 |
CADENAS GmbH
Edition V12.6, 07/2023
Copyright © 1992-2023
Text and illustrations have been created using the greatest care. CADENAS GmbH, authors and translators cannot assume legal responsibility or any liability for any incorrect information and the consequences thereof. The information contained in this manual is not subject to liability and can be modified without further notice. CADENAS GmbH is not entering any obligation.
This manual is protected by copyright. All rights reserved. The rights of the documentation are owned by CADENAS GmbH. No part of this book may be reproduced or transferred to a language that can be used by machines, in particular printing processing equipment without written permission from CADENAS GmbH. The rights for reproduction in the form of lectures, radio and television are also reserved.
Copyright 1992-2023 CADENAS GmbH. All rights reserved.
CADENAS, PARTsolutions, PARTdataManager, PARTshaft, PARTconnection, eCATALOGsolutions, PARTdesigner, PARTconfigurator, PARTdxfconverter, PARTlanguage, PARTident, PARTeditor, PARTproject, PARTmedia, Visual Configurator, PARTserver and PDMsolutions, PARTwarehouse, PARTdataCenter are trademarks of CADENAS GmbH, Augsburg, Germany. All other brand names, company names or product names are trademarks or registered trademarks of their rightful owners.
| Germany | |||||||||
| CADENAS GmbH Augsburg |
| ||||||||
| Italy | |||||||||
| CADENAS Italiana s.r.l. |
| ||||||||
| France | |||||||||
| CADENAS France SARL |
| ||||||||
| USA | |||||||||
| CADENAS PARTsolutions LLC |
| ||||||||
| CADENAS PARTsolutions LLC, West Coast Office |
| ||||||||
| South Korea | |||||||||
| CADENAS GmbH |
| ||||||||
| Japan | |||||||||
| CADENAS WEB2CAD Inc. |
| ||||||||
| China | |||||||||
| CADENAS China ltd. |
| ||||||||
Table of Contents
- Preface
- 1. V12.6
- 1.1. How to create certificates at customer?
- 1.2. Client in Client-Server environment uses Web access
- 1.3. 3Dfindit config and plugins available via SITESETUP
- 1.4. Changes for setting up the ERP environment
- 1.5. Default name rule for filenames does not include material
- 1.6. Color templates removed from sketch search
- 1.7. NX: Type of constraints configurable
- 1.8. Teamcenter: Remove old batch file (creo ipem) and extra cns api (inventor tcai) based interfaces
- 1.9. SAP/ECTR: Allow empty lines in attribute mapping (longtexts)
- 2. V12.0 SP5
- 2.1. Client-Server installation: Selective updates on client
- 2.2. PARTsolutions Professional / eCATALOGsolutions: Determine User location in installer
- 2.3. NX: Export with topology information
- 2.4. 3Dfindit CAD integration: Error message after export
- 2.5. Support for complex custom attributes
- 2.6. Teamcenter classification can be filled with eClass basic or advanced information
- 2.7. Rename Files with SOLIDWORKS PDM
- 2.8. Inventor-WWGM: Asynchronized upload
- 2.9. Removed RC4 encryption method
- 2.10. Teamcenter 13/Creo7: Problem while storing document when using TC_HOOK_SERVICE.moveToNewFolder
- 3. V12.0 SP4
- 3.1. SAP ECTR: Export to NX 1980
- 3.2. Vault-Inventor: Error during checkin of document
- 3.3. Comparing own parts - How to get best results from V11 legacy data?
- 3.4. MSI installation: Silent Install
- 3.5. Program help: changed default source
- 3.6. Adjust attribute values transferred to CAD
- 3.7. Creo/Windchill with PLMsynchro: Autologin
- 3.8. Disable placement dialog
- 3.9. Open Seamless with Geosearch function
- 3.10. Pause pipeline after more than x reports per minute
- 4. V12.0 SP3
- 5. V12.0 SP2
- 6. V12.0 SP1
- 7. V12.0 SP0
- 8. V11.00 SP12
- 9. V11.00 SP11
- 10. V11.00 SP10
- 11. V11.00 SP9
- 11.1. Update Geo index
- 11.2. PARTadmin Rights administration
- 11.3. Conversions from Creo to "STEP" format
- 11.4. For creating fingerprints Mesa is used by default
- 11.5. Switch internal SE version numbering to current year to match their naming conventions
- 11.6. Geoindex, Topoindex oder Partialindex reparieren
- 11.7. Allow to filter projects and lines for geo index generation
- 11.8. Create backups when updating the GeoIndex
- 11.9. Use new environment variable $CADENAS_POOL
- 11.10. SAPPLM: Support for CATIA macro interface
- 12. V11.00 SP8
- 13. V11.00 SP7
- 14. V11.00 SP6
- 15. V11.00 SP5
- 16. V11.00 SP4
- 17. V11.00 SP3
- 17.1. Seamless: Enter ERP number during export
- 17.2. PLM Synchro and "Any" search
- 17.3. Catalog update: HTTP/S, SSL handshake connection error
- 17.4. Parallel downloads: New option in online update
- 17.5. $CADENAS_DATA/pool: General access
- 17.6. Running PLMsynchro with Capvidia
- 17.7. NX 12 interface available
- 17.8. NX-Teamcenter: Create "Alternative Representations"
- 17.9. NX-Teamcenter: Assembly templates not recognized during Teamcenter export
- 17.10. OSDM+WWGM: WWGM11 requires different Save workflow than WWGM10
- 18. V11.00 SP2
- 19. V11.00 SP0
- 19.1. List of failed fingerprint generation avoids anew attempt
- 19.2. Color value range columns
- 19.3. SSL encryption
- 19.4. Classification for "NOSECTION" and "RAWMATERIAL" parts
- 19.5. Variable CURRENTVARSET
- 19.6. Environment variable CADENAS_SHARED
- 19.7. Configure visibility of mirrored parts
- 19.8. Remote Translation Service for Capvidia
- 19.9. Partial search
- 19.10. Seamless.cfg: Key "AlwaysOnTop" as workaround for key "KeepOnTop"
- 19.11. Topological values are found with Volltextsuche / Update indexes
- 19.12. Create custom docks with a web-view via config
- 19.13. Report sharing
- 19.14. Include / exclude lists for geo index preloader
- 19.15. NX: Testing PARTsolutions parts in the Mechatronics Concept Designer
- 19.16. NX: Unicode support in file names
- 19.17. NX Routing Options
- 19.18. NX: Misaligned loading options after export
- 19.19. NX - Attributes: Units, category and Expression formula readable and optionally writable
- 19.20. Inventor: Read project name for template selection
- 19.21. Inventor: Several versions in parallel operation
- 19.22. PDM : COMMON : Login service that can be used with all PDM modules etc.
- 19.23. Vault: Interface ported to .NET api
- 19.24. Property transfer without geometry export
- 19.25. Interface for Catia V6 - Enovia
- 19.26. Plugins for SWX Routing Application
- 20. V10.00 SP11
- 21. V10.00 SP9
- 22. V10.00 SP8
- 23. V10.00 SP6
- 24. V10.00 SP2
- 25. V10.00 SP1
- 26. V10.00 SP0
- 26.1. NX - Problem when generating 2D previews during Offline Native Checkin
- 26.2. geomsearch.cfg - Number of features configurable
- 26.3. Adjust arrangement of docking windows
- 26.4. Customer stylesheets for GUI elements
- 26.5. Encrypted communication with LinkDB server
- 26.6. Control evaluation of SQL state on startup
- 26.7. Changed default for NB display in 3D view
- 26.8. PARTapplicationServer - Slow connection on single clients
- 26.9. Key "PARTSELECTION_SHOW_..." - Hide "Part selection" item or move on tab
- 26.10. Updates of search indexes (geo and text) enhanced
- 26.11. Rework "Tweakmenu"
- 26.12. Database queries routed via PARTapplicationServer
- 26.13. PARTsolutions Update more simple: Second Setup directory contains customized changes
- 26.14. LinkDB changes are logged
- 26.15. PARTsolutions support for NX 10
- 26.16. All CADs: Display of dimensions and parameters on NativeCheckin is configurable
- 26.17. Teamcenter: SingleSignOn (SSO) added
- 26.18. SolidWorks 2015: PARTsolutions menu is under "Tools" menu
- 26.19. Creo/Teamcenter: Default poolpath './' correctly resolved by Teamcenter
- 26.20. Teamcenter / SolidEdge: "Insert" transaction (NativeCheckin) implemented
- 26.21. Vault: Windows login supported
- 26.22. All CADs: Unknown or not supported mates (tilt / swivel) are replaced by fixed mates
- 27. V9.08 SP3
- 28. V9.08 SP2
- 29. V9.08 SP1
- 29.1. Teamcenter - UG-NX: HandleError in TC_HookService
- 29.2. Command-line script updates ERP search index
- 29.3. Special thickness algorithm available in geomsearch.cfg
- 29.4. PARTdataManager: Suppress note at missing search indexes
- 29.5. Global and local PARTapplicationServer settings
- 29.6. SharedIndex on $CADENAS_USER
- 29.7. Check link index
- 29.8. Scripts for statistical evaluations
- 29.9. start.env with conditional sections
- 29.10. Show specific Topology and/or ERP values in search results
- 29.11. Suppress regeneration of missing topology data
- 29.12. Execute reports on AppServer
- 29.13. Reports - Visible for all?
- 29.14. Part comparison - 3D view old/new
- 30. V9.08
- 30.1. Prioritize catalogs
- 30.2. PARTapplicationServer
- 30.3. New Geometric Search Index - Settings geomsearch.cfg
- 30.4. Warm up search for geo search
- 30.5. Document scan: Identify parts without MIdent via CAD attribute
- 30.6. Dublettenreport - Already listed duplicates are marked
- 30.7. Dublettenreport: Comparison covers all project lines
- 30.8. Reports with additional filters Variables search | Topology search | Preferred rows
- 30.9. Speedup slow database connection - Increase number of datasets to cached
- 30.10. Syntax/behavior harmonized between CreationOptions and AttributeMapping
- 30.11. Installer for "ENOVIA LCA" PDM system
- 30.12. Edit PLMTABLE2 in dialog box
- 30.13. GeoSearch: Load desired search template automatically
- 30.14. Geometry import: Mesh reduction option dialog box
- 30.15. PARTadmin: Status colors - Different colors for rest of results with or without condition
- 30.16. Assembly CNSMASS_EXACT transferred to CAD
- 30.17. ECCN Numbers are transferred to target systems
- 30.18. Automatically use calculated mass, if no other info is available
- 30.19. Inventor - Set appearance independent from material
- 30.20. Inventor - Enhanced configuration possibilities for iMates
- 30.21. NX - Different modes for Native Checkin
- 30.22. NX - "Material"-attribute error message - Exclude attributes from processing
- 30.23. NX - Evaluation of template attribute types and adjustment at export
- 30.24. NX 9 - STL quality can be improved by config key
- 30.25. NX 9 - Supported with PARTsolutions 9.08
- 30.26. NX9 - Ribbon menu by default
- 30.27. NX9 - Setting options for physical properties from PARTsolutions
- 30.28. NX - Teamcenter: Update from version NX 9 to NX 9.01
- 30.29. PDM Profile - Parameter value for PARTsolutions preview changed
- 30.30. Teamcenter-Pro/E - "Description" bug fixed
- 30.31. NX-Teamcenter - LinkDB ReturnMapping implemented
- 30.32. SAP PLM for NX - Escaping for specified characters supported
- 30.33. Teamcenter - "Saved searches"
- 31. V9.07 SP1
- 32. V9.07
- 32.1. Replace_std.cfg - Rules for complete subtrees supported
- 32.2. Additional functions for Teamcenter via "api.vbb"
- 32.3. Key "SearchFilterHint_MaxResults" - Search result filtered - Control of message
- 32.4. Batchconvert.exe
- 32.5. Abort native checkin for parts/assemblies with more than one characteristic
- 32.6. New entries for variable status in PS3 file
- 32.7. Column sequence adjustable role dependent
- 32.8. New erpcustom [ADDTODB] script: erp_duplicatecheck.vbs
- 32.9. Key "HiddenItemToolbarEntries" - Set buttons in search result list visible or hidden via configuration file
- 32.10. Simplify CAD/PDM configuration with macros
- 32.11. Resource editor for vbb files
- 32.12. Installation of AutoCAD 2014 interface AutoCAD 2014 installation
- 32.13. NX 8.5 interface supported
- 32.14. NX: New pattern features
- 32.15. NX: Add categories to attribute mapping
- 32.16. Key "PipingConnPoint" - NX routing function
- 33. V9.06
- 34. V9.05
- 34.1. Multi Site Installation (9.05 SP0)
- 34.2. Dependencies between index and software version (9.05 SP0)
- 34.3. ProFile PDM - Settings for preview images (9.05 SP0)
- 34.4. MicroStation V9 Interface (9.05 SP0)
- 34.5. Teamcenter - NX: Allow putting NX dataset into already existing items with other datasets (9.05 SP0)
- 34.6. Installer for Creo Elements/Direct Drafting 18 Interface available (9.05 SP0)
- 34.7. New key to change PLMTABLE2 Docview header (9.05 SP0)
- 34.8. Keep number of versions: Default changed (9.05 SP0)
- 34.9. GeoImport - File size restriction (9.05 SP0)
- 34.10. SolidWorksEnterprisePdm interface supports NativeCheckin (9.05 SP0)
- 34.. PDMWorks Enterprise interface - New keys added (9.05 SP0)
- 34.12. PDM Agile - Support for "useplmtable2" (9.05 SP0)
- 34.13. Teamcenter - Inv | ProE/Creo | SE | NX - functions concerning "TargetFolder" (9.05 SP0)
- 34.14. PDMLink Windchill interface - Creation of not existing directories (9.05 SP0)
- 34.15. PDMLink Windchill interface - Determine version for checkout (9.05 SP0)
- 34.16. PDM interfaces in general - Category for entry in PLMTable2 (9.05 SP0)
- 34.17. PDMLink Windchill interface - Complete path declaration to "target library" (9.05 SP0)
- 34.18. Line sorting in PARTdataManager (9.05 SP0)
- 34.19. Connections
- 35. V9.04
- 35.1. Restart Search Server when configured memory space is exceeded (9.04 SP2)
- 35.2. Warning in NX, if material is not existing (9.04 SP2)
- 35.3. Path for log4cxx.properties changed (9.04 SP2)
- 35.4. Update Lucene-Index bei großen Katalogen mit PARTadmin 64bit (9.04 SP2)
- 35.5. SQL-Statements für Schlagwortsuche zu komplex (9.04 SP2)
- 35.6. Windchill: Beliebige Zusatzdateien in den Workspace auschecken (9.04 SP1)
- 35.7. NX: Makro-unabhängiger Platzierungsdialog (9.04 SP1)
- 35.8. Keyword search - Functionality (9.04)
- 35.9. Combinated search in PSOL and LinkDB (9.04)
- 35.10. PARTdataCenter - Article Number Assignment (9.04)
- 35.11. Remember selected role (9.04)
- 35.12. Vault for Inventor 2013 available
- 35.13. Vault: Non-library directories (with subdirectories) supported (9.04)
- 35.14. Vault: Key for checkout latest version "yes/no" (9.04)
- 35.15. SAP integration enhancement (9.04)
- 35.16. Shared-Index einrichten (9.04)
- 35.17. Volltext-Suchindizes selbst generieren
- 35.18. SEW Drive Konfigurator + PARTsolutions/professional (9.04)
- 35.19. Volltextsuche: Priorisierung zu durchsuchender Felder (9.04)
- 35.20. Catalog update - Versionen behalten (9.04)
- 35.21. Use encrypted passwords in config file (9.04)
- 35.22. NX SAP (PDM) Interface von DSC (9.04)
- 35.23. Startgeschwindigkeit von PARTdataManager bei LinkDB-Verwendung verbessern (9.04, 9.03 SP2)
- 35.24. Batchconvert.exe (9.04, 9.03)
- 35.25. Search server (9.04, 9.02)
- 36. V9.03 or older
- 36.1. Agile-Inventor integration (9.03 SP3)
- 36.2. Teamcenter-ProEngineer integration (9.03 SP3)
- 36.3. Geometric index / Mesh reduction - Default changed (9.03 SP3)
- 36.4. Classimporter: Add document link (green column) (9.03 SP3)
- 36.5. ProE configuration / new key concerning GeoSearch (9.03 SP3)
- 36.6. Placement dialog on/off via configuration file (9.03 SP2)
- 36.7. Catalog update with ERP integration - Update manager (9.03 SP2)
- 36.8. Logging Viewer (9.03 SP2)
- 36.9. PARTadmin Geometry import: Creation of Classimporter files
- 36.10. Mark CAD documents in PARTdataManager (9.03 SP2)
- 36.11. Hide specific catalogs role dependent (9.03 SP2)
- 36.12. Crash dump (9.03 SP2)
- 36.13. Automatic generation of ERP number + export dialog for material selection (9.03 SP1)
- 36.14. License manager / License administration (9.03 SP1)
- 36.15. FLM Server and Licenses (9.03 SP1)
- 36.16. Classification Toolbar (9.03 SP1, 9.00)
- 36.17. Status colors for catalog index and Status indicating bitmaps for table view (9.03 SP1, 9.03, 9.02)
- 36.18. ProFile - Part mapping using SML number (9.03)
- 36.19. Change title in 3D view (9.03)
- 36.20. PARTdataCenter - Create PARTsolutions catalog from BMEcat data (9.03)
- 36.21. Connections: Always show holes (also without ERP integration) when "preferred rows" and "filtered tree" is on (9.03)
- 36.22. Request parts via e-mail - Part information (Mident) attached as ".psmid" file (9.03)
- 36.23. Classimporter (9.03, 9.02, 9.00)
- 36.23.1. Delete pool files (9.03)
- 36.23.2. Insert variables in LinkDB (9.02)
- 36.23.3. Translatable text attributes (9.02)
- 36.23.4. Apply units for parts (9.02)
- 36.23.5. Check files (9.02)
- 36.23.6. Parameter "Clusterupdate" obsolete (9.02)
- 36.23.7. Changes when converting images
- 36.23.8. Parts may also be imported into the PARTdataManager directory "Own parts"
- 36.24. Language dependent keys effect the output (9.02)
- 36.25. Save/restore database (9.02)
- 36.26. Adjust translations in the user interface (9.02)
- 36.27. Query capability for PARTconnection assemblies and parts (9.02)
- 36.28. Update ERPtable cyclically (9.02)
- 36.29. Installation path of $CADENAS_SETUP
- 36.30. Index language encompassing
- 36.31. Server-Client installation / Client configuration
- 36.32. Find keys in configuration file quickly
- 36.33. Define Database interface
- 36.34. Correct version numbers with Update Manager
- 36.35. Special notes when updating from V8.1
- 36.36. Update from V8.1 to V9 with ERP connection
- 36.37. Replace_std.cfg - Adjust paths after Update
- 36.38. CADENAS_LANGUAGE
- 36.39. Access privileges
- 36.40. CAD configuration
- 37. FAQ
- 38. Appendix
- Index