Identification information [Identification data]: See Section 7.17.9, “ Identification data ”.

Insert absolute level: See Section 7.6.2.2, “ Fixed plane ”.

Swap base levels [Exchange base planes]: See Section 7.6.4.3, “ Swap base planes (component) ”.

Move and/or rotate the entire component [Move/Rotate the complete part.]: See Section 7.6.4.5, “ Move/rotate... (component) ”.

Scaling [Scale]: See Section 7.6.4.4, “ Scale ”.

Mirror: See Section 7.6.4.6, “ Mirror ”.

Transparency:

Trade fairs [Measure]:

Edit [Edit...] (only for absolute level and reference level): Call up the editing dialog

Delete tarp [Delete plane]: Displays the Dependencies dialog, where you can confirm the deletion if necessary.

Paste copied sk [Paste sketch] etch: Pastes the sketch that was previously copied at sketch level with Copy (Sketch only) [Copy (only sketch)]. See Section 7.6.7.6, “ Copy (only sketch) ”.

New sketch: See Section 7.6.2.4, “ Sketch ”.

New 2D drawing: See Section 7.6.2.5, “ 2D drawing ”.

Create history (pipe): See Section 7.6.2.11, “ Pipe ”.

Insert new tarpaulin: See Section 7.6.2.3, “ Reference Plane ”.

Show [Visible]: Shows the currently selected layer permanently, even if another layer is clicked on. If you want to remove the layer again, you must deactivate this command (remove tick).

Transparency: This option allows you to make parts temporarily transparent for a better overview.

Trade fairs [Measure]:

Edit [Edit...]: Calling up the editing dialog

Delete: Displays the Dependencies dialog, where you can confirm the deletion if necessary.

Rename entry: The selected term is displayed in the 3D history [3D History] tree. (The renaming can also be done via Edit [Edit...] )

Feature attributes: Opens the Area attributes [Face attributes] docking window.

Select all related faces in 3D view

Patterns [Apply pattern]: See Section 7.6.2.10, “Grp Pattern / Pattern”.

Convert to section [Convert to cut] / Convert to base: See Section 7.6.8.8, “ Convert to section / Convert to base ”.

Set marker [Set mark]: See Section 7.6.3.5, “ Set mark ”.

Transparency: This option allows you to make parts temporarily transparent for a better overview.

Trade fairs [Measure]:

Edit [Edit...]: Calling up the editing dialog

Delete: Displays the Dependencies dialog, where you can confirm the deletion if necessary.

Rename entry: The selected term is displayed in the 3D history [3D History] tree. (The renaming can also be done via Edit [Edit...] )

Copy (Sketch only) [Copy (only sketch)]: See Section 7.6.7.6, “ Copy (only sketch) ”.

Cut out (incl. dependent) [Cut (including dependencies)]: See Section 7.6.7.7, “ Cut (including dependencies) ”.

Rotating [Rotate...] solids [Base]... / Extrusion [Extrude...]...: See Section 7.6.2.6, “ Base extrude / Base rotate ”.

Cut Rotate [Rotate...]... / Extrude [Extrude...]...: See Section 7.6.2.7, “ Cut extrude / Cut rotate ”.

Duplicate sketch: See Section 7.6.7.14, “ Duplicate sketch ”.

Create basic history [Create sweep base]: See Section 7.6.2.9, “ Sweep base / Sweep cut ”.

Create section history [Create sweep cut]: See Section 7.6.2.9, “ Sweep base / Sweep cut ”.

Set marker [Set mark]: See Section 7.6.3.5, “ Set mark ”.

Transparency: This option allows you to make parts temporarily transparent for a better overview.

Trade fairs [Measure]:

Edit [Edit...]: Calling up the editing dialog

Delete: Displays the Dependencies dialog, where you can confirm the deletion if necessary.

Rename entry: The selected term is displayed in the 3D history [3D History] tree. (The renaming can also be done via Edit [Edit...] )

Properties: Opens the 2D drawing dialog, see Section 7.6.2.5, “ 2D drawing ”.

Set marker [Set mark]: See Section 7.6.3.5, “ Set mark ”.

Transparency: This option allows you to make parts temporarily transparent for a better overview.

Trade fairs [Measure]:

Edit [Edit...]: Calling up the editing dialog

Delete: Displays the Dependencies dialog, where you can confirm the deletion if necessary.

Rename entry: The selected term is displayed in the 3D history [3D History] tree. (The renaming can also be done via Edit [Edit...] )

Feature attributes: Opens the Area attributes [Face attributes] docking window.

Select all associated surfaces in 3D view [Select all related faces in 3D view]:

Patterns [Apply pattern]: See Section 7.6.2.10, “Grp Pattern / Pattern”.

Convert to section [Convert to cut] / Convert to base: See Section 7.6.8.8, “ Convert to section / Convert to base ”.

Set marker [Set mark]: See Section 7.6.3.5, “ Set mark ”.

Paste copied sk [Paste sketch] etch: Pastes the sketch that was previously copied at sketch level with Copy (Sketch only) [Copy (only sketch)]. See Section 7.6.7.6, “ Copy (only sketch) ”.

(Not displayed, if more than one face is selected.)

Area attributes [Face attributes]: Opens the Area attributes [Face attributes] docking window.

Create new chamfer/rounding [New Chamfer/Fillet...]...: See Section 7.6.2.12, “ Blend ( add chamfer/rounding...) ”.

Create hole on marked area [Create drill on selected surface]: See Section 7.6.2.15, “ Drill Feature ”.

(Not displayed, if more than one face is selected.)

Create new sketch on marked area [Generate sketch on selected face]: See Section 7.6.2.4, “ Sketch ”.

(Not displayed, if more than one face is selected.)

Create new layer on selected area [Create plane on selected Face]: See Section 7.6.2.3, “ Reference Plane ”.

Visible in this configuration: See Section 7.6.10, “Level of detail”.

(Not displayed, if more than one face is selected.)