo search to use repository for test data
  • Issue #76983 (ENHANCEMENT): Automatically find holes in import dialog for sketches
  • Issue #77119 (ENHANCEMENT): Duplicate search -> Let user set decimal places in similarity
  • Issue #77161 (ENHANCEMENT): New descriptions for topology search
  • Issue #77237 (ENHANCEMENT): Add Seamless Partial Search Code for Calling
  • Issue #77281 (ENHANCEMENT): Memory consumption in color search
  • Issue #77857 (ENHANCEMENT): Class 2.0: Adding own parts to available filter assistants
  • Issue #77901 (ENHANCEMENT): When loading mesh fails, do not add the entry to geo search history
  • Issue #78143 (PROBLEM): If catalog is not configured for partial search, do not show partial search algos in fingerprint manager
  • Issue #78225 (ENHANCEMENT): Use standard accuracy for fingerprinting
  • Issue #78275 (PROBLEM): Unnecessary index locks when initializing geo search
  • Issue #78323 (ENHANCEMENT): Release memory earlier when creating linear index
  • Issue #78327 (ENHANCEMENT): Make chunk size for topo index generation configurable in geomsearch.cfg and increase defaults
  • Issue #78475 (ENHANCEMENT): Add proxy for partial search to pass features and meshes
  • Issue #78783 (ENHANCEMENT): Add geosearch option "mirrored" vs. show in search results as column
  • Issue #79075 (ENHANCEMENT): Test for partial search
  • Issue #79143 (ENHANCEMENT): Allow creation of cluster map for one part
  • Issue #79331 (PROBLEM): LiveSearch accuracy, shows results with smaller percentage than set
  • Issue #79481 (ENHANCEMENT): Find negative parts with partial search
  • Issue #79753 (ENHANCEMENT): Proxy for new structure of topo search conditions
  • Issue #79853 (PROBLEM): Display attributes of the hole when searching for hole patterns
  • Issue #79937 (ENHANCEMENT): Test for new topo search proxies
  • Issue #79987 (ENHANCEMENT): Find better algorithm to compare planes in partial search
  • Issue #80013 (PROBLEM): Infinite recursion in topo search
  • Issue #80017 (PROBLEM): Multiplicity for distances and angles does not work correctly with new topo search
  • Issue #80039 (PROBLEM): Selecting features from topo search result in 3D does not work for INCH parts
  • Issue #80075 (PROBLEM): Missing results when doing topo search in some cases
  • Issue #80083 (PROBLEM): 3D tooltip selects patterns that did not match all conditions from topo search
  • Issue #80099 (PROBLEM): Circular pattern contains hole which is not on the circle defined by the other holes
  • Issue #80147 (PROBLEM): Highlighting of search results for attributes of holes does not work when searching for hole patterns
  • Issue #80169 (PROBLEM): Problems in topo search concerning counterbore / countersink
  • Issue #80289 (PROBLEM): Exception when creating geo index for pn_standards
  • Issue #80371 (PROBLEM): Incorrect feature ids when creating fingerprints of assemblies
  • Issue #80407 (PROBLEM): Use QImage instead of QPixmap in IndexTreeGeomSearchSourceInfoC
  • Issue #80703 (PROBLEM): Mouse over effect does not work correctly in partial search
  • Issue #80715 (ENHANCEMENT): Do not use colors in 3d preview for partial search
  • Issue #80721 (ENHANCEMENT): Button to deselect all features in 3d of partial search dialog
  • Issue #80779 (PROBLEM): Inconsistent definition of attribute pointInPlane
  • Issue #80781 (PROBLEM): Inefficient and space-consuming algorithm to compare compound features
  • Issue #80783 (PROBLEM): Inconsistent axis direction for hole
  • Issue #80841 (ENHANCEMENT): Only allow holes with same diameter in pattern
  • Issue #80899 (PROBLEM): Crash in PARTadmin after closing fingerprint management dialog
  • Issue #80947 (PROBLEM): When starting partial search from context menu, the option "new tab" is ignored
  • Issue #81149 (PROBLEM): Button to switch between features selection sometimes is shown twice
  • Issue #81205 (PROBLEM): Non-adjacent planes in same feature when converting part with Capvidia
  • Issue #81233 (PROBLEM): Inconsistent / incorrect axis and angles in sphere when using Capvidia translator
  • Issue #81279 (PROBLEM): Inconsistent axes for hole patterns
  • Issue #81299 (ENHANCEMENT): Improve history in partial search dialog
  • Issue #81557 (PROBLEM): First line of first project is missing in partition map
  • Issue #81659 (PROBLEM): Symmetry check for very small parts does not work
  • Issue #82435 (ENHANCEMENT): Diameter name should be changed in topology help
  • Issue #82465 (ENHANCEMENT): Versioning of feature recognition
  • Issue #82489 (ENHANCEMENT): Circular pattern topology search - rename "Positions"
  • Issue #82657 (ENHANCEMENT): Increase ERP filter cache size
  • Issue #83265 (PROBLEM): problems toposearch cone
  • Issue #83401 (ENHANCEMENT): Partial search: Show message if nothing is selected
  • Issue #83403 (ENHANCEMENT): Partial search: Replace percentage with configurable values
  • Issue #83431 (ENHANCEMENT): Mirrored parts: Icon location and configurable visibility

Component _components/Logging

  • Issue #39003 (PROBLEM): PARTsolutions version is missing in PARTlogviewer
  • Issue #42759 (ENHANCEMENT): Add drag&drop support to log viewer
  • Issue #62777 (ENHANCEMENT): Jump into code from Log Viewer
  • Issue #62781 (ENHANCEMENT): Plogviewer line break if log message is to long would be very nice, otherwise tooltip
  • Issue #62797 (ENHANCEMENT): Direct open in log viewer
  • Issue #62799 (ENHANCEMENT): Possibility to open more then one log file would be nice
  • Issue #62801 (ENHANCEMENT): Copy text from logs
  • Issue #62973 (ENHANCEMENT): Make Logger colors configurable
  • Issue #63537 (PROBLEM): Logging table empty when opening multiple log files parallel

Component _components/Qt

  • Issue #77077 (PROBLEM): PARTdataManager hangs sometimes when bitmap from OneNote is added to clipboard

Component _components/WebViewer

  • Issue #75951 (PROBLEM): Add holograph view with four sides to WebViewer

Component _exports/CORE

  • Issue #34311 (PROBLEM): PS3 content has inaccurate output for 3d arc
  • Issue #40257 (PROBLEM): Export dialog must show only the right file extension
  • Issue #72561 (ENHANCEMENT): Embedded files in Export menu

Component _exports/Images (BMP/GIF/JPG/PNG/TIFF/...)

  • Issue #66119 (PROBLEM): Memleak when exporting animated GIF with Floyd-Steinberg dithering
  • Issue #66195 (PROBLEM): Current view at image export: pre-selection empty

Component _exports/Mesh (STL/ZJV/3DS MAX/VRML/Collada...)

  • Issue #35583 (ENHANCEMENT): Rename Google SketchUp to Trimble SketchUp
  • Issue #61961 (PROBLEM): PARTJAVA export doesn't work
  • Issue #63755 (PROBLEM): In V11, when converting from MESH to PARTJAVA_REDUCED, STL is used as intermediate format instead of PARTJAVA
  • Issue #64365 (PROBLEM): Generic Assembly(Quick & Simple): Partcolor is missing after export
  • Issue #65201 (PROBLEM): PartJava: integer overflow in double rounding operation while writing points
  • Issue #65367 (PROBLEM): ZJV: Real Flat
  • Issue #65615 (PROBLEM): Error in exploded view in WebGL viewer
  • Issue #65801 (PROBLEM): Crash when ZJV export path is not writable
  • Issue #66261 (PROBLEM): Sketchup (Collada) import creates wrong geometry
  • Issue #66561 (PROBLEM): 3MF format cant be opened after export
  • Issue #66593 (ENHANCEMENT): Update open mesh to current version 5.0
  • Issue #73885 (ENHANCEMENT): Use Webcomponent for WebGL export format
  • Issue #74337 (PROBLEM): WebGL viewer bug
  • Issue #74821 (PROBLEM): Custom dimensions in ZJV missing Lines for angle Dimensions
  • Issue #77061 (ENHANCEMENT): When exporting zjv from open mesh, compute round and hard edges
  • Issue #79451 (PROBLEM): Defect Boundary Edges are exported to ZJV

Component _exports/Meta (PS2/PS3)

  • Issue #48003 (ENHANCEMENT): Thread lines are missing in 2D view (drop old V8 PS3 cosmetic thread information)
  • Issue #59125 (ENHANCEMENT): Rework meta data structure to reduce memory and increase performance

Component _exports/Neutral-2D (DXF/DWG/...)

  • Issue #63465 (PROBLEM): DXF/DWG default output for layer like 9.08
  • Issue #65975 (PROBLEM): OpenDWG DWG exporter: The pattern of patterned lines is not visible in small drawings
  • Issue #68975 (PROBLEM): OpenDWG: Update creation of radial dimensions to new input data
  • Issue #72465 (ENHANCEMENT): Automatic dimensions - wrong alignment on requested 2d files
  • Issue #80069 (ENHANCEMENT): DXF DWG Export LayerSettings ifdwgdirect.cfg are not working

Component _exports/Neutral-3D (SAT/STEP/IGES/ParaSolid/...)

  • Issue #57109 (PROBLEM): Update to Parasolid 28.X and new Translator Core to fix "Error #22 foe file read error"
  • Issue #57199 (ENHANCEMENT): STL to STEP conversion
  • Issue #59005 (PROBLEM): Distance of parallel planes found twice
  • Issue #60097 (ENHANCEMENT): Update to Parasolid 29.0 for V11
  • Issue #60229 (PROBLEM): Incorrect height of cylinders in Capvidia
  • Issue #62015 (ENHANCEMENT): Q&S - pack STEP input 1:1
  • Issue #62383 (PROBLEM): Typo in STEP import options
  • Issue #63589 (ENHANCEMENT): Split extrusions containing of several connected components into separate features (Capvidia translator)
  • Issue #63761 (ENHANCEMENT): Do not export empty parts of step file in capvidia translator
  • Issue #64305 (ENHANCEMENT): Wrong translation in "Import options for format STEP file input" window
  • Issue #64477 (PROBLEM): JT does not support all surface color information
  • Issue #64483 (ENHANCEMENT): DIN 4003 STEP Checker
  • Issue #64611 (ENHANCEMENT): Allow Mesh import for DWG/DXF/DGN important for BIM Data
  • Issue #66525 (PROBLEM): Load Capvidia options before opening file
  • Issue #68007 (ENHANCEMENT): Option Sew-Sheets and Convert Solid exclude each other at the moment
  • Issue #68481 (PROBLEM): Q&S: Check possible unit problem
  • Issue #72113 (PROBLEM): Jt Mesh: Length unit is not set
  • Issue #72341 (PROBLEM): Incorrect sweep angle for cone in flange
  • Issue #72905 (ENHANCEMENT): Q&S imported and converted into step project doesn't look like original step file
  • Issue #73023 (ENHANCEMENT): Improve handling of unknown features
  • Issue #77179 (ENHANCEMENT): Update to Parasolid 29.0 for V11 needs installer update
  • Issue #77915 (PROBLEM): Rename Acis SAT/STEP/IGES export format to avoid collision/wrong error reports/invalid output
  • Issue #78087 (PROBLEM): Incorrect sizes of INCH parts exported with Capvidia
  • Issue #78511 (PROBLEM): Error when exporting to DXF 3D and DXF Binary 3D using ACIS license

Component _exports/PDF (PDF/U3D/DataSheet/...)

  • Issue #65671 (ENHANCEMENT): PARTtemplateDesigner: Add Line settings to 2D Technical view
  • Issue #65741 (ENHANCEMENT): PARTtemplateDesigner: more options for table content (NN, NT) should be possible
  • Issue #75013 (PROBLEM): PDF-PARTtemplateDesigner: Item not clickable anymore
  • Issue #75687 (ENHANCEMENT): Check if initial orientation of PDF 3D and Maxwell could be altered
  • Issue #78045 (ENHANCEMENT): Blurry 2d view on PDFdatesheet (.pra file view)
  • Issue #78189 (ENHANCEMENT): Make links translatable within 3D PDF Datasheet
  • Issue #78281 (PROBLEM): PDF-PARTtemplateDesigner Condition gets missing after reselect item
  • Issue #80601 (ENHANCEMENT): Allow PDF Datasheet for 2D and NoCAD Projects

Component _exports/Render (Maxwell Render/POVray)

  • Issue #43671 (PROBLEM): Too big export window for AVI format
  • Issue #76885 (PROBLEM): Maxwell render previews: Too many renderer starting and adding wrong file (MXS)
  • Issue #83319 (PROBLEM): HelixCut - offset in each loop

Component _installer/Client-Server

  • Issue #64959 (ENHANCEMENT): Installer: Improve check of NX base Path on installation
  • Issue #67993 (ENHANCEMENT): PSOL server installation: wrong version in dialog name
  • Issue #82009 (ENHANCEMENT): Add class20.cip to installation

Component _installer/Packages

  • Issue #63155 (ENHANCEMENT): Inventor 2011: Remove installer
  • Issue #63173 (ENHANCEMENT): Inventor: Adjust installation process to DLL which has not to be registered
  • Issue #63955 (ENHANCEMENT): Installer : Teamcenter
  • Issue #64429 (ENHANCEMENT): Add analysis related files to installation
  • Issue #65287 (ENHANCEMENT): INSTALLER : PdmProxies (#59133 + # 62279)
  • Issue #66061 (ENHANCEMENT): INSTALLER : Windchill ISSUE (65011)
  • Issue #66303 (ENHANCEMENT): INSTALLER : PDM : Teamcenter
  • Issue #66377 (ENHANCEMENT): Check and create msi removal tool
  • Issue #66845 (ENHANCEMENT): INSTALLER : PDM : Common
  • Issue #69647 (ENHANCEMENT): INSTALLER : PdmProxies (ISSUE 48679)
  • Issue #72779 (ENHANCEMENT): Remove part2cad license from install clean
  • Issue #73253 (ENHANCEMENT): remove alternatetoolbar.cfg from installation
  • Issue #74015 (ENHANCEMENT): remove windowsettings_large3d.cfg
  • Issue #74231 (ENHANCEMENT): Tool for registering CAD interfaces
  • Issue #74515 (ENHANCEMENT): preplace.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #75543 (PROBLEM): Files, folders and shortcuts remain after uninstallation
  • Issue #75743 (ENHANCEMENT): INSTALLER : PDM (ISSUE #72477 - merge #75229 to V11)
  • Issue #77451 (ENHANCEMENT): Installer SCript Creo and NX
  • Issue #79033 (ENHANCEMENT): INSTALLER : PDM (ISSUE #72221)
  • Issue #82423 (ENHANCEMENT): Offline DVD installer for ArchiCAD "online" interface
  • Issue #82801 (ENHANCEMENT): INSTALLER : PDM (ISSUE #71565)
  • Issue #84355 (ENHANCEMENT): Remove npwebviewerplugins from installer ISO/archives

Component _installer/Single-User

  • Issue #35823 (ENHANCEMENT): increase size of PLMTABLE2.XVARSET
  • Issue #66945 (PROBLEM): When you want to add catalogs in the install phase the selection is not visible
  • Issue #68021 (PROBLEM): pn_standards should be removed/replaced in PSOL installation
  • Issue #68113 (ENHANCEMENT): psol_workstation.exe is not signed/Publisher: Unknown
  • Issue #71455 (PROBLEM): The new progress bar for PSol install looks weird
  • Issue #74723 (PROBLEM): Install button should be removed from PSOL v11 CD Starter iso
  • Issue #74749 (PROBLEM): Inventor 2016 iface in the wrong place in CAD selections

Component _license/Licensemanager

  • Issue #66641 (PROBLEM): Strange behavior at assignment of named license user

Component CAD / All / CADPROXIES

  • Issue #59135 (ENHANCEMENT): CADProxies: In connection with PDM interface two times error message
  • Issue #59503 (ENHANCEMENT): CadProxies: set error message if NativeUpload code raises error
  • Issue #61155 (ENHANCEMENT): Proxies: CadStartHelper gets a GetInstance method
  • Issue #61209 (ENHANCEMENT): CAD: html escaping of error messages
  • Issue #62189 (ENHANCEMENT): Core: Port Old Placement Dialog To New Proxy Based Placement Dialog
  • Issue #62191 (ENHANCEMENT): Catia: Support Of DesignTables
  • Issue #62247 (ENHANCEMENT): CadProxies: Migrate CadStartHelper -> CadManager
  • Issue #62423 (PROBLEM): PSolCadManager: Full Test and Verification
  • Issue #62857 (PROBLEM): CadProxies: Change mzComPtrT to ProxyPtrT
  • Issue #64269 (ENHANCEMENT): Proxies: Refactor Object Factory To Scripting Root Dependence
  • Issue #64331 (ENHANCEMENT): Use Cad-Proxy in translator line to export stl/step/... files
  • Issue #65331 (ENHANCEMENT): CadProxies: GetAttributesFiltered, Add Filter Option For "AtLeastOneOfTheFlags" -> e.g. Get Attributes which are Dimensions join Attributes which are Parameters
  • Issue #65333 (ENHANCEMENT): CadProxies: NativeCheckin: Performance Improvement: Only Retrieve Attributes Once From ModelRepresentation
  • Issue #65643 (ENHANCEMENT): UGNX: Implement CadScriptingRoot.onOpenDocument(fileName, params)
  • Issue #65645 (ENHANCEMENT): Inventor: Implement CadScriptingRoot.onOpenDocument(fileName, params)
  • Issue #65647 (ENHANCEMENT): SolidEdge: Implement CadScriptingRoot.onOpenDocument(fileName, params)
  • Issue #65649 (ENHANCEMENT): SolidWorks: Implement CadScriptingRoot.onOpenDocument(fileName, params)
  • Issue #65731 (ENHANCEMENT): CadProxies: Support Of Embedded Components During NativeCheckin
  • Issue #66285 (ENHANCEMENT): Catia: Support Of Embedded Documents
  • Issue #66417 (ENHANCEMENT): Creo: NativeCheckin for UDFs with Standard Workflow.
  • Issue #66419 (ENHANCEMENT): Creo: NativeCheckout for UDFs
  • Issue #66533 (ENHANCEMENT): CadProxies: Generic ExecutePlacementStrategyCommand
  • Issue #66569 (PROBLEM): CadProxies: OSDM Physical Property Values Incorrect
  • Issue #66575 (ENHANCEMENT): Cad Proxies: Creo: Density Attribute Is Not Returned
  • Issue #66603 (PROBLEM): PARTcloud: Problem collection
  • Issue #67273 (PROBLEM): PLMsynchro FSO with NX - batch import fails
  • Issue #68533 (PROBLEM): PLM sync/CATIA: Uncaught exception when converting a product with missing part
  • Issue #68543 (ENHANCEMENT): Proxies: Missing Feature Status -> We have regenerated but not unregenerated
  • Issue #68829 (ENHANCEMENT): Cad Proxies: Add Function To Find All Instances Of A ModelRepresentation In An Assembly
  • Issue #68883 (PROBLEM): PDM: Error message from PDM is wrapped in another exception
  • Issue #71479 (ENHANCEMENT): Create cadProxy for CapVidia Prototype
  • Issue #71877 (ENHANCEMENT): Create cadProxy for CapVidia Complete
  • Issue #72081 (ENHANCEMENT): Show Message instead of exception, when PARTdataManager can't be started
  • Issue #72733 (PROBLEM): PLm sync/CATIA: File name of component is invalid
  • Issue #73203 (ENHANCEMENT): Update Capvidia SDK to version 3.5
  • Issue #73219 (ENHANCEMENT): CAD Proxies: Add GetCombinedAttributes
  • Issue #73237 (ENHANCEMENT): CAD Proxies: Use GetCombinedAttributes
  • Issue #73981 (ENHANCEMENT): Catia: Speed Improvements In Cad Attribute Proxies
  • Issue #73999 (ENHANCEMENT): Add a dictionary parameter to the CAD Proxy AddAttribute function
  • Issue #74215 (ENHANCEMENT): Common: AddHooking System in CadProxy EventManager to allow execution of Custom Code while activating or deactivating events
  • Issue #74841 (ENHANCEMENT): Cad Proxies: Add Entry Point To Close All Opened Documents
  • Issue #74931 (PROBLEM): PLM sync/all: Fix conversion when retrying after CAD crash
  • Issue #75279 (ENHANCEMENT): Testing: Verify CAD proxies Test Scripts and Port To Automatic Testing Environment
  • Issue #75387 (ENHANCEMENT): CadProxies: API docs
  • Issue #75759 (PROBLEM): Proxies Common: Inconsistent Replace Behaviour If Component Of Pattern Is Selected
  • Issue #75839 (PROBLEM): SW insert repeatedly does not work for native parts
  • Issue #75905 (ENHANCEMENT): CadProxies: Create Entry Point To Display A Model Representation In A Cad Window
  • Issue #76263 (PROBLEM): EPDM - IsNAT support with SWX-Configurations
  • Issue #76985 (ENHANCEMENT): CadManager: Enhancements For Multithreaded CAD Access
  • Issue #77031 (ENHANCEMENT): PLMsnyc/all: Add multi-process CAD Access
  • Issue #77187 (ENHANCEMENT): Catia: Create Preselection and Interactive Selection Algorithm for Catia
  • Issue #78141 (PROBLEM): Replace Workflow allows replacement in PSOL-ASM´s
  • Issue #78147 (PROBLEM): Solidedge Cad Proxy can not work with special attribute
  • Issue #78455 (ENHANCEMENT): Allow Mesh info on selected face
  • Issue #78679 (PROBLEM): PLMsynchro - incomplete creo assembly is not imported
  • Issue #79901 (ENHANCEMENT): PLM sync/all: Don't copy source files again when doing a following conversion
  • Issue #80055 (PROBLEM): GetPath Method is very slow on SE cadProxy
  • Issue #80385 (ENHANCEMENT): PLM sync/all: Add clear error message when conversion times out
  • Issue #80891 (PROBLEM): Proxies: setStoredSelections & GetStoredSelections aren't dependent of ScriptngRoot context
  • Issue #81259 (PROBLEM): CadProxies: UserApp added to wrong context
  • Issue #81809 (PROBLEM): CadMgr: Restart of some CADs doesn't work
  • Issue #82365 (ENHANCEMENT): CadProxies: Add Implementation for Different Attribute Types In CadObject.GetAttributes
  • Issue #82679 (ENHANCEMENT): Common: Add Entry Point for filtered attribute retrieval
  • Issue #83443 (ENHANCEMENT): Common Proxies: Create Universal Proxy To Raise Process Main Window
  • Issue #83901 (PROBLEM): CadProxies: Replace *etComponentPath by *etComponentPathList everywhere
  • Issue #84005 (ENHANCEMENT): CadProxies: New AttributeClass constant for Family attribute creation
  • Issue #84185 (ENHANCEMENT): CadProxies: Test For AddAttribute Implementations

Component CAD / All / CAPVIDIA

  • Issue #81289 (PROBLEM): Translator line path from NAT_CAPVIDIA_STP to PARTJAVA_REDUCED uses STL as intermediate format instead of PARTJAVA

Component CAD / All / Common

  • Issue #24800 (ENHANCEMENT): On Replacement of parts keep mates for the new part
  • Issue #32323 (ENHANCEMENT): Add alpha channel to ps3 for transparency support
  • Issue #37881 (PROBLEM): CadContext does not work because of TLS and thread change in CAD
  • Issue #39353 (PROBLEM): Closing CAD system while an error message is open leads to an unclean termination
  • Issue #39825 (ENHANCEMENT): Add ZJV to PS3 for preview in placement dialog
  • Issue #43019 (ENHANCEMENT): CAD Toolbar Tooltips should be adjusted that user is good informed (Seamless)
  • Issue #43021 (ENHANCEMENT): CAD Toolbar Tooltips should be adjusted that user is better informed (Replace)
  • Issue #43025 (ENHANCEMENT): CAD Toolbar Tooltips should be adjusted that user is better informed (Geometric Search)
  • Issue #43027 (ENHANCEMENT): CAD Toolbar Tooltips should be adjusted that user is better informed (Insert Connection)
  • Issue #43029 (ENHANCEMENT): CAD Toolbar Tooltips should be adjusted that user is better informed (Settings)
  • Issue #43101 (ENHANCEMENT): CAD Toolbar Tooltips should be adjusted that user is better informed (Master)
  • Issue #50735 (ENHANCEMENT): PdmProxies: add query that only returns CNSUIDS
  • Issue #56373 (ENHANCEMENT): Make VB SCripts Translator MT safe
  • Issue #58063 (ENHANCEMENT): PARTcloud - maybe to add about window with version number etc.
  • Issue #58737 (ENHANCEMENT): Collection Issue for 10.1 CAD Proxies Extensions
  • Issue #59555 (PROBLEM): PARTcloud generating parts name uploading directory for Solidworks
  • Issue #59573 (ENHANCEMENT): Placement dialog enhancement: Add a new button for "Place and close (dialog)"
  • Issue #59575 (ENHANCEMENT): Placement dialog enhancement: Add option to disable pictures (3D and/or 2D)
  • Issue #59579 (ENHANCEMENT): Placement dialog enhancement: Save dialog position or define position per CFG
  • Issue #60277 (ENHANCEMENT): Export CUSTOMDimensions V10
  • Issue #60411 (ENHANCEMENT): Interface startup time too long
  • Issue #60881 (ENHANCEMENT): Common: Placement Dialog: Preview Images In PNG
  • Issue #61441 (ENHANCEMENT): IFC generator based on direct MESH
  • Issue #61553 (ENHANCEMENT): Native Checkout -> Open and Family select only no geometry generation. Implement as full cad proxy solution
  • Issue #62813 (ENHANCEMENT): Some interface translation updates for insert parts
  • Issue #63737 (ENHANCEMENT): PARTcloud: Insert directly in CAD
  • Issue #64019 (ENHANCEMENT): Need a part with a special position matrix
  • Issue #64161 (ENHANCEMENT): PLMsync: Ignore new geometry attributes
  • Issue #64275 (ENHANCEMENT): PARTcloud Uploader: Add option to upload a specific file
  • Issue #64661 (ENHANCEMENT): Create proxy object wrapper with delayed loading
  • Issue #64679 (ENHANCEMENT): PARTcloud allow native file attachment while upload
  • Issue #64709 (ENHANCEMENT): PARTcloud - Small error in English translation of dialog when there is a server error
  • Issue #64711 (ENHANCEMENT): PARTcloud - Small error in English translation of dialog when file is not saved
  • Issue #64717 (ENHANCEMENT): PARTcloud - when no directory is defined, error message should be replaced by warning dialog
  • Issue #64719 (ENHANCEMENT): Small error in English translation of dialog when there is an upload error
  • Issue #65199 (ENHANCEMENT): PARTcloud: Translate licenses/categories
  • Issue #65405 (PROBLEM): PARTcloud: Prevent multiple windows from popping up
  • Issue #65749 (ENHANCEMENT): PARTcloud: Allow setting description/license/category on a per file basis
  • Issue #65849 (PROBLEM): "Search for unmachined parts" and "Geosearch" does not switch to PARTdataManager if app is in the background
  • Issue #66189 (ENHANCEMENT): Workflow Component to handle cad processing (improve CAD progress dialogs, messages and exceptions)
  • Issue #66235 (ENHANCEMENT): Create Test framework for the creation of CAD specific tests
  • Issue #66317 (ENHANCEMENT): Disable Display Creation Warnings
  • Issue #66675 (PROBLEM): MetaApi: Hole Detector forgets Countersunk Angles
  • Issue #67121 (ENHANCEMENT): Create GDL output Format (Static)
  • Issue #67123 (ENHANCEMENT): Create GDL Output Format (Parametric)
  • Issue #67225 (ENHANCEMENT): Eval NX MCD API for IFACE and PSOL (Mechanical simulation)
  • Issue #68241 (ENHANCEMENT): Rework DWG 3D to use Alternate Geometry for output
  • Issue #68337 (ENHANCEMENT): Update CFG to new config syntax
  • Issue #69107 (ENHANCEMENT): Allow Double Side extrude as input for M3DPARAM Format
  • Issue #69699 (ENHANCEMENT): SAT / STEP quick & Simple import
  • Issue #72205 (ENHANCEMENT): Merge API Proxy updates to V11
  • Issue #72223 (ENHANCEMENT): Adjust GetFileExtension due to Forming Tool Parts and Feature Library Parts
  • Issue #72409 (ENHANCEMENT): API for IFACE and PSOL (Mechanical simulation)
  • Issue #72513 (PROBLEM): Replace hung in endless loop
  • Issue #72785 (ENHANCEMENT): ifacecommon.cfg - AppBeforeCreate and AppAfterCreate keys should be improved
  • Issue #73037 (ENHANCEMENT): Allow Export Options instead of using Version string in PARTAPI
  • Issue #73055 (ENHANCEMENT): POC: Trigger Meta3dvs export by script & cad proxies for Revit, Creo
  • Issue #73221 (ENHANCEMENT): Pass-through the attributes of the definition to the representation
  • Issue #73445 (ENHANCEMENT): Wrong login data should not be saved in PDM login dialog
  • Issue #73487 (ENHANCEMENT): Move Translation from cadmenu.vbs to ifacecommon.def
  • Issue #73495 (ENHANCEMENT): Add Embeded/Virtual Flag to native checkin data
  • Issue #74147 (ENHANCEMENT): Implement counter function for parts
  • Issue #74189 (ENHANCEMENT): ifacad.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74205 (ENHANCEMENT): ifacecommon.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74207 (ENHANCEMENT): ifaceofflinetest.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74225 (ENHANCEMENT): Create Parametric Engine for Creo -> Review
  • Issue #74235 (ENHANCEMENT): ifadeskinv.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74271 (ENHANCEMENT): ifcnsteamcenter.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74281 (ENHANCEMENT): option place session/place new for Microstation only work with session
  • Issue #74291 (ENHANCEMENT): ifinvteamcenter.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74299 (PROBLEM): PARTcloud: model_id was changed from string to int
  • Issue #74307 (ENHANCEMENT): ifnxteamcenter.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74325 (ENHANCEMENT): ifosdm.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74339 (ENHANCEMENT): ifosdmwwgm.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74345 (ENHANCEMENT): ifproepdmlink.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74373 (ENHANCEMENT): ifproeteamcenter.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74383 (ENHANCEMENT): ifrevit.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74389 (ENHANCEMENT): ifseteamcenter.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74393 (ENHANCEMENT): ifsolidedge.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74395 (ENHANCEMENT): ifsolidworks.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74403 (ENHANCEMENT): ifugnx.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74409 (PROBLEM): Wrong export with parametric, rotation extrude
  • Issue #74473 (ENHANCEMENT): PdmLoginService.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74489 (ENHANCEMENT): pdmProxies.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74547 (ENHANCEMENT): teamcentercoreiface.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #74877 (PROBLEM): CadManager: StartCadInstance fails if more than one argument in cmd line
  • Issue #75251 (ENHANCEMENT): create geometrical variant -> add API
  • Issue #75253 (ENHANCEMENT): create geometrical variant -> prototype for Pro-E
  • Issue #75751 (PROBLEM): Solid Edge ST7 - Cancel to insert screw into pattern not working
  • Issue #75791 (ENHANCEMENT): C3D Translator
  • Issue #76247 (PROBLEM): PARTcloud.net: one CAD process running, two or more active CAD entries available
  • Issue #76287 (ENHANCEMENT): allow the option "keep part in PARTdataManager" while replace
  • Issue #76301 (ENHANCEMENT): Replace part in assembly
  • Issue #76419 (ENHANCEMENT): PARTcloud - include components option rewrites collection name
  • Issue #76521 (PROBLEM): CAD - Replace error when nothing is selected
  • Issue #76675 (ENHANCEMENT): Create new UI for Common CAD Dialogs
  • Issue #76967 (PROBLEM): Parallel usage Inventor 2017 and AutoCAD 2017
  • Issue #77039 (ENHANCEMENT): Allplan general Interface
  • Issue #77291 (ENHANCEMENT): Check if Selection of faces for partial search is possible direct in cad instead of seamless or partdatamanager
  • Issue #77307 (ENHANCEMENT): PLMsync: Make the query object serializable
  • Issue #77401 (ENHANCEMENT): Change test to new cad framework tests
  • Issue #77425 (ENHANCEMENT): PARTcloud uploader handle & characters in URLs
  • Issue #77757 (ENHANCEMENT): TEST: Create Test For Cad Geometry Proxy Units
  • Issue #77973 (ENHANCEMENT): Enhance attribute Mapping in CAD config (ifrevit.cfg -> mapping of classification names / attributes to RFA export)
  • Issue #78023 (PROBLEM): CAPVIDIA STP Import fail
  • Issue #78167 (ENHANCEMENT): Change category [RAWMATERIALS] in ifacecommon to mapping
  • Issue #78259 (ENHANCEMENT): PLMsynchro Capvidia - Test topology search and appearance on small parts
  • Issue #78473 (ENHANCEMENT): Feature based partial search from CAD integration
  • Issue #78553 (ENHANCEMENT): Export performance enhancement
  • Issue #78813 (ENHANCEMENT): Change category [nosection] in ifacecommon to mapping
  • Issue #79197 (ENHANCEMENT): Make CFG reader for menu data more stable
  • Issue #79537 (ENHANCEMENT): Placement dialog: Why showing ALL connection points?
  • Issue #79599 (ENHANCEMENT): Enhance Geo Search Menu
  • Issue #79761 (PROBLEM): MATMAP materials with brackets / parenthesis ()
  • Issue #79789 (PROBLEM): Settings button from CAD interface doesn't lead to CAD settings in PARTadmin
  • Issue #80135 (PROBLEM): COM Api can´t stopt/start multiple times
  • Issue #80451 (ENHANCEMENT): Make replacement mode selectable via VB code
  • Issue #80499 (ENHANCEMENT): Purge Offline interfaces
  • Issue #80537 (ENHANCEMENT): Export MAXWELL Environment Setting V3 changes and Optics Camera Settings
  • Issue #80655 (ENHANCEMENT): Add Possibility for Callback Object in Placement Manager Dialog
  • Issue #80853 (PROBLEM): Common: Add Possibility To Hide GenericProxyTranslator Entries In Gui (cfg)
  • Issue #80859 (ENHANCEMENT): Move asm2part codeing into dllhost
  • Issue #81265 (ENHANCEMENT): Cad Generation Server App-Server/Service Module. Cad Proxy changes
  • Issue #81267 (ENHANCEMENT): Cad generation Server -> Server Side
  • Issue #82683 (ENHANCEMENT): LiveSearch should be configurable with timer
  • Issue #83707 (ENHANCEMENT): Enhance CAD Selection test
  • Issue #83923 (ENHANCEMENT): Test: CadDocument Test Enhancement
  • Issue #84213 (ENHANCEMENT): remove PARTcloud from local ifaces
  • Issue #84247 (ENHANCEMENT): Test with Q&S Bad Quality File
  • Issue #84325 (PROBLEM): Command Choice Dialog has no Cancel button

Component CAD / All / Installation

  • Issue #63541 (ENHANCEMENT): Installer: Vault: Port interface to .NET api
  • Issue #63543 (ENHANCEMENT): Installer: Vault: Port pdmproxy to .NET api
  • Issue #68689 (PROBLEM): Installer: WWGM: Download fails for versions newer than WC10.2 M20
  • Issue #73265 (ENHANCEMENT): Installer: WWGM add support for Windchill 11
  • Issue #73273 (ENHANCEMENT): Installer: Create ifpdm Module for Catia V6 Enovia
  • Issue #74277 (ENHANCEMENT): Revit Installer Update
  • Issue #74507 (ENHANCEMENT): Revit 2017 Interface Installer Update
  • Issue #75765 (ENHANCEMENT): App Core Capvidia DLL´s to PSOL install
  • Issue #75893 (ENHANCEMENT): Installer: App Core Capvidia DLL´s to PSOL install
  • Issue #77711 (ENHANCEMENT): Remove from Installer
  • Issue #79899 (ENHANCEMENT): WWGM: Integration crashes WWGM on startup (WC11 M010+)

Component CAD / All / PART2CAD

  • Issue #36305 (ENHANCEMENT): CATIA Macro v5 - Name of the CATscript
  • Issue #51833 (PROBLEM): Part2CAD Inventor 2015 "open directory after export" check option opens nothing
  • Issue #54311 (PROBLEM): Creo 3.0 missing when using part2Cad
  • Issue #61781 (PROBLEM): PART2cad: Creo direct modeling notification error message when CAD is not opened
  • Issue #75545 (ENHANCEMENT): Part2Cad: Improve Detection Of Running Creo or Pro/E

Component CAD / All / Seamless

  • Issue #33609 (ENHANCEMENT): Seamless geosearch only takes the complete assembly, PcadAssistant could also take the marked part
  • Issue #34197 (ENHANCEMENT): Wrong icons in seamless for doc scan and history
  • Issue #39451 (PROBLEM): ERP bitmaps missing in seamless
  • Issue #43041 (ENHANCEMENT): Rework 2D derivation windows in seamless
  • Issue #65379 (ENHANCEMENT): Cant scroll the view tab in seamless with mouse wheel
  • Issue #66933 (PROBLEM): "Add to favorites" available even if you don't have license
  • Issue #67001 (PROBLEM): Seamless 2D derivation license problem
  • Issue #67027 (PROBLEM): "Part comparison" options available in context menu even you don't have license
  • Issue #67199 (PROBLEM): StartGeoSearch opens secondary Seamless Window in Creo
  • Issue #72187 (PROBLEM): Seamless crashes if you open a project second time
  • Issue #73555 (ENHANCEMENT): UI for geosearch on the fly
  • Issue #73971 (ENHANCEMENT): seamless.cfg should be improved for better usability in PARTconfig Editor V2
  • Issue #76719 (ENHANCEMENT): Message in 2D derivation tab could be improved
  • Issue #77639 (ENHANCEMENT): Seamless - layout issues when resizing docked Seamless in SW2014
  • Issue #77763 (ENHANCEMENT): Seamless 2d Derivation view problems
  • Issue #77895 (PROBLEM): Comparing a geo search result with a part from a native catalog does not work
  • Issue #79357 (ENHANCEMENT): LiveSearch interface activation window layout
  • Issue #79519 (PROBLEM): 2D derivation views can be opened more than once
  • Issue #79811 (ENHANCEMENT): Same taskbar icon for Seamles and PARTdataManager in V11
  • Issue #81523 (PROBLEM): Fix icon drawing in seamless
  • Issue #82685 (ENHANCEMENT): "Show in Keytech" button in Seamless
  • Issue #82957 (PROBLEM): LiveSearch, "Transfer to CAD" fatal error for DIN5419
  • Issue #83047 (PROBLEM): Livesearch - when SE closed with LiveSearch open, Seamless crashes
  • Issue #83093 (PROBLEM): LiveSearch, SolidEdge, "Transfer to CAD" fails
  • Issue #83649 (ENHANCEMENT): Partial search, results different when search triggered from CAD and from Seamless
  • Issue #83843 (PROBLEM): Partial search, 3Dview bar not usable if geometry is "behind"

Component CAD / ARCHICAD / GDL

  • Issue #71329 (ENHANCEMENT): GDL static format enhancements
  • Issue #72539 (ENHANCEMENT): Create real Archicad Interface
  • Issue #75185 (ENHANCEMENT): Possibility to change the length of semi-finished parts in Archicad
  • Issue #75811 (ENHANCEMENT): archicad online interface
  • Issue #77149 (ENHANCEMENT): ArchiCAD 20 interface / plugin
  • Issue #77405 (ENHANCEMENT): ArchiCAD replace rotation ignored
  • Issue #78501 (ENHANCEMENT): ArchiCAD classification (incl. test cases)
  • Issue #79247 (ENHANCEMENT): ArchiCAD Parametric export
  • Issue #79249 (ENHANCEMENT): check ArchiCAD status while / before exporting
  • Issue #82379 (ENHANCEMENT): parametric option to be disabled
  • Issue #82819 (ENHANCEMENT): Add alpha channel to ps3 for transparency support

Component CAD / Autocad 2d / Install

  • Issue #77709 (ENHANCEMENT): Autocad Mechanical 2017 Installer

Component CAD / Autocad 2d / Interface

  • Issue #53985 (ENHANCEMENT): AutoCAD: LineType Scale based on BoundingBox
  • Issue #54767 (ENHANCEMENT): AutoCAD: Create simple drag&drop functionality for seamless
  • Issue #57991 (ENHANCEMENT): When a part is selected I get a message no component selected in AutoCad 2015
  • Issue #61753 (ENHANCEMENT): AutoCAD: Proxy based NativeCheckout
  • Issue #62137 (PROBLEM): AutoCad: No version string in transfer to CAD button
  • Issue #62375 (PROBLEM): Cant export in 2 different sheets from AutoCAD
  • Issue #62881 (ENHANCEMENT): Autocad Plant 3d Piping API Prototype
  • Issue #65981 (PROBLEM): AutoCad is blocked after 3D export when there was no active document previously
  • Issue #66269 (ENHANCEMENT): AutoCAD: Support Of Embedded Documents
  • Issue #68957 (PROBLEM): AutoCad: Update creation of radial dimensions to new input data
  • Issue #71617 (ENHANCEMENT): AutoCad: Implement CadScriptingRoot.OpenDocument(fileName, params)
  • Issue #73275 (ENHANCEMENT): Autocad Mechanical 2017
  • Issue #73849 (PROBLEM): AutoCad: Known target position from PartConnection is not used
  • Issue #76421 (ENHANCEMENT): AutoCAD should not support new replace features
  • Issue #76539 (ENHANCEMENT): Scaling dimensions in AutoCAD
  • Issue #76609 (PROBLEM): Quick & Simple projects are 1000 times smaller when exported in AutoCAD
  • Issue #77035 (ENHANCEMENT): Autocad OpenDWG analyse
  • Issue #77113 (PROBLEM): DWG Export: Solid Lines per default on layer AM_4, AM_0 is correct
  • Issue #80591 (PROBLEM): AutoCad: 3D export does not work in AutoCad 2016
  • Issue #82437 (PROBLEM): Check open DWG/DXF additional block
  • Issue #82665 (ENHANCEMENT): AutoCAD: Add Entry Point for filtered attribute retrieval
  • Issue #83405 (ENHANCEMENT): Autocad should not have partial search
  • Issue #83411 (ENHANCEMENT): Test integration on Autocad Advance Steel

Component CAD / Catia V5 / Interface

  • Issue #56209 (PROBLEM): Feature Patterns with Rotation Center Points are not supported
  • Issue #65589 (PROBLEM): Catia allows to export into our assembly
  • Issue #73797 (ENHANCEMENT): CAD proxy/CATIA: Export a STEP214 instead of a STEP203 file
  • Issue #76483 (ENHANCEMENT): CATIA - CAD not in foreground when exporting to it
  • Issue #80957 (ENHANCEMENT): Catia interface auto connect is OFF by default
  • Issue #83449 (ENHANCEMENT): CATIA: Implement CatiaWindow::Raise

Component CAD / Catia V5 / Macro

  • Issue #71403 (ENHANCEMENT): Add Blend Feature to Catia Macro
  • Issue #75695 (PROBLEM): CatScript V5: There seems to be an issue with patterns of drafted extrusions

Component CAD / Catia V6 / Interface

  • Issue #22353 (ENHANCEMENT): Create CATIA V6 Macro Output for PARTsolutions

Component CAD / IFC-CAD / Format

  • Issue #60857 (ENHANCEMENT): Improve geometry results in established BIM viewers
  • Issue #67103 (ENHANCEMENT): IFC units are wrong on MESH output
  • Issue #68231 (ENHANCEMENT): Add Classification data on Meta-Mesh output for IFC Update

Component CAD / Inventor / Interface

  • Issue #59167 (ENHANCEMENT): CADProxies: in connection with PDM interface, two times error message
  • Issue #59273 (ENHANCEMENT): CNSE15: We need the possibility to define iMates also in planes and surfaces
  • Issue #59587 (ENHANCEMENT): Possibility to start replace from right mouse in cad Proof of Concept
  • Issue #59801 (ENHANCEMENT): Transfer to CAD (Inventor) dialog in PARTdataManager
  • Issue #60209 (PROBLEM): INVENTOR: imperial threads are not shown correctly
  • Issue #60483 (PROBLEM): Inventor pattern insert functionality, Cancel & No buttons work the same
  • Issue #60619 (ENHANCEMENT): Inventor hangs when restarting seamless after killing the pseamless.exe
  • Issue #61087 (PROBLEM): Error by starting PARTsolutions from Inventor 2016
  • Issue #61741 (ENHANCEMENT): Inventor: Proxy Based NativeCheckout
  • Issue #62181 (ENHANCEMENT): Inventor: Port Old Placement Dialog to Proxy Based Placement Dialog
  • Issue #62355 (ENHANCEMENT): Inventor: Adequate error message if InventorMaterialLibrary.adsklib has been deleted or damaged.
  • Issue #62693 (ENHANCEMENT): Inventor: Load plugin without registration
  • Issue #62695 (PROBLEM): Inventor: Loading these PS3 files takes a long time
  • Issue #62793 (PROBLEM): Inventor: Flexible flag will not be set on replace
  • Issue #62911 (PROBLEM): Inventor: Thread will not be created when its length exceeds the physical border
  • Issue #62937 (PROBLEM): Inventor 2016 - Export aborted
  • Issue #63309 (ENHANCEMENT): Inventor: Integration of Geometry Proxy API
  • Issue #63337 (ENHANCEMENT): Inventor: "There is no document to display" error when exporting a drawing
  • Issue #63377 (PROBLEM): Inventor 10.1 Proxies: Generic flag and Pending flag
  • Issue #64051 (PROBLEM): Inventor Seamless button could not bring Seamless in foreground if it is already opened
  • Issue #64617 (PROBLEM): INVENTOR: placement manager does not tun off
  • Issue #65299 (PROBLEM): Writing attributes does not work in Inventor
  • Issue #66267 (ENHANCEMENT): Inventor: Support Of Embedded Documents
  • Issue #67045 (ENHANCEMENT): Prototype geosearch on the Fly for Inventor
  • Issue #67047 (ENHANCEMENT): Prototype Concept for "Screw in Hole" Inventor
  • Issue #67265 (ENHANCEMENT): Inventor: Add support for assembly families (iAssembly) to the common cad proxy
  • Issue #69463 (ENHANCEMENT): Inventor: Replace in "Komponentenanordnung" replaces all elements not just the selected.
  • Issue #70981 (PROBLEM): Inventor: Native checkout using family instances does not work
  • Issue #71245 (ENHANCEMENT): Move inventor interface to vc 14
  • Issue #71917 (PROBLEM): Inventor 2016 - Replace in subassembly with circular pattern leads to error
  • Issue #72237 (ENHANCEMENT): Inventor: Add fix to handle corrupt family parts / family assemblies
  • Issue #72427 (PROBLEM): INVENTOR; export of negative part (DIN 158) incorrect
  • Issue #72469 (ENHANCEMENT): Inventor 2014 Error during export
  • Issue #73057 (PROBLEM): Inventor parametric interface: Torus and segmented torus have wrong positions
  • Issue #73083 (ENHANCEMENT): Inventor 2017 interface
  • Issue #73991 (ENHANCEMENT): Inventor: Speed Improvement in Cad Proxy Attribute Retrieval
  • Issue #74239 (PROBLEM): Inventor Threads - API changed and the call is now different when user Change the thread.xls to "," instead of "."
  • Issue #74385 (PROBLEM): You cant export hollow cylinders in Inventor via parametric export
  • Issue #74927 (PROBLEM): Creation Warning when more then one sheet for a THREADTBL in the Thread.xls configurated/used
  • Issue #75259 (ENHANCEMENT): Inventor: Remove the Catia file export code completely from the plugins
  • Issue #75423 (PROBLEM): Inventor: PARTdataManager will be started on Replace when Seamless is already running
  • Issue #76025 (PROBLEM): Inventor, pattern does not work when using Touching surfaces
  • Issue #76517 (PROBLEM): Replacing part in pattern with many holes is very slow
  • Issue #78145 (PROBLEM): Keep selection when executing a selection query with multiple requested objects
  • Issue #78579 (ENHANCEMENT): Inventor: Consider Assets (as of Inventor 2014) in Common Cad Proxies
  • Issue #79153 (ENHANCEMENT): Allow Mesh info on selected face Inventor
  • Issue #79457 (PROBLEM): "Replace all instances" will not replace parts in upper level in Inventor
  • Issue #80679 (ENHANCEMENT): Inventor Placement dialog tooltip not consistent
  • Issue #82667 (ENHANCEMENT): Inventor: Add Entry Point for filtered attribute retrieval
  • Issue #82763 (PROBLEM): Inventor: Color_X (X=R,G,B) Attributes are not always returned
  • Issue #82811 (ENHANCEMENT): Add alpha channel to ps3 for transparency support
  • Issue #83381 (ENHANCEMENT): Add Attributes to Inventor Representation (also family table instance)
  • Issue #83673 (PROBLEM): Save as STEP broken in Inventor
  • Issue #83721 (PROBLEM): Livesearch - Inventor - Search on sketch
  • Issue #83755 (PROBLEM): Tab file corrupt when importing ipt file

Component CAD / Microstation / Interface

  • Issue #79917 (ENHANCEMENT): Microstation requirements

Component CAD / NX / Install

  • Issue #65869 (ENHANCEMENT): Remove NX 7 and 7.5 Installers from V11
  • Issue #72383 (PROBLEM): cns_place_nx8.macro is missing in PSOL 11 interface installation
  • Issue #77703 (ENHANCEMENT): NX 11 interface Installer

Component CAD / NX / Interface

  • Issue #18306 (ENHANCEMENT): Switch NX to C++ API to avoid old dialog display
  • Issue #29331 (ENHANCEMENT): Create parametric NX interface
  • Issue #34147 (PROBLEM): Problem when closing part (assembly mode) during export
  • Issue #37539 (ENHANCEMENT): Support of NX routing for multiple customers
  • Issue #46305 (ENHANCEMENT): EN 165210 semi-finished product - Dimensions only completely adjustable in CADENAS
  • Issue #52163 (ENHANCEMENT): Component array creation for TouchSurface placement strategy
  • Issue #52773 (ENHANCEMENT): Adapt to file name capabilities of current CAD system versions (NX)
  • Issue #55409 (ENHANCEMENT): Open PSOL Seamless dialog in an NX Resource Tab
  • Issue #58959 (PROBLEM): Offline native check is broken in NX 10.0.1 (complete solution)
  • Issue #59455 (PROBLEM): Placement assistant message translation NX10
  • Issue #59473 (PROBLEM): 2 NX Variables are not available in pdatamgr
  • Issue #59495 (PROBLEM): NX set Root Window lead to "Export to NX doesn't work"
  • Issue #59803 (ENHANCEMENT): Transfer to CAD (NX) dialog in PARTdataManager
  • Issue #60029 (ENHANCEMENT): CADProxies: in connection with PDM interface error message
  • Issue #60087 (ENHANCEMENT): Possibility to start replace from right mouse in cad Proof of Concept Unigraphics
  • Issue #61341 (PROBLEM): NX crash during PSOL positioning
  • Issue #61613 (PROBLEM): no zjv conversion possible
  • Issue #61747 (ENHANCEMENT): NX: Proxy based NativeCheckout
  • Issue #62183 (ENHANCEMENT): UGNX: Port Old Placement Dialog To New Proxy Based Dialog
  • Issue #63351 (PROBLEM): error in setValue -function for attributes
  • Issue #63353 (PROBLEM): pModelRepresentation.AddAttribute error
  • Issue #65839 (ENHANCEMENT): Create and test NX 11 interface
  • Issue #65851 (PROBLEM): Remove support for legacy NX versions (up to 7.5)
  • Issue #66079 (PROBLEM): Geosearch error with NX-Spreadsheet technology
  • Issue #66207 (PROBLEM): geosearch with lightweight and not fully loaded part doesn't work
  • Issue #66661 (PROBLEM): Replace does not work
  • Issue #66713 (ENHANCEMENT): NX: loading options are disarranged after export
  • Issue #66763 (PROBLEM): CAD: NX TeamcenterMode: Problem with onGetFileName (macro placement does not work)
  • Issue #67541 (PROBLEM): Add extended TC seedpart requirements for NX 10
  • Issue #70923 (PROBLEM): Flat pattern shouldn't appear in 3D-Preview
  • Issue #70989 (PROBLEM): with NX piping info file can´t be closed
  • Issue #71407 (ENHANCEMENT): Add Blend Feature to NX
  • Issue #71425 (PROBLEM): Symbols []() are handled incorrectly by the CAD proxies
  • Issue #72405 (ENHANCEMENT): NX MCD API for IFACE and PSOL (Mechanical simulation)
  • Issue #72421 (ENHANCEMENT): Replace button tool-tip should be changed in NX
  • Issue #72435 (PROBLEM): PSOL v11 assemblies exported in NX are not read only
  • Issue #72503 (PROBLEM): Wrong translation in placement dialog error
  • Issue #72541 (PROBLEM): Placement dialog in NX not working correctly when you try to insert screw with cone head
  • Issue #73507 (PROBLEM): LOD problem of DIN parts in NX
  • Issue #73675 (ENHANCEMENT): cad proxy: no update for linked parameters
  • Issue #74501 (PROBLEM): Wrong translation in placement dialog error
  • Issue #75159 (ENHANCEMENT): On Replacement of parts keep mates for the new part
  • Issue #75825 (ENHANCEMENT): NX, trying to edit exported psol assembly gives complicated message
  • Issue #76869 (ENHANCEMENT): NX - improve license error message
  • Issue #79553 (PROBLEM): NX 11 - Q&S Parts from QA Catalog are not working
  • Issue #79573 (ENHANCEMENT): Expand file name rules to current CAD capability
  • Issue #82813 (ENHANCEMENT): Add alpha channel to ps3 for transparency support

Component CAD / NX / Offline

  • Issue #61925 (PROBLEM): zjv generation error

Component CAD / OSDM / Install

  • Issue #71315 (PROBLEM): Installer: remove < OSDM 1800 from system
  • Issue #82707 (ENHANCEMENT): Installer (OSDM) Creo Direct Modelling V20.0 Interface

Component CAD / OSDM / Interface

  • Issue #51813 (ENHANCEMENT): Memory is not released after geoimport is finished with each file Creo Elements Direct Modeling
  • Issue #53829 (PROBLEM): CoCreate Modeling >=2007 cant be opened for some parts
  • Issue #57165 (ENHANCEMENT): OSDM: NativeCheckin: UI for selection of user defined csys origin is missing
  • Issue #61235 (ENHANCEMENT): CEDM: Full Batch Mode Support
  • Issue #61751 (ENHANCEMENT): CEDM: Proxy based NativeCheckout
  • Issue #62727 (ENHANCEMENT): Missing attributes in OSDM - Windchill
  • Issue #63311 (ENHANCEMENT): OSDM: Geometry API Integration
  • Issue #64531 (PROBLEM): OSDM: troubles during BatchImport: OSDM deadlocks during STL meshing of cabling parts
  • Issue #64637 (ENHANCEMENT): OSDM: Blend Features
  • Issue #64681 (PROBLEM): WWGM/OSDM fixes
  • Issue #64843 (ENHANCEMENT): Implement Surface Text Attributes
  • Issue #65433 (ENHANCEMENT): OSDM not brought into foreground when exporting
  • Issue #65529 (ENHANCEMENT): Window for placement of parts is in wrong place in creo direct modeling
  • Issue #65651 (PROBLEM): OSDM: No export to STL, STEP possible
  • Issue #66277 (ENHANCEMENT): CEDM: Support Of Embedded Documents
  • Issue #68697 (PROBLEM): performance problem in replace process
  • Issue #68895 (ENHANCEMENT): ifosdm change default key: NativeCheckinKey=osdm -> OSDM
  • Issue #71311 (ENHANCEMENT): Move OSDM to vc14 compiler
  • Issue #71313 (PROBLEM): remove < OSDM 1800 from system
  • Issue #74109 (PROBLEM): OSDM + Windchill: Windchill State is language dependent. Need a way to allow status queries in different languages
  • Issue #75597 (PROBLEM): OSDM: Script error, if replacing is hits a component not available anymore
  • Issue #76043 (PROBLEM): Creo osdm 19 cant place via touching surface
  • Issue #76811 (PROBLEM): Creo Elements Direct Modeling - native checkin does not work for a part with feature
  • Issue #76877 (PROBLEM): Creo Elements Direct Modeling - ps3 file could be loaded without any license
  • Issue #77831 (ENHANCEMENT): OSDM: Try To Implement Screw In Hole
  • Issue #79271 (ENHANCEMENT): Adjustments for catalog part export
  • Issue #79909 (ENHANCEMENT): ifosdmwwgm: Map Windchill Integer Attribute
  • Issue #80711 (ENHANCEMENT): OSDM geosearch on the Fly
  • Issue #81525 (ENHANCEMENT): OSDM V20.0 Interface
  • Issue #82669 (ENHANCEMENT): OSDM: Add Entry Point for filtered attribute retrieval
  • Issue #82817 (ENHANCEMENT): Add alpha channel to ps3 for transparency support for OSDM
  • Issue #82943 (PROBLEM): LiveSearch, CEDM, every second "Open part" action fails
  • Issue #84255 (ENHANCEMENT): OSDM Q&S BadStep handling

Component CAD / OSDM / Macro

  • Issue #80063 (PROBLEM): OSDM: Find a workaround for the annoying "I cannot create rotate extrusions about 180 degrees" bug

Component CAD / OSDM / Offline

  • Issue #76919 (PROBLEM): Creo Elements Direct Modeling offline export - improve error message when CAD is not running

Component CAD / Pro-E / Install

  • Issue #82705 (ENHANCEMENT): installer Creo 4.0 Interface

Component CAD / Pro-E / Interface

  • Issue #20787 (ENHANCEMENT): Prototyp Concept for "Screw in Hole"
  • Issue #32213 (ENHANCEMENT): CNSE12: Transparent parts in PARTdataManager are not exported transparent to Pro/E
  • Issue #36335 (ENHANCEMENT): Possibility to change the length of semi-finished parts in Pro/ENGINEER
  • Issue #53155 (PROBLEM): Empty CNSMASSEXACT values caused calculation error in PROE - Had to disable creatmassfeature
  • Issue #59669 (PROBLEM): Placement Dialog CREO not working
  • Issue #59697 (PROBLEM): Creo: Pattern Creation Causes Crash In Pro/E 5.0 & Creo 1.0
  • Issue #59707 (ENHANCEMENT): Creo Parametric, placement assistant error message pop-up could be tweaked
  • Issue #59965 (ENHANCEMENT): Improve concept for Prototype geosearch on the Fly
  • Issue #60313 (ENHANCEMENT): PTC products: create check which interface is loaded
  • Issue #60467 (PROBLEM): Pro/E, Creo: Error while processing family instances in very old models
  • Issue #60477 (ENHANCEMENT): Creo: Starting with Creo 3.0 + Unity: Support of FileNames with 255 characters
  • Issue #60675 (PROBLEM): Creo: Component Features have no name
  • Issue #61023 (ENHANCEMENT): Concept for Creo2 and Manufacturing
  • Issue #61227 (PROBLEM): CAD: CREO: pdm module reports error in AppAfterCreate part but part gets loaded in Creo
  • Issue #61749 (ENHANCEMENT): Creo: Proxy based NativeCheckout
  • Issue #61877 (ENHANCEMENT): Create Assembly/PART Dimensions´s for CAD (data from 3d dimensions)
  • Issue #62073 (ENHANCEMENT): Pro-E Piping Support
  • Issue #62495 (PROBLEM): Pro/E: Creo: Placement if a sub component is activated in Cad, fails
  • Issue #63841 (ENHANCEMENT): Creo: Support Placement In Subassemblies.
  • Issue #63981 (PROBLEM): Creo: Pattern replacement of Part "Sechskantschraube DIN 65523 A12 066-B defect
  • Issue #64077 (PROBLEM): ProE5: LBlue Screenshots during NativeCheckin
  • Issue #64551 (ENHANCEMENT): Add Blend Feature
  • Issue #65637 (PROBLEM): Cant export Parametric part to Creo parametric
  • Issue #65747 (PROBLEM): User defined feature nativecheckin doesn't work correct from Creo 3
  • Issue #65815 (PROBLEM): Seamless GeoSearch does not work in Creo Elements Pro 5.0
  • Issue #66013 (ENHANCEMENT): Replace error message is not completely translated in English
  • Issue #66017 (ENHANCEMENT): Creo Parametric seamless: add slider
  • Issue #68641 (PROBLEM): Creo: geometry api crashes in many parts after update of myvector.h (function winkel())
  • Issue #73191 (ENHANCEMENT): ifproewildfire: key GeoSearchWorkingDirectory not available?
  • Issue #74191 (PROBLEM): Creo: Speed Improvements In Cad Attribute Proxies
  • Issue #74285 (PROBLEM): Creo2:Elements not placed on layer when created and so cannot be hidden
  • Issue #74573 (ENHANCEMENT): Creo2 + PDM: Placement of Native into asm not working
  • Issue #75217 (ENHANCEMENT): MultiWindow Support For Live GeoSearch
  • Issue #76341 (PROBLEM): Creo Faulty ps3 for DIN 34823 M6x10: JT conversion fails
  • Issue #77689 (ENHANCEMENT): PTC_COMMON_NAME is used by Windchill to setname - Set State now fails - work around?
  • Issue #78457 (ENHANCEMENT): Allow Mesh info on selected face in Pro-E
  • Issue #79547 (ENHANCEMENT): Creo 4.0 Interface
  • Issue #80835 (PROBLEM): Creo, Seamless reporting internal errors but continues to work
  • Issue #80897 (PROBLEM): Creo Seamless crashes when CAD is closed and LiveSearch is active
  • Issue #81747 (ENHANCEMENT): Creo: Add login to windchill call
  • Issue #82671 (ENHANCEMENT): Creo: Add Entry Point for filtered attribute retrieval

Component CAD / Revit / Interface

  • Issue #28673 (ENHANCEMENT): rq info n iface availability
  • Issue #35547 (PROBLEM): Support of template Metric Generic Model face based.rvt for Revit
  • Issue #50921 (ENHANCEMENT): Estimation to enhance REVIT models with smart connections
  • Issue #64235 (ENHANCEMENT): Revit: Integration of PartCloud
  • Issue #64545 (ENHANCEMENT): Revit: Add Revit 2016 Support
  • Issue #64625 (ENHANCEMENT): Revit: Integration of PartCloud upload ZJV empty
  • Issue #64747 (ENHANCEMENT): PARTcloud Uploader: Add option to upload a specific folder
  • Issue #65139 (ENHANCEMENT): PARTcloud allow native file attachment while upload (Revit)
  • Issue #66311 (ENHANCEMENT): Revit need license check
  • Issue #66337 (ENHANCEMENT): Revit Parametric (Prototyp)
  • Issue #66479 (ENHANCEMENT): Revit: Support sub models
  • Issue #67009 (ENHANCEMENT): Revit upload to cloud button -> rename to BIMcatalogs.net
  • Issue #67289 (ENHANCEMENT): Revit upload doesn't work
  • Issue #68375 (ENHANCEMENT): revit bimcatalog uploader family table
  • Issue #68499 (ENHANCEMENT): Menu to export all family instances into a folder as SAT Files
  • Issue #68667 (ENHANCEMENT): Revit Cad-Proxies
  • Issue #68797 (ENHANCEMENT): Revit: Recursive PartCloud Directory Upload
  • Issue #68799 (ENHANCEMENT): Revit: CSV Export
  • Issue #68903 (ENHANCEMENT): Classification in RFA
  • Issue #69631 (ENHANCEMENT): Revit: Enhance Revit Static Translator To Allow BasePoint Selection By Classified Connection Point
  • Issue #71247 (ENHANCEMENT): RFA Quick & Simple exporter: remove basic parts
  • Issue #71593 (ENHANCEMENT): Revit: Parametric Export
  • Issue #71621 (ENHANCEMENT): Revit RFA Exporter for use in Quick and Simple
  • Issue #71655 (ENHANCEMENT): Revit remove existing elements from Templates
  • Issue #72001 (ENHANCEMENT): RVT classification -> RFT template selection multi-language support
  • Issue #72003 (ENHANCEMENT): RVT classification -> RFT template definition reset
  • Issue #72269 (ENHANCEMENT): error while RFA -> SAT / ZJV / mesh export
  • Issue #72691 (ENHANCEMENT): Revit additional features
  • Issue #72887 (ENHANCEMENT): Revit: Switch To Alternate Format (SAT) export
  • Issue #72941 (ENHANCEMENT): Revit offline - leave the generated RFA open
  • Issue #73105 (ENHANCEMENT): Allow flexible Length for profiles in Revit
  • Issue #73337 (ENHANCEMENT): Revit RFA import
  • Issue #73581 (ENHANCEMENT): Revit UI Review "Replace part"/"Insert part"
  • Issue #73837 (ENHANCEMENT): pass classification / class-attributes to Revit family
  • Issue #73897 (ENHANCEMENT): RFA Import use LOD setting
  • Issue #74053 (ENHANCEMENT): RFA files have variants, but no SAT exported
  • Issue #74069 (ENHANCEMENT): RFA Export to SAT - file name convention
  • Issue #74085 (ENHANCEMENT): RFT <-> Revit Classification mapping (multi-language rft support)
  • Issue #74483 (ENHANCEMENT): Revit 2017 Interface
  • Issue #74487 (ENHANCEMENT): Revit geometry fallback
  • Issue #74939 (ENHANCEMENT): REVIT -> SAT exporter - option to not create file ending ".rfa" in folder names
  • Issue #75753 (ENHANCEMENT): rfa importer handle units
  • Issue #75775 (ENHANCEMENT): RFA import ignore attributes
  • Issue #76201 (ENHANCEMENT): RFA import - colors / materials
  • Issue #76329 (ENHANCEMENT): RFA multiplier / independent from PSOL interface
  • Issue #76715 (ENHANCEMENT): Revit - connection points classification
  • Issue #76733 (ENHANCEMENT): Revit 2014
  • Issue #77117 (ENHANCEMENT): Revit 2016 (all versions) replace / seamless doesn't work
  • Issue #78153 (PROBLEM): Revit: split cfg attribute mapping to different languages
  • Issue #78163 (ENHANCEMENT): ifrevit.cfg: RVT classification -> RFT template definition add new templates to the Standard + fixes
  • Issue #78231 (ENHANCEMENT): Enhance attribute Mapping in CAD config (ifrevit.cfg -> mapping of classification names / attributes to RFA export)
  • Issue #78421 (ENHANCEMENT): Revit general connection points
  • Issue #78463 (ENHANCEMENT): Revit assembly code to be set
  • Issue #78499 (PROBLEM): Revit replace of component
  • Issue #80267 (ENHANCEMENT): RFA import VAR in variable names
  • Issue #80717 (ENHANCEMENT): Revit Connection points on pumps
  • Issue #81085 (ENHANCEMENT): RFA - connection point not applicable?
  • Issue #81629 (ENHANCEMENT): Revit RFA - OmniClass number in Project usage (Tree view of families)
  • Issue #82331 (ENHANCEMENT): revit language dynamic
  • Issue #82363 (ENHANCEMENT): Revit - reduce toolbar icons (import)
  • Issue #82377 (ENHANCEMENT): parametric option to be disabled
  • Issue #82677 (ENHANCEMENT): NX: Add Entry Point for filtered attribute retrieval
  • Issue #82815 (ENHANCEMENT): Add alpha channel to ps3 for transparency support
  • Issue #83709 (ENHANCEMENT): ifrevit.cfg - ignore attribute section
  • Issue #83773 (ENHANCEMENT): positioning of SAT solids in RFA

Component CAD / SolidEdge / Install

  • Issue #77043 (ENHANCEMENT): ST9 Interface Installer

Component CAD / SolidEdge / Interface

  • Issue #24804 (ENHANCEMENT): Replace Part and keep Mates
  • Issue #47341 (PROBLEM): Some threads not shown in Solid Edge
  • Issue #48913 (ENHANCEMENT): Create Parametric Geometry Engine for Solid-Edge
  • Issue #50405 (PROBLEM): CAD Proxy/SolidEdge: Instances are missing
  • Issue #54391 (PROBLEM): Problems with export DIN 2999 Thread
  • Issue #56661 (PROBLEM): Checkout does not open the correct instance
  • Issue #59501 (PROBLEM): Document scan SE ST6 assembly error
  • Issue #59527 (PROBLEM): Replace part from exported PSOL assembly in SolidEdge ST6
  • Issue #59641 (ENHANCEMENT): SolidEdge - User-friendly export
  • Issue #60027 (ENHANCEMENT): CADProxies: Solidedge in connection with PDM interface two times error message
  • Issue #60085 (ENHANCEMENT): Possibility to start replace from right mouse in cad Proof of Concept SolidEdge
  • Issue #61499 (PROBLEM): Error when checking out a model SolidEdge
  • Issue #61745 (ENHANCEMENT): SolidEdge: Proxy Based NativeCheckout
  • Issue #61921 (ENHANCEMENT): Create workaround / fix for long loading time of psol plugin
  • Issue #62185 (ENHANCEMENT): SE: Port Old Placement Dialog To New Proxy Based Dialog
  • Issue #62193 (ENHANCEMENT): Create Solid Edge ST8 Interface
  • Issue #62477 (PROBLEM): SolidEdge ST7, units of native checkin files are messed up
  • Issue #62481 (PROBLEM): Teamcenter/SolidEdge: Checkout: Logic of download only or download/checkout is swapped
  • Issue #63223 (PROBLEM): Iso_8736_B modelling error Solid Edge
  • Issue #64043 (PROBLEM): Export of ISO 8736 B to SE ST7 fails
  • Issue #65763 (PROBLEM): BRUNNTHALER: export to ST7 fails for most of the parts
  • Issue #66099 (PROBLEM): Remove ST2-ST3 Interface from Codebase
  • Issue #67095 (ENHANCEMENT): PARTsolution SMAP3D for Solid Edge
  • Issue #68247 (ENHANCEMENT): port Solid Edge iface onto vc14
  • Issue #71405 (ENHANCEMENT): Add Blend Feature to SolidEdge
  • Issue #71755 (PROBLEM): Replace in subassembly with mates crashes in SE ST7
  • Issue #71961 (PROBLEM): Cannot replace in Solid Edge
  • Issue #72103 (PROBLEM): native checkin of assembly with missing part throws exception
  • Issue #72719 (PROBLEM): SE Disable Placement dialog
  • Issue #73319 (PROBLEM): CAD Proxy/SE: Instances missing for the test part
  • Issue #73987 (ENHANCEMENT): SolidEdge: Speed Improvement in Cad Proxy Attribute Retrieval
  • Issue #75067 (PROBLEM): SolidEdge ST8 Replace does not work correctly
  • Issue #75595 (PROBLEM): Selection Workflow with empty selection causes error
  • Issue #75741 (PROBLEM): replace with duplicate names in subassembly patterns fails
  • Issue #75823 (PROBLEM): Solidedge, trying to edit exported psol assembly gives cryptic message
  • Issue #76019 (PROBLEM): SolidEdge crashes after placement of a screw into pattern
  • Issue #77007 (ENHANCEMENT): Develop ST9 Interface
  • Issue #77191 (PROBLEM): Replace in SolidEdge ST8 - Invoke DSP error
  • Issue #77193 (PROBLEM): Replacement error -> MIDENT is transferred in coded form
  • Issue #77257 (ENHANCEMENT): Solid Edge geosearch on the Fly
  • Issue #77649 (PROBLEM): Populated Family Instance shall return the Family Table File Name
  • Issue #78049 (PROBLEM): Placement of negative parts on plane doesn't work
  • Issue #78247 (ENHANCEMENT): FamilyTableMemberName of Populated Instance must match to the column name of the Instance in the Family File
  • Issue #78571 (PROBLEM): GetrepresentationsFiltered is faulty
  • Issue #78725 (PROBLEM): One thread missing when both threads are same diameter
  • Issue #78727 (PROBLEM): Standard thread informations are missing in ifsolidedge.cfg
  • Issue #79793 (PROBLEM): 2d export to SE doesn't work correctly
  • Issue #79801 (PROBLEM): Cant export native part into Empty ASM in SE ST9
  • Issue #79871 (PROBLEM): Replace all instances doesn't work in SE ST9
  • Issue #80011 (PROBLEM): Geosearch produces error if no part is selected
  • Issue #80043 (PROBLEM): Iface error when $CADENAS / $CADENAS_SETUP not available
  • Issue #80219 (PROBLEM): Simplified placement in Solid Edge
  • Issue #83039 (ENHANCEMENT): SE ST9 - "Error during creation of geometry: Access denied"
  • Issue #83613 (PROBLEM): Setting physical properties fails in ST9

Component CAD / SolidEdge / Offline

  • Issue #41423 (PROBLEM): GetDefaultRepresentationName fails with family members in SolidEdge
  • Issue #61895 (PROBLEM): Export of Q&S hybrid projects doesn't work with SolidEdge(offline)

Component CAD / Solidworks / Interface

  • Issue #23587 (ENHANCEMENT): Insert of flexible assemblies - Selection menu
  • Issue #37129 (PROBLEM): No checkout possible with PARTdataManager when 2D drawing is opened in SolidWorks
  • Issue #40147 (PROBLEM): Placing of Library Features in assembly / part brings error message
  • Issue #46533 (ENHANCEMENT): Support of SolidWorks Electrical and Piping
  • Issue #52661 (PROBLEM): Pattern option not available in SW2015
  • Issue #57053 (PROBLEM): Chinese part can't be exported to step format
  • Issue #59335 (PROBLEM): Replace part from subassembly with pattern error in SolidWorks 2015
  • Issue #59917 (ENHANCEMENT): Smap 3d Interface Prototype for Solidworks
  • Issue #60025 (ENHANCEMENT): CADProxies: Solidworks in connection with PDM interface two times error message
  • Issue #60083 (ENHANCEMENT): Possibility to start replace from right mouse in cad Proof of Concept Solidworks
  • Issue #60111 (ENHANCEMENT): Multiple placements in Solidworks without placement dialog not possible
  • Issue #60567 (PROBLEM): SolidWorks cannot export stp files when STEP is requested
  • Issue #60591 (PROBLEM): SolidWorks hangs when restarting seamless after killing the pseamless.exe
  • Issue #60775 (PROBLEM): Solidworks 2015, PSOL sub-assembly part replacement works incorrectly
  • Issue #61259 (ENHANCEMENT): freeze geometries after generation
  • Issue #61689 (ENHANCEMENT): Add document scan callback to SolidWorks menu
  • Issue #61743 (ENHANCEMENT): SolidWorks: Proxy based NativeCheckout
  • Issue #62187 (ENHANCEMENT): SW: Port Old Placement Dialog To New Proxy Based Dialog
  • Issue #62277 (PROBLEM): Solidworks 2015, parametric online export option is not working
  • Issue #62555 (PROBLEM): Solidworks interface, minor scrollbars graphical glitch in Seamless
  • Issue #62835 (PROBLEM): Cant replace 2 parts in SW 2015 when selecting in 3d instead of feature tree
  • Issue #63131 (ENHANCEMENT): Create SolidWorks 2016 Interface
  • Issue #64061 (ENHANCEMENT): VB Plugins for SWX Routing Application
  • Issue #64591 (PROBLEM): Part could be replaced in assembly exported in SolidWorks 2016
  • Issue #64771 (ENHANCEMENT): Solidworks/SolidEdge interface - Activating interface without restart gives error notification
  • Issue #64839 (ENHANCEMENT): Implement Surface Text Attributes
  • Issue #65181 (PROBLEM): Solid Works 2016 - unable to export parametric part
  • Issue #65297 (PROBLEM): Writing attributes does not work in SolidWorks
  • Issue #66273 (ENHANCEMENT): SolidWorks: Support Of Embedded Documents
  • Issue #66423 (ENHANCEMENT): NativeCheckin for UDFs via Standard Workflow.
  • Issue #66529 (PROBLEM): SWX crash during positioning
  • Issue #66591 (PROBLEM): show/hide positioning dialog in different use cases
  • Issue #68251 (ENHANCEMENT): Port SolidWorks iface onto vc14
  • Issue #68479 (ENHANCEMENT): SolidWorks/CAD Proxy: Remove special case for sldprt with only one instance
  • Issue #69027 (PROBLEM): Replace in Solidworks lead to Script error
  • Issue #71399 (ENHANCEMENT): Solidworks add Blend Feature
  • Issue #72443 (PROBLEM): SOLIDWORKS; export of negative part (DIN 158) incorrect
  • Issue #72655 (PROBLEM): Some SolidWorks functions do not work if the root is selected
  • Issue #73989 (ENHANCEMENT): SolidWorks: Speed Improvement in Cad Proxy Attribute Retrieval
  • Issue #75799 (PROBLEM): Prevent message when replacing component in subassembly pattern in ST7
  • Issue #76409 (ENHANCEMENT): Own assemblies with virtual parts cannot be transferred
  • Issue #77255 (ENHANCEMENT): Solidworks geosearch on the Fly
  • Issue #77653 (PROBLEM): SWX crashes because of switching back the representation
  • Issue #78159 (PROBLEM): SolidWorks makes virtual parts physical when Exporting STLs
  • Issue #78951 (ENHANCEMENT): Solidworks 2017
  • Issue #81281 (PROBLEM): Error in Solidworks 2014 when replacing part which is placed with pattern
  • Issue #83377 (PROBLEM): BOM list attributes in SWX
  • Issue #84565 (PROBLEM): SW can´t export 2d into drawing

Component CAD / Solidworks / Macro

  • Issue #59239 (ENHANCEMENT): Add export option to SolidWorks export macro to define custom output location.
  • Issue #61503 (ENHANCEMENT): Use latest thread definition to create Solidworks Macro
  • Issue #62623 (PROBLEM): swb error
  • Issue #68029 (ENHANCEMENT): SWB file cannot be loaded with SolidWorks
  • Issue #71401 (ENHANCEMENT): Add Blend Feature to Solidworks Macro

Component CAD / Solidworks / Offline

  • Issue #61535 (PROBLEM): Loading SolidWorks files in part compare does not work

Component ERP / SAP

  • Issue #27319 (ENHANCEMENT): web2cad: rq info on license - SAP3

Component PDM / Agile / Interface

  • Issue #53955 (ENHANCEMENT): PDM: TESTSCRIPTS: agile_public_api
  • Issue #62111 (PROBLEM): PDM: AGILE: PUBLIC_API: fix problem with error message on load (cfg keys not set)
  • Issue #63195 (PROBLEM): PDM: AGILE: don't request material attributes in checkout
  • Issue #63409 (PROBLEM): PDM: Agile: support case that there is no sysid (migrated data)

Component PDM / All / Common

  • Issue #48273 (ENHANCEMENT): Remove part type GEN and allow "getisGeneric"
  • Issue #48487 (ENHANCEMENT): PdmProxies: Teamcenter COMMOM: enhance packing of Items
  • Issue #48679 (ENHANCEMENT): PDM: PdmProxies: COMMON: create cache for object reusage
  • Issue #50253 (ENHANCEMENT): PLM sync/OSDM: Fix setting download information
  • Issue #53943 (ENHANCEMENT): PDM: TESTSCRIPTS: COMMON ISSUE
  • Issue #59377 (ENHANCEMENT): Export Assembly as Part
  • Issue #61797 (ENHANCEMENT): Teamcenter Attribute Mapping
  • Issue #62421 (PROBLEM): PLMsync/all: Package load on demand fails in some cases
  • Issue #62707 (ENHANCEMENT): Export Assembly as Part missing attachment preview and copyfrom attributes
  • Issue #63411 (PROBLEM): PDM: COMMON: Fix problems with PLMTable2 insert/update
  • Issue #63437 (PROBLEM): PDM: COMMON: Check and fix error behavior in plmtable2.vbs
  • Issue #65339 (ENHANCEMENT): PDM: COMMON: Raise error when checkout of native part fails
  • Issue #65347 (PROBLEM): PDM: PdmProxies: Solve problems with prxObjectWrapperC usage
  • Issue #65719 (PROBLEM): PDM: SolidWorks: Test native checkin of assembly with virtual sub parts
  • Issue #66085 (ENHANCEMENT): .NET Adapter: Support System.__ComObject and function calls on ifaces
  • Issue #69701 (ENHANCEMENT): PLM sync/Conversion: Use cache
  • Issue #72059 (ENHANCEMENT): PDM Proxies: Fix download for vault, profile
  • Issue #73587 (ENHANCEMENT): .NET Adapter: Add logger and improve exception passing
  • Issue #75129 (PROBLEM): PDM: COMMON: method setEmpty is missing from plmtable2DummyRecordC
  • Issue #75399 (ENHANCEMENT): Use table id instead of table name to access tables
  • Issue #76243 (ENHANCEMENT): PDM: TestScripts: update testscript code, test data and result files
  • Issue #76795 (ENHANCEMENT): PDM: PRO.FILE: Check if in case of native export using the filename from PDM is possible
  • Issue #76797 (ENHANCEMENT): PDM: VAULT: Check if in case of native export using the filename from PDM is possible
  • Issue #76799 (ENHANCEMENT): PDM: SMARTEAM: Check if in case of native export using the filename from PDM is possible
  • Issue #76897 (PROBLEM): PDM: ALL / SWEnterprisePdm: Fix multi configuration native checkin problem
  • Issue #77169 (PROBLEM): ChainCall: Fix speed problems with executeCallbacks
  • Issue #77345 (ENHANCEMENT): PDM/all: Log database changes during linkdb return mapping
  • Issue #80627 (ENHANCEMENT): Use numerical compare for numeric variables in XVARSET
  • Issue #83587 (PROBLEM): VBS: fix pathname bug in vbstools

Component PDM / ALL / PDMPROXIES

  • Issue #59113 (ENHANCEMENT): PDM Synchro add additional container objects Folder/User/...
  • Issue #59941 (PROBLEM): PLM sync/FSO: Duplicate children not filtered correctly
  • Issue #60047 (PROBLEM): PDM: PdmProxies: Windchill: CNS_QueryObjects.jsp: fix problems with LIKE
  • Issue #60071 (ENHANCEMENT): PLM sync/all: Regenerate test data
  • Issue #61157 (ENHANCEMENT): PDMProxies: Remove CadStartHelper. Use CadManager
  • Issue #61449 (ENHANCEMENT): PDM: PDMPROXIES: Implement query filter
  • Issue #61673 (PROBLEM): PDM: PDMPROXIES: Teamcenter: fix problem with custom Item type objects referenced in "view"
  • Issue #61795 (ENHANCEMENT): PDM: PDMPROXIES: make use of query filter
  • Issue #61865 (ENHANCEMENT): Use query filter for common pdm testscript
  • Issue #61873 (ENHANCEMENT): PDM: PDMPROXIES: fix ParamArray problem with SearchPropertyGroups
  • Issue #61981 (PROBLEM): PLMsynchro import for Inventor 2015 does not work for one assembly
  • Issue #62011 (ENHANCEMENT): PDM: PdmProxies: In FamilyTable use specified for data structure
  • Issue #62033 (PROBLEM): PDM: PdmProxies:NxTeamcenter: tc_nx_family_member_property has to be multi valued
  • Issue #62091 (ENHANCEMENT): PDM: PDMPROXIES: make use of query filter (follow up)
  • Issue #62169 (PROBLEM): PDM: PdmProxies: SwTeamcenter: fix problem with assignment of instances in conversion
  • Issue #62279 (ENHANCEMENT): Pdm: PdmProxies: Implement folder query for Teamcenter interface
  • Issue #62331 (PROBLEM): Pdm: PdmProxies: SwTeamcenter: Merge mode
  • Issue #62379 (ENHANCEMENT): PDM: PdmProxies: In FamilyTable, use specified for data structure
  • Issue #62471 (PROBLEM): PDM: PdmProxies: NxTeamcenter: download all family table instances to be able to read cad attributes on conversion
  • Issue #62565 (ENHANCEMENT): Plm sync/Profile: Get more info during query
  • Issue #62729 (ENHANCEMENT): PDM: PdmProxies: Rework Download/Conversion Mechanism
  • Issue #62761 (ENHANCEMENT): PLM sync/all: Change default for max_assembly_depth
  • Issue #63121 (ENHANCEMENT): PLM sync/all: Check ignoreFatalErrors=0
  • Issue #63585 (ENHANCEMENT): CSVpdm: Add support for instances
  • Issue #64535 (PROBLEM): PDM: PdmProxies: max_assembly_depth default 0 causes problems
  • Issue #64543 (ENHANCEMENT): PDM Proxies: getIfaceObject() shouldn't always connect to the pdm
  • Issue #65341 (PROBLEM): PDM: PdmProxies: NxTeamcenter: fix problem with long folder names and ugmanager export
  • Issue #65343 (PROBLEM): PDM: PdmProxies: Fix problems with Batch processes
  • Issue #65715 (PROBLEM): PDM: PdmProxies: SolidWorks: Test assembly with virtual parts
  • Issue #65717 (PROBLEM): PDM: PdmProxies: SolidWorks: Test assembly with virtual parts (conversion)
  • Issue #65913 (ENHANCEMENT): PLM sync/all: Misc improvements
  • Issue #66301 (PROBLEM): PLM sync/FSO: Document path might be incorrect
  • Issue #66797 (ENHANCEMENT): PDM: Proxies: Fix FamilyTables (add child list to instances + do not add suppressed children)
  • Issue #67213 (PROBLEM): SmarTeam PDM Proxy: Return date as string in the pdm attributes
  • Issue #67283 (PROBLEM): PDM: PdmProxies: Teamcenter: CREO: fix cadident/idnr on tc10 instances
  • Issue #68131 (ENHANCEMENT): PLMsync/all: Add support for family tables within assemblies
  • Issue #68399 (PROBLEM): PLMsync/all: Conversion fails for a version of file if the translator line is used
  • Issue #68693 (ENHANCEMENT): PdmProxies: use PdmLogin Service to get LoginData from PdmProxies cfg
  • Issue #69005 (ENHANCEMENT): PDM: PdmProxies: SAP: use cache for PdmDocument object creation
  • Issue #69623 (ENHANCEMENT): PDM: PdmProxies: Windchill: check if host & port can be removed from pdmProxies.cfg
  • Issue #71159 (ENHANCEMENT): PLMsync/SmarTEAM: Add option to query only the latest revision
  • Issue #71355 (ENHANCEMENT): PDM: PdmProxies: NxTeamcenter: Use cache in download code
  • Issue #71515 (ENHANCEMENT): PLM sync/all: Add translator pool
  • Issue #71699 (ENHANCEMENT): SeamlessPDM: Integrate into pdatamgr
  • Issue #71965 (ENHANCEMENT): PDM Proxies: Add GetInstanceByCadidentIdnr to PdmDocumentI
  • Issue #72221 (ENHANCEMENT): PDM: PdmProxies: Make Windchill Interface ready for other Cad systems than Creo
  • Issue #72417 (ENHANCEMENT): PDM proxies: Regenerate test data
  • Issue #72519 (PROBLEM): PLM sync/SMARTEAM: Complex query is invalid in some cases
  • Issue #72699 (PROBLEM): PLM sync/Windchill: Instances not expanded in some cases
  • Issue #72909 (ENHANCEMENT): Testscript: Remove cnsuid from output when testing fsopdm
  • Issue #73095 (ENHANCEMENT): PLM sync/all: Add cfg key for the OpenDocument options
  • Issue #73185 (ENHANCEMENT): PLM sync/all: Embedded: Add GetEmbeddedDocumentName()
  • Issue #75157 (PROBLEM): PDM: PdmProxies: Windchill: add date format used by windchill sql engine to cfg
  • Issue #75171 (PROBLEM): PDM: PdmProxies: Windchill: check if the "version bug" is a problem and can be solved
  • Issue #75179 (ENHANCEMENT): PDM: PdmProxies: Reduce memory usage
  • Issue #75207 (PROBLEM): PDM: PdmProxies: Windchill: fix problem with instance>family_table if latest family table has more than one version
  • Issue #76937 (ENHANCEMENT): PDM: PDMPROXIES: Teamcenter: support custom attributes
  • Issue #77015 (ENHANCEMENT): PDM: PDMPROXIES: Create cache tag for xml data
  • Issue #77211 (ENHANCEMENT): PLM sync/all: Conversion fails where the active instance should be the current (root-)container
  • Issue #77309 (PROBLEM): PDM proxies: Object factory not destroyed
  • Issue #78543 (PROBLEM): PDM: PDMPROXIES: WINDCHILL: use getLatestVersionIteration in getGenericWithInstances
  • Issue #78943 (ENHANCEMENT): PDM: PDMPROXIES: Windchill: add XML tag cache to jsp / windchill_public api
  • Issue #80625 (ENHANCEMENT): PDM: PDMPROXIES: remember connection state
  • Issue #80637 (PROBLEM): PDM: Windchill: add error message for invalid certificate error
  • Issue #81703 (PROBLEM): PLM sync/all: max_assembly_depth doesn't work when parent has more than one representation
  • Issue #82257 (ENHANCEMENT): PDM: Proxies: fix gettype on pdmProxyPropertyObjectC
  • Issue #83231 (PROBLEM): PDM: PDMPROXIES: SWEnterprisePdm: Fix UNKOWN result object bug

Component PDM / CIMDATABASE / COMMON

  • Issue #51461 (ENHANCEMENT): SWX-CDB interface
  • Issue #69059 (ENHANCEMENT): CDB: Move public api to 32 bit host
  • Issue #69067 (ENHANCEMENT): CDB: Add support for old TalkAPI version
  • Issue #73365 (PROBLEM): CDB: License key was wrongly changed to CDB
  • Issue #73387 (ENHANCEMENT): CDB/WSM: Create pdm iface for the CONTACT Workspace Manager

Component PDM / Enovia Matrix / Interface

  • Issue #52719 (ENHANCEMENT): Create ifpdm Module for Catia V6 Enovia

Component PDM / Intralink / Pro-E

  • Issue #81131 (ENHANCEMENT): CreateAndLinkWTPart - make Subtype configurable

Component PDM / PDMWorks Enterprise / Interface

  • Issue #53945 (ENHANCEMENT): PDM: TESTSCRIPTS: SWEnterprisePdm_public_api
  • Issue #65787 (ENHANCEMENT): PDM: SwEnterprisePdm: Remove C++ wrapper
  • Issue #76879 (PROBLEM): PDM: SwEnterprisePdm: Support SearchByFileName for native parts when FileRenaming is enabled

Component PDM / SAP / Interface

  • Issue #62699 (PROBLEM): Fixes for the SAPPLM iface
  • Issue #62823 (ENHANCEMENT): Extension of the sapplm_public_api
  • Issue #66297 (ENHANCEMENT): SAPPLM: Resizable DIS selection dialog
  • Issue #66299 (ENHANCEMENT): SAPPLM: Add optional info messages if all errors get filtered
  • Issue #66307 (PROBLEM): SAPPLM: FilterDIS/FavDIS doesn't work for all use cases
  • Issue #67105 (ENHANCEMENT): SAPPLM: Misc enhancements
  • Issue #67167 (ENHANCEMENT): SAPPLM: Checkin preview's last
  • Issue #71605 (ENHANCEMENT): Add support to new ifsapplm
  • Issue #72477 (ENHANCEMENT): PDM: SAP-ECTR (PublicAPI ++ PDM-Modul)
  • Issue #77525 (ENHANCEMENT): As of SolidWorks 2016, in new docs, file properties are missing
  • Issue #78617 (ENHANCEMENT): SAPPLM: Update to new CIDEON binaries
  • Issue #79933 (PROBLEM): Finish sapcadenassrv.exe, when PARTsolutions is finished
  • Issue #80621 (ENHANCEMENT): PDM: SapEctr: Set shorttexts & longtexts (RFC call)
  • Issue #80647 (ENHANCEMENT): PDM: SapEctr: NX: Allow usage of NX macro placement
  • Issue #80945 (ENHANCEMENT): PDM: SapEctr: support "" as characteristic value
  • Issue #80955 (ENHANCEMENT): PDM: SAPECTR: Add white list example file to iface/plm/ifsapectr
  • Issue #81065 (PROBLEM): PDM: SapEctr: Use neutral characteristic value for check

Component PDM / SAP / Solidworks

  • Issue #67079 (PROBLEM): SAP PLM Exported ASM Subparts have no SAPName Property

Component PDM / Smarteam / Interface

  • Issue #59161 (ENHANCEMENT): SmarTeam: Refresh after export
  • Issue #60275 (ENHANCEMENT): PDM: Teamcenter: find better solution for getXRevisionId
  • Issue #67055 (ENHANCEMENT): Parts in status "Changed" after Checkin
  • Issue #69057 (ENHANCEMENT): SmarTeam: Move public api to 32 bit host
  • Issue #71293 (ENHANCEMENT): SmarTeam: Native checkout by object/class id doesn't work
  • Issue #82533 (ENHANCEMENT): Swim - Suppressed dependency models export problem

Component PDM / Teamcenter / Catia

  • Issue #56633 (ENHANCEMENT): PDM: Teamcenter: ifcnsteamcenter: Catia - Add support for assemblies
  • Issue #60281 (PROBLEM): PDM:Teamcenter:Catia: Add support for TCIC versions that need Catia UUID

Component PDM / Teamcenter / Interface

  • Issue #50057 (ENHANCEMENT): Teamcenter: SavedSearches: make search names configurable
  • Issue #59995 (ENHANCEMENT): PDM: Teamcenter: ifcnsteamcenter: fix some weaknesses
  • Issue #61923 (ENHANCEMENT): Create an object link (manufacturer object) function with our API
  • Issue #63265 (ENHANCEMENT): PDM: Teamcenter: Add UTF-8 support
  • Issue #63449 (PROBLEM): PDM: Teamcenter: C++: Check and fix getStringValue() on Variant
  • Issue #63663 (ENHANCEMENT): PDM: COMMON: Create login service that can be used with all PDM modules etc.
  • Issue #63739 (ENHANCEMENT): Teamcenter Projectmapping
  • Issue #65831 (ENHANCEMENT): PDM: Teamcenter: Add custom Dataset to existing Item
  • Issue #66059 (ENHANCEMENT): PDM: Teamcenter: improve error messages of ExecuteSavedQuery
  • Issue #66141 (PROBLEM): PDM: Teamcenter: ProjectMapping
  • Issue #66209 (PROBLEM): Pdm: Teamcenter: SolidWorks: Saved search is missing
  • Issue #66325 (ENHANCEMENT): PDM: Teamcenter: Fix order in which HookService methods are called
  • Issue #66847 (ENHANCEMENT): PDM: Teamcenter: ALL make use of "PDM.LoginService"
  • Issue #66977 (PROBLEM): PDM: Teamcenter: SoaClient: fix session problems
  • Issue #68989 (PROBLEM): PDM: Teamcenter: SSO fix timeout problem
  • Issue #71565 (ENHANCEMENT): PDM: Teamcenter: Add version info to saved search description
  • Issue #71787 (ENHANCEMENT): Pdm: Teamcenter: switch to Teamcenter 11 SOA_CLIENT
  • Issue #74905 (ENHANCEMENT): PDM: Teamcenter: repeat service calls even when an internal server error occurs
  • Issue #75093 (PROBLEM): PDM: Teamcenter: public api: fix problem login mode default value
  • Issue #75861 (ENHANCEMENT): PDM: Teamcenter: SOA client: MoveToNewFolder: sourcefolder = targetfolder
  • Issue #76575 (PROBLEM): PDM: Teamcenter: successful login followed by failed login followed by another successful login leads to crash
  • Issue #76735 (PROBLEM): PDM: Teamcenter: GetSavedSearch: first call with fresh session/server fails
  • Issue #78759 (ENHANCEMENT): PDM: Teamcenter: Add time format for conversion from CADENAS DateTime to Teamcenter DateTime to cfg
  • Issue #81819 (ENHANCEMENT): Sw\Tc\Swim:Checkoutview fails if metadata is missing
  • Issue #82443 (ENHANCEMENT): Swim.txr can only be read in UTF-8
  • Issue #82527 (ENHANCEMENT): SWIM - txr access problem
  • Issue #82529 (ENHANCEMENT): Swim - read only is not applied (and causes problem)
  • Issue #82531 (ENHANCEMENT): Swim - Design revision state is missing in some case
  • Issue #84161 (ENHANCEMENT): Read only flag if item is in checkout state

Component PDM / Teamcenter / Inventor

  • Issue #66139 (PROBLEM): PDM: Teamcenter: Inventor: Default value for TC_TargetFolder missing

Component PDM / Teamcenter / Pro-E

  • Issue #59331 (ENHANCEMENT): PDM: Teamcenter: Creo: IPEM: ipem-import does not update txr file

Component PDM / Teamcenter / SolidEdge

  • Issue #61767 (PROBLEM): PDM: Teamcenter: SolidEdge: Teamcenter mode switched off after pdm callback returns error state
  • Issue #63243 (ENHANCEMENT): Implement/Test Solidedge Teamcenter Multicad 2015-Q4

Component PDM / Teamcenter / Unigraphics

  • Issue #68103 (ENHANCEMENT): Check filling of multi language fields in Teamcenter
  • Issue #68211 (PROBLEM): [Teamcenter Integration] child parts dataset isn't checked in automatically
  • Issue #68447 (ENHANCEMENT): Quick & Simple export to NX + Teamcenter

Component PDM / Vault / Interface

  • Issue #48275 (ENHANCEMENT): Vault: Remove part type GEN and add support for aux files
  • Issue #49453 (ENHANCEMENT): Vault: Add support for different file stores
  • Issue #59847 (ENHANCEMENT): how to change the state of a vault item.
  • Issue #60001 (ENHANCEMENT): PLM sync/Vault: Further improve handling of error 300.
  • Issue #60189 (ENHANCEMENT): Vault: Evaluate .NET based iface
  • Issue #62945 (ENHANCEMENT): Vault: Port interface to .NET api
  • Issue #62947 (ENHANCEMENT): Vault: Port pdmproxy to .NET api
  • Issue #63539 (ENHANCEMENT): Vault: Create public api based on .NET api
  • Issue #63693 (ENHANCEMENT): Vault: Create test script for new public api
  • Issue #63695 (ENHANCEMENT): .NET Adapter: Create test script
  • Issue #63697 (ENHANCEMENT): Vault: Update pdm proxy test data
  • Issue #75117 (ENHANCEMENT): Vault need to keys free/commercial

Component PDM / Windchill / Install

  • Issue #68329 (PROBLEM): PDM Windchill - Error message when installing SolidWorks PDM module

Component PDM / Windchill / Interface

  • Issue #57239 (ENHANCEMENT): WWGM: Get rid of async mode and use the workspace onSave listener instead
  • Issue #57903 (ENHANCEMENT): PDM / PdmProxies: Windchill: JSP: Fix problems with NAME NUMBER etc.
  • Issue #58395 (PROBLEM): PTC Windchill Workgroup Manager for UGS NX not working in PSOL 10
  • Issue #59703 (ENHANCEMENT): Check PDMLink workflow / performance
  • Issue #60491 (PROBLEM): PDM: Windchill: add support for jsp parameter values containing '&'
  • Issue #63345 (ENHANCEMENT): OSDM+WWGM: Search Documents using different names
  • Issue #65011 (ENHANCEMENT): Windchill Search for Attribute (must work with OSDM and Creo)
  • Issue #66849 (ENHANCEMENT): PDM: Windchill: ALL make use of "PDM.LoginService"
  • Issue #68687 (PROBLEM): WWGM: Download fails for versions newer than WC10.2 M20
  • Issue #68843 (PROBLEM): WWGM: Can't set upload folder for more recent WWGM versions
  • Issue #73891 (PROBLEM): WWGM Iface: Adapt to LoginService
  • Issue #75911 (PROBLEM): PDM: Windchill: CNS_GetDataByObjectIds.jsp: fix problem with invalid OIDs
  • Issue #77781 (PROBLEM): PLMS - Download of Instances from Windchill in combination with Creo fails
  • Issue #78461 (ENHANCEMENT): WWGM: Integration crashes WWGM on startup (WC11 M010+)
Prev Up Next
2.13.1.10. NX - Attributes: Units, category and Expression formula readable and optionally writable Home Chapter 3. V10